overheating YAMAHA BEAR TRACKER 250 2004 Manuale de Empleo (in Spanish)

8-35
9. Install the foam cover onto the air filter ele-
ment.
10. Install the air filter element.
11. Install the air filter case cover by fastening the
holders.
12. Install the seat.NOTE:_ The air filter element should be cleaned every 20–
40 hours. It should be cleaned more often if the
ATV is operated in extremely dusty areas. Each
time air filter element maintenance is performed,
check the air inlet to the air filter case for obstruc-
tions. Check the air filter element rubber joint to the
carburetor and manifold fittings for an airtight seal.
Tighten all fittings securely to avoid the possibility
of unfiltered air entering the engine. _CAUTION:_ Never operate the engine with the air filter ele-
ment removed. This will allow unfiltered air to
enter, causing rapid engine wear and possible
engine damage. Additionally, operation with-
out the air filter element will affect carburetor
jetting with subsequent poor performance and
possible engine overheating. _
U4XE65.book Page 35 Tuesday, May 6, 2003 1:38 PM