torque YAMAHA GRIZZLY 350 2016 User Guide

8-33
8Adjusting the brake pedal free play
The brake pedal free play should measure 20.0–
30.0 mm (0.79–1.18 in) as shown. If the free play is
incorrect, adjust it as follows. 1. Fully loosen the brake lever free play adjust-
ing nut on the brake cable at the rear wheel
hub.
2. Turn the brake pedal free play adjusting nut on the brake cable at the rear wheel hub in di-
rection (a) to increase the free play, and in di-
rection (b) to decrease it.
1. Footboard bolt A
2. Footboard bolt BTightening torques:Footboard bolt A:3.0 Nm (0.30 m·kgf, 2.2 ft·lbf)
Footboard bolt B: 7 Nm (0.7 m·kgf, 5.1 ft·lbf)11
2
1. Brake pedal free play
U1NS64E0.book Page 33 Thursday, June 25, 2015 8:36 AM

8-47
8
Tapered nuts are used for both the front and
rear wheels. Install the nuts with their tapered
side towards the wheel.

3. Lower the ATV to the ground.
4. Tighten the wheel nuts to the specified
torques.
1. Arrow mark
1. Tapered nutTightening torques:Front wheel nut:55 Nm (5.5 m·kgf, 40 ft·lbf)
Rear wheel nut: 55 Nm (5.5 m·kgf, 40 ft·lbf)
U1NS64E0.book Page 47 Thursday, June 25, 2015 8:36 AM