cam YAMAHA GRIZZLY 350 2007 Owners Manual

8-32
83. Push the brake camshaft lever in direction (a)
until it stops [apply approximately 47 N (10.6
lbf) (4.8 kgf) of force], and then turn the brake
pedal free play adjusting nut on the brake ca-
ble at the final gear case so that gap “A” mea-
sures 2.5–3.0 mm (0.10–0.12 in).4. Push the brake camshaft lever in direction (a)
until it stops [apply approximately 47 N (10.6
lbf) (4.8 kgf) of force], and then turn the brake
lever free play adjusting nut on the brake ca-
ble at the final gear case so that gap “B” mea-
sures 4.0–6.0 mm (0.16–0.24 in).
1. Brake lever free play adjusting nut
1. Brake pedal free play adjusting nut
2. Brake camshaft lever
3. Gap “A”
U4S260E0.book Page 32 Tuesday, October 3, 2006 1:53 PM

8-33
8 5. Check the brake lever free play and, if neces-
sary, adjust it by turning the brake lever free
play adjusting bolt at the brake lever. Turn the
brake lever free play adjusting bolt in direction
(a) to increase the free play, and in direction
(b) to decrease it.6. Tighten the locknut at the brake lever.
NOTE:When adjusting the rear brake lever free play:
Be sure not to step on the brake pedal.
Make sure the brake pedal does not move.
Checking the brake pedal position
The top of the brake pedal should be positioned
75.0–85.0 mm (2.95–3.35 in) above the footboard.
If the brake pedal position is incorrect, have a
Yamaha dealer adjust it.
1. Brake lever free play adjusting nut
2. Brake camshaft lever
3. Gap “B”
1. Locknut
2. Brake lever free play adjusting bolt
U4S260E0.book Page 33 Tuesday, October 3, 2006 1:53 PM