automatic transmission YAMAHA BEAR TRACKER 250 2002 Owners Manual

6-15 1. Shift pedal N. Neutral
1. Pédale de sélection N. Point mort
1. Pedal del cambio N. Punto muerto
EBU00201
Shifting
This model has a 5-speed forward and 1-speed re-
verse transmission with centrifugal automatic
clutch. The transmission allows you to control the
amount of power you have available at a given
speed or for starting accelerating, climbing, etc. To
shift into neutral, return the throttle lever to its orig-
inal position and repeatedly depress the shift ped-
al until it stops.CAUTION:
Do not coast for long periods with the engine
off, and do not tow the machine a long dis-
tance. Even with gears in neutral, the transmis-
sion is only properly lubricated when the
engine is running. Inadequate lubrication may
damage the transmission.
EE.book Page 15 Monday, June 25, 2001 2:27 PM

10-4
Carburetor:
Type / manufacturer BST34/1/MIKUNI
Spark plug:
Type / manufacturer DR7EA / NGK
Gap 0.6 ~ 0.7 mm
Clutch type: Wet, centrifugal automatic
Transmission:
Primary reduction system Spur gear
Primary reduction ratio 73/22 (3.318)
Secondary reduction system Shaft drive
Secondary reduction ratio 19/18
× 46/11 (4.414)
Transmission type Constant mesh, 5-speed forward, 1-speed reverse
Operation Left foot operation
Gear Ratio:
1st 34/12 (2.833)
2nd 34/19 (1.789)
3rd 29/22 (1.318)
4th 26/25 (1.040)
5th 23/28 (0.821)
Reverse 73/22
× 34/12
× 19/18 (9.924) Model YFM250X
EE.book Page 4 Monday, June 25, 2001 2:27 PM