engine YAMAHA BEAR TRACKER 250 2003 Manuale de Empleo (in Spanish)

9-5
7. Automotive type wax may be applied to all
painted and chrome plated surfaces. Avoid
combination cleaner-waxes. Many contain
abrasives which may mar the paint or protec-
tive finish.
When finished, start the engine and let it idle for
several minutes.
WARNING
Wet brakes may have reduced stopping ability,
increasing the chance of an accident. Test the
brakes after washing. Apply the brakes several
times at slow speeds to let friction dry out the
linings.
U4XE64.book Page 5 Thursday, May 30, 2002 1:49 PM

9-7
EBU00427
B. STORAGE
Long term storage (60 days or more) of your ma-
chine will require some preventive procedures to
guard against deterioration. After thoroughly
cleaning the machine, prepare for storage as fol-
lows:
1. Fill the fuel tank with fresh fuel and add fuel
stabilizer (if available).NOTE:Use of fuel stabilizer eliminates the need to drain
the fuel system. Consult a Yamaha dealer if the
fuel system is to be drained instead.2. Remove the spark plug, pour about one ta-
blespoon of SAE 10W30 or 20W40 motor oil
in the spark plug hole and reinstall the spark
plug. Ground the spark plug wire and turn the
engine over several times to coat the cylinder
wall with oil.
3. Lubricate all control cables.
4. Block up the frame to raise all wheels off the
ground.
U4XE64.book Page 7 Thursday, May 30, 2002 1:49 PM

10-2
10
Engine:
Type Air-cooled 4-stroke, SOHC
Cylinder arrangement Single cylinder, forward-inclined
Displacement 229.6 cm
3
Bore
× stroke 71
× 58 mm
Compression ratio 8.7:1
Starting system Electric starter and recoil starter
Lubrication system Wet sump
Engine oil:
Type
Quantity:
Periodic oil change (engine oil)
Periodic oil change
(engine oil with oil filter replacement)
Total amountSee page 5-13
1.5 L
1.6 L
1.8 L
Final gear oil:
Type SAE 80 API “GL-4” Hypoid Gear Oil
Quantity
Total amount 0.27 LModel YFM250X
E-10-E.fm Page 2 Monday, June 3, 2002 11:25 AM