transmission oil YAMAHA BLASTER 200 2005 Manuale de Empleo (in Spanish)

YAMAHA BLASTER 200 2005 Manuale de Empleo (in Spanish) BLASTER 200 2005 YAMAHA YAMAHA https://www.carmanualsonline.info/img/51/49389/w960_49389-0.png YAMAHA BLASTER 200 2005 Manuale de Empleo (in Spanish)

Page 15 of 388

YAMAHA BLASTER 200 2005  Manuale de Empleo (in Spanish) Engine oil ............................................5-13
Transmission oil .................................5-15
Chain ..................................................5-17
Throttle lever .........

Page 102 of 388

YAMAHA BLASTER 200 2005  Manuale de Empleo (in Spanish) 5-1
EBU00113
PRE-OPERATION CHECKS
Before using this machine, check the following points:
ITEM ROUTINE PAGE
Brakes9Check operation, free play, fluid level and fluid leakage. 5-5–5-7
9Fill with DOT 4

Page 116 of 388

YAMAHA BLASTER 200 2005  Manuale de Empleo (in Spanish) 5-15
EBU12891
Transmission oil
Make sure the transmission oil is at the specified
level. Add oil as necessary. (See pages 8-17–
8-23.)
cC
8In order to prevent clutch slippage (since
the transmission

Page 256 of 388

YAMAHA BLASTER 200 2005  Manuale de Empleo (in Spanish) 8-7INITIAL EVERY
month 1 3 6 6 12
ITEM ROUTINEWhichever
km 320 1200 2400 2400 4800 comes first
(mi) (200) (750) (1500) (1500) (3000)
hours 20 75 150 150 300
Transmission9Replace oil.2 222
9Check condi

Page 260 of 388

YAMAHA BLASTER 200 2005  Manuale de Empleo (in Spanish) INITIAL TOUS LES
Selon la
mois 1 3 6 6 12
DÉSCRIPTION VÉRIFICATIONpremière
km 320 1200 2400 2400 4800
occurrence
(mi) (200) (750) (1500) (1500) (3000)
heures 20 75 150 150 300
*Fonctionnement de 9C

Page 266 of 388

YAMAHA BLASTER 200 2005  Manuale de Empleo (in Spanish) EBU08371
Transmission oil
Transmission oil measurement
1. Place the machine on a level surface.
2. Warm up the engine for several minutes,
and stop it.
3. Check the oil level through the level window

Page 268 of 388

YAMAHA BLASTER 200 2005  Manuale de Empleo (in Spanish) q
1. Drain bolt1. Boulon de vidange1. Perno de drenaje
8-19
Transmission oil replacement
1. Place the machine on a level surface.
2. Warm up the engine for several minutes,
and stop it.
3. Place a con

Page 270 of 388

YAMAHA BLASTER 200 2005  Manuale de Empleo (in Spanish) 8-21
cC
8In order to prevent clutch slippage (since
the transmission oil also lubricates the
clutch), do not mix any chemical additives.
Do not use oils with a diesel specification
of “CD” or oils

Page 327 of 388

YAMAHA BLASTER 200 2005  Manuale de Empleo (in Spanish) 8-78
FBU00805
Lubrification de la chaîne de transmission
Il faut nettoyer et lubrifier la chaîne de transmis-
sion  aux  fréquences  spécifiées  dans  le  tableau
des  entretiens  et  graissages

Page 369 of 388

YAMAHA BLASTER 200 2005  Manuale de Empleo (in Spanish) 10-2
Model YFS200
Engine oil (2-cycle):
Type Air-cooled 2-stroke engine oil
Quantity 1.3 L
Transmission oil:
Type SAE 10W30 type SE motor oil
Recommended transmission oil 
classificationAPI Service SE