brake YAMAHA BREEZE 2004 Manuale de Empleo (in Spanish)
[x] Cancel search | Manufacturer: YAMAHA, Model Year: 2004, Model line: BREEZE, Model: YAMAHA BREEZE 2004Pages: 350, tamaño PDF: 5.26 MB
Page 13 of 350
LOCATION OF THE WARNING AND
SPECIFICATION LABELS .......................1-1
SAFETY INFORMATION .........................2-1
DESCRIPTION AND MACHINE
IDENTIFICATION.....................................3-1
Identification number records ...............3-3
Key identification number .....................3-5
Vehicle identification number ...............3-5
Model label ...........................................3-7
CONTROL FUNCTIONS..........................4-1
Main switch ...........................................4-1
Indicator lights ......................................4-3Handlebar switches ..............................4-5
Throttle lever ........................................4-9
Speed limiter ......................................4-11
Front brake lever ................................4-13
Rear brake lever .................................4-13
Parking brake .....................................4-15
Drive select lever ................................4-17
Fuel tank cap ......................................4-17
Fuel cock ............................................4-19
Starter (choke) ....................................4-21
Seat ....................................................4-23
PRE-OPERATION CHECKS ...................5-1
Front and rear brakes ...........................5-5
Fuel ......................................................5-7
EBU00015
CONTENTS
1
2
3
45
5VJ-9-61-01 3/14/03 11:48 PM Page 12
Page 15 of 350
PERIODIC MAINTENANCE AND
ADJUSTMENT .........................................8-1
Owner’s manual and tool kit .................8-3
Periodic maintenance/Lubrication ........8-7
Engine oil ............................................8-13
Transmission oil .................................8-21
Spark plug inspection .........................8-27
Engine and V-belt compartment
air filter element cleaning .................8-31
Idle speed adjustment ........................8-41
Valve clearance adjustment ...............8-43
Throttle lever adjustment ....................8-43
Front and rear brake shoe
inspection .........................................8-45
Front brake lever free play
adjustment ........................................8-47
Rear brake adjustment .......................8-55
Drive chain slack check ......................8-57
Drive chain slack adjustment ..............8-59Lubricating and drive chain ................8-63
Draining the V-belt compartment ........8-65
Cable inspection and lubrication ........8-67
Brake lever lubrication ........................8-69
Knuckle shaft, lower arms and
steering shaft lubrication ..................8-69
Wheel removal ...................................8-71
Wheel installation ...............................8-71
Battery ................................................8-73
Replenishing the battery fluid .............8-77
Fuse replacement ...............................8-81
Replacing the headlight bulb ..............8-83
Tail/brake light bulb replacement .......8-87
Headlight beam adjustment ................8-89
Troubleshooting ..................................8-91
Troubleshooting chart .........................8-958
5VJ-9-61-01 3/14/03 11:48 PM Page 14
Page 43 of 350
2-13
8Never operate an ATV in fast flowing water or
in water deeper than that recommended in
this manual. Remember that wet brakes may
have reduced stopping ability. Test your
brakes after leaving water. If necessary, apply
them several times to let friction dry out the
linings.
8Always be sure there are no obstacles or peo-
ple behind you when you operate in reverse.
When it is safe to proceed in reverse, go
slowly.
8Always use the size and type tires specified in
this manual.
8Always maintain proper tire pressure as
described in this manual.
8Never modify an ATV through improper instal-
lation or use of accessories.
5VJ-9-61-02 3/14/03 11:49 PM Page 14
Page 49 of 350
3-1
EBU00032
DESCRIPTION AND MACHINE
IDENTIFICATION
1. Seat 11. Rear brake lever
2. Drive select lever 12. Parking brake
3. Headlight 13. Reverse indicator light
4. Front cover 14. Neutral indicator light
5. Front wheel 15. Front brake lever
6. Starter (choke) 16. Throttle lever
7. Fuel cock 17. Main switch
8. Rear wheel 18. Fuel tank cap
9. Tail/brake light 19. Handlebar switches
10. Footboard
NOTE:
The machine you have purchased may differ
slightly from those shown in the figures of this
manual.
wqer
!5!2!1
!3
!4
!6
!9!8!7
!0
i uyto
5VJ-9-61-03 3/14/03 11:49 PM Page 2
Page 69 of 350
4-13
EBU00070
Front brake lever
The front brake lever is located on the right han-
dlebar. Pull it toward the handlebar to apply the
front brake.
EBU00072
Rear brake lever
The rear brake lever is located on the left han-
dlebar. Pull it toward the handlebar to apply the
rear brake.
q
q
1. Front brake lever1. Levier de frein avant1. Palanca del freno delantero
1. Rear brake lever
1. Levier de frein arrière1. Palanca del freno trasero
5VJ-9-61-04 3/17/03 4:47 PM Page 14
Page 71 of 350
4-15
EBU00075
Parking brake
Use the parking brake when you have to start
the engine or park the machine, especially on a
slope. Apply the rear brake lever and push down
the lock plate to apply the parking brake.
Squeeze the rear brake lever to release the
parking brake.
w
8Always set the parking brake before start-
ing the engine. The ATV could start mov-
ing unexpectedly if the parking brake is
not applied. This could cause loss of con-
trol or a collision.
8Always be sure you have released the
parking brake before you begin to ride.
The brake could overheat if you ride the
ATV without releasing the parking brake.
You could lose braking performance
which could cause an accident. You could
also wear out the brakes prematurely.
q
1. Lock plate1. Frein d’écrou1. Placa de bloqueo
5VJ-9-61-04 3/17/03 4:47 PM Page 16
Page 81 of 350
5-1
EBU00113
PRE-OPERATION CHECKS
Before using this machine, check the following points:
ITEM ROUTINE PAGE
Brakes• Check operation, condition and free play. 5-5 – 5-7,
• Adjust if necessary. 8-45 – 8-55
Fuel • Check fuel level.
• Fill with fuel if necessary.5-7 – 5-11
Engine oil and• Check oil level. 5-11 – 5-15,
transmission oil• Fill with oil if necessary. 8-13 – 8-25
Drive chain• Check chain slack and condition.
5-15, 8-57 – 8-63
• Adjust if necessary.
Throttle• Check for proper throttle cable operation. 5-15
Wheels and tires• Check tire pressure, wear and damage. 5-19 – 5-25, 8-71
Fittings and fasteners• Check all fittings and fasteners. 5-15
Battery• Check fluid level.
5-17, 8-73 – 8-79
• Fill with distilled water if necessary.
Lights and switches• Check for proper operation. 5-17, 8-83 – 8-87
5VJ-9-61-05 3/17/03 4:50 PM Page 2
Page 85 of 350
5-5
EBU00473
Front and rear brakes
1. Brake levers
Check for correct free play in the brake
levers. If the free play is incorrect, adjust it.
(See pages 8-47 – 8-55.)
Check operation of the levers. They should
move smoothly and there should be a firm
feeling when the brake is applied. If not,
have the machine inspected by a Yamaha
dealer.
2. Brake operation
Test the brakes at slow speed after starting
out to make sure they are working properly.
If the brakes do not provide proper braking
performance, inspect the brakes for wear.
(See page 8-45.)
5VJ-9-61-05 3/17/03 4:50 PM Page 6
Page 87 of 350
5-7
w
Always check the brakes at the start of every
ride. Do not ride the ATV if you find any
problem with the brakes or you could lose
braking ability, which could lead to an acci-
dent. If a problem cannot be corrected by the
adjustment procedures provided in this man-
ual, have the ATV inspected by a Yamaha
dealer.
EBU00998
Fuel
Make sure there is sufficient gasoline in the
tank.
q
w
1. Filler tube 2. Fuel level1. Tube de remplissage 2. Niveau de carburant1. Tubo de llenado 2. Nivel de combustible
5VJ-9-61-05 3/17/03 4:50 PM Page 8
Page 97 of 350
5-17
EBU01162
Fittings and fasteners
Always check the tightness of chassis fittings
and fasteners before a ride. Take the machine
to a Yamaha dealer or refer to the Service
Manual for correct tightening torque.
EBU00803
Lights
Check the headlight and tail/brake light to make
sure they are in working condition. Repair as
necessary for proper operation.
EBU11700
Switches
Check the operation of all switches. Have a
Yamaha dealer repair as necessary for proper
operation.
EBU00499
Battery
Check fluid level and fill if necessary. Use only
distilled water if refilling is necessary. (See
pages 8-73–8-79.)
5VJ-9-61-05 3/17/03 4:50 PM Page 18