air filter YAMAHA BREEZE 2003 Notices Demploi (in French)
[x] Cancel search | Manufacturer: YAMAHA, Model Year: 2003, Model line: BREEZE, Model: YAMAHA BREEZE 2003Pages: 350, PDF Size: 5.24 MB
Page 15 of 350
PERIODIC MAINTENANCE AND
ADJUSTMENT .........................................8-1
Owner’s manual and tool kit .................8-3
Periodic maintenance/Lubrication ........8-7
Engine oil ............................................8-13
Transmission oil .................................8-21
Spark plug inspection .........................8-27
Engine and V-belt compartment
air filter element cleaning .................8-31
Idle speed adjustment ........................8-41
Valve clearance adjustment ...............8-43
Throttle lever adjustment ....................8-43
Front and rear brake shoe
inspection .........................................8-45
Front brake lever free play
adjustment ........................................8-47
Rear brake adjustment .......................8-55
Drive chain slack check ......................8-57
Drive chain slack adjustment ..............8-59Lublicating and drive chain .................8-63
Draining the V-belt compartment ........8-65
Cable inspection and lubrication ........8-67
Brake lever lubrication ........................8-69
Knuckle shaft, lower arms and
steering shaft lubrication ..................8-69
Wheel removal ...................................8-71
Wheel installation ...............................8-71
Battery ................................................8-73
Replenishing the battery fluid .............8-77
Fuse replacement ...............................8-81
Replacing the headlight bulb ..............8-83
Tail/brake light bulb replacement .......8-87
Headlight beam adjustment ................8-89
Troubleshooting ..................................8-91
Troubleshooting chart .........................8-95
8
5VJ-9-60-01 3/26/02 9:18 PM Page 14
Page 209 of 350
7-67
Test your brakes after leaving the water. Do not
continue to ride your ATV without verifying that
you have regained proper braking ability.cCAfter riding your ATV in water, be sure to
drain the trapped water by removing the
check hose at the bottom of the air filter
case. Wash the ATV in fresh water if it has
been operated in salt water or muddy condi-
tions.
q
1. Check hose1. Flexible de contrôle1. Manguito de retención
5VJ-9-60-07 3/26/02 9:15 PM Page 68
Page 229 of 350
8-7
EBU00262PERIODIC MAINTENANCE/LUBRICATION
INITIAL EVERY
ITEM ROUTINE
13661
month
months months months
year
Valves*• Check valve clearance.
1111
• Adjust if necessary.
• Check condition.
Spark plug• Adjust gap and clean.11111• Replace if necessary.
Air filter element
• Clean. Every 20 – 40 hours
(for engine and V-belt
• Replace if necessary. (more often in wet or dusty areas)
compartment)
Carburetor*• Check idle speed/starter operation.
1111
• Adjust if necessary.
Cylinder head cover• Check breather hose for cracks or damage.
111
breather system*• Replace if necessary.
• Check leakage.
Exhaust system*• Retighten if necessary.111
• Replace gasket if necessary.
Fuel line*• Check fuel hose for cracks or damage.
111• Replace if necessary.
Engine oil• Replace (warm engine before draining).1111
Oil strainer*• Clean.
111
• Replace if necessary.
Drive chain• Check and adjust slack/alignment/clean/lube.11111
Transmission oil• Check oil level/oil leakage.
11
• Replace every 12 months.
5VJ-9-60-08 3/26/02 9:17 PM Page 8-8
Page 253 of 350
8-31
EBU00959Engine and V-belt case air filter element
cleaning
Both air filter elements should be cleaned at the
specified intervals in the periodic maintenance
chart.
Engine air filter elementNOTE:
There is a check hose at the bottom of the air fil-
ter case. If dust or water collects in this hose,
empty the hose and clean the air filter element
and air filter case.1. Remove the seat.
2. Remove the breather hose and then loosen
the clamp screw.
3. Remove the air filter case cover.
q
w
e
q
1. Check hose1. Flexible de contrôle1. Manguito de comprobación
1. Air filter case cover
2. Breather hose 3. Clamp1. Cache du boîtier de filtre à air
2. Reniflard 3. Bride1. Tapa de la caja del filtro de aire
2. Tubo de ventilación 3. Abrazadera
5VJ-9-60-08 3/26/02 9:17 PM Page 8-32
Page 255 of 350
8-33
4. Remove the air filter element, and separate
it from the frame.
5. Wash the air filter element gently but thor-
oughly in solvent.wAlways use parts cleaning solvent to clean
the air filter element. Never use low flash
point solvents or gasoline to clean the air fil-
ter element because the engine could catch
fire or explode.6. Squeeze the excess solvent out of the air fil-
ter element and let it dry.cCDo not twist the air filter element when
squeezing it.
q
w
1. Air filter element 2. Element frame1. Elément du filtre à air 2. Cadre de l’élément1. Elemento filtrante de aire 2. Bastidor del elemento
5VJ-9-60-08 3/26/02 9:17 PM Page 8-34
Page 257 of 350
8-35
7. Inspect the air filter element. If damaged,
replace it.
8. Apply SAE10W30 motor oil to the air filter
element.NOTE:
The air filter element should be wet but not drip-
ping.9. Install the air filter element on the frame.
10. Install the air filter element into the air filter
case.
11. Install the air filter case cover and tighten
the clamp screw.
q
1. Washer1. Rondelle1. Arandela
5VJ-9-60-08 3/26/02 9:17 PM Page 8-36
Page 259 of 350
8-37
NOTE:
The air filter element should be cleaned every
20 – 40 hours. It should be cleaned and lubricat-
ed more often if the machine is operated in
extremely dusty areas. Each time air filter ele-
ment maintenance is performed, check the air
inlet to the air filter case for obstructions. Check
the air filter case rubber joint to the carburetor
and manifold fittings for an airtight seal. Tighten
all fittings securely to avoid the possibility of
unfiltered air entering the engine.cCNever operate the engine with the air filter
element removed. This will allow unfiltered
air to enter, causing rapid engine wear and
possible engine damage. Additionally, opera-
tion without the air filter element will affect
carburetor jetting with subsequent poor per-
formance and possible engine overheating.
5VJ-9-60-08 3/26/02 9:17 PM Page 8-38
Page 261 of 350
8-39
V-belt case air filter element
1. Remove the front cover by removing the
screws and bolts.
2. Remove the air filter element cover.
3. Pull out the air filter element.
4. Tap the air filter element lightly to remove
most of the dust and dirt. Blow out the
remaining dirt with compressed air. If the air
filter element is damaged, replace it.
5. Assemble by reversing the removal proce-
dure. Be sure the air filter element is seated
properly against the case.
2
21
3 3
w
q
e
1. Front cover 2. Screw (
× 2) 3. Bolt (× 2)
1. Cache avant 2. Vis (×2) 3. Boulon (×2)1. Tapa frontal 2. Tornillo (× 2) 3. Tapón (× 2)
1. Element cover 2. Screw 3. Element1. Cache de l’élément 2. Vis 3. Elément1. Tapa del elemento 2. Tornillo 3. Elemento
5VJ-9-60-08 3/26/02 9:17 PM Page 8-40
Page 333 of 350
10-3
Model YFA1
Air filter:
for engine Wet type element
for V-belt compartment Dry type element
Fuel:
Type Regular unleaded gasoline only
Fuel tank capacity 7.0 LFuel reserve amount 1.3 L
Carburetor:Type/manufacturer VM18SH/MIKUNI
Spark plug:
Type/manufacturer CR7HS/NGKGap 0.6–0.7 mmClutch type: Dry, centrifugal automatic
Transmission:
Primary reduction system Helical gear/Spur gear
Primary reduction ratio 43/14 ×40/17 (7.226)
Secondary reduction system Chain drive
Secondary reduction ratio 32/12 (2.666)
Transmission type/Reduction ratio V-belt automatic/2.30 – 0.82
Reverse (2.30 – 0.82) ×49/14 ×49/15 ×40/17
(61.874 – 22.059)
5VJ-9-60-09~11 3/26/02 9:18 PM Page 14