check oil YAMAHA BLASTER 200 2006 Owners Manual

YAMAHA BLASTER 200 2006 Owners Manual BLASTER 200 2006 YAMAHA YAMAHA https://www.carmanualsonline.info/img/51/49388/w960_49388-0.png YAMAHA BLASTER 200 2006 Owners Manual

Page 14 of 388

YAMAHA BLASTER 200 2006  Owners Manual LOCATION OF THE WARNING AND
SPECIFICATION LABELS .......................1-1
SAFETY INFORMATION .........................2-1
DESCRIPTION AND MACHINE
IDENTIFICATION.....................................3

Page 68 of 388

YAMAHA BLASTER 200 2006  Owners Manual 4-3
EBU00043
Indicator lights
EBU01274
Oil level warning light “7”
This light comes on when the oil level is low.
The light circuit can be checked by the following
procedure.
cC
Always make sure t

Page 70 of 388

YAMAHA BLASTER 200 2006  Owners Manual 4-5
EBU00757
Oil level warning light checking method
Start the engine.
Wait a few seconds.
Engine oil level and 
electrical circuit are OK.Supply engine oil.
Oil level warning light
does not come on
(

Page 102 of 388

YAMAHA BLASTER 200 2006  Owners Manual 5-1
EBU00113
PRE-OPERATION CHECKS
Before using this machine, check the following points:
ITEM ROUTINE PAGE
Brakes9Check operation, free play, fluid level and fluid leakage. 5-5–5-7
9Fill with DOT 4

Page 256 of 388

YAMAHA BLASTER 200 2006  Owners Manual EBU02622
PERIODIC MAINTENANCE/LUBRICATION
NOTE:8For ATVs not equipped with an odometer or an hour meter, follow the month maintenance intervals.
8For ATVs equipped with an odometer or an hour meter, f

Page 258 of 388

YAMAHA BLASTER 200 2006  Owners Manual 8-9
NOTE:
8Recommended brake fluid: DOT 4
8Brake fluid replacement:
9When disassembling the master cylinders or caliper cylinders, replace the brake fluid.
Normally check the brake fluid level and add

Page 266 of 388

YAMAHA BLASTER 200 2006  Owners Manual EBU08371
Transmission oil
Transmission oil measurement
1. Place the machine on a level surface.
2. Warm up the engine for several minutes,
and stop it.
3. Check the oil level through the level window

Page 272 of 388

YAMAHA BLASTER 200 2006  Owners Manual 8-23
7. Start the engine and warm it up for a few
minutes. While warming up, check for oil
leakage. If oil leakage is found, stop the
engine immediately, and check for the
cause.
8. Check the oil leve

Page 306 of 388

YAMAHA BLASTER 200 2006  Owners Manual 8Refill with the same type of brake fluid.
Mixing fluids may result in a harmful chemi-
cal reaction and lead to poor brake perfor-
mance.
8Be careful that water does not enter the
brake fluid reservo