length YAMAHA GRIZZLY 450 2016 Owners Manual

10-1
10
EBU25962
SPECIFICATIONS
Dimensions:Overall length:1993 mm (78.5 in)
Overall width: 1093 mm (43.0 in)
Overall height:
1120 mm (44.1 in)
Seat height: 840 mm (33.1 in)
Wheelbase: 1233 mm (48.5 in)
Ground clearance:
245 mm (9.6 in)
Minimum turning radius: 3000 mm (118 in)Weight:Curb weight:
276.0 kg (607 lb) (YFM45GDXG)
282.0 kg (620 lb) (YFM45GPHG, YFM45GPXG)Noise and vibration level:Noise level (77/311/EEC):78.3 dB(A) (YFM45GDXG_EUR/FRA/GBR,
YFM45GPHG, YFM45GPXG_EUR/FRA/GBR)
Uncertainty of measurement: 3.0 dB(A) (YFM45GDXG_EUR/FRA/GBR, YFM45GPHG,
YFM45GPXG_EUR/FRA/GBR) Vibration on seat (EN1032, ISO5008):
0.6 m/s² (YFM45GDXG_EUR/FRA/GBR)
1.0 m/s² (YFM45GPHG, YFM45GPXG_EUR/FRA/GBR)
Uncertainty of measurement:
0.3 m/s² (YFM45GDXG_EUR/FRA/GBR, YFM45GPHG,
YFM45GPXG_EUR/FRA/GBR)
Vibration on handle (EN1032, ISO5008):
2.9 m/s² (YFM45GDXG_EUR/FRA/GBR)
Will not exceed 2.5 m/s² (YFM45GPHG,
YFM45GPXG_EUR/FRA/GBR)
Uncertainty of measurement: 0.5 m/s² (YFM45GDXG_EUR/FRA/GBR)
0.6 m/s² (YFM45GPHG, YFM45GPXG_EUR/FRA/GBR)
Engine:Engine type:
Liquid cooled 4-stroke, SOHC
Cylinder arrangement: Single cylinder
Displacement: 421 cm³
Bore × stroke:
84.5 × 75.0 mm (3.33 × 2.95 in)
Compression ratio: 10.0 : 1
Starting system: Electric starter
Lubrication system:
Wet sump
U2LC62E0.book Page 1 Monday, May 11, 2015 2:28 PM

10-5
10
Coolant temperature warning light:LED
Park indicator light: LED
On-Command four-wheel-drive/differential gear lock
indicator: LCD
High-range indicator light:
LED
Low-range indicator light: LED
Differential gear lock indicator light: LED
EPS warning light:
12 V, 1.7 W (YFM45GPHG, YFM45GPXG)Fuses:Main fuse:30.0 A
EPS fuse:
40.0 A (YFM45GPHG, YFM45GPXG)
Headlight fuse: 15.0 A
Signaling system fuse: 10.0 A
Ignition fuse:
10.0 A
Auxiliary DC jack fuse: 10.0 A
Backup fuse: 10.0 A (YFM45GDXG)
5.0 A (YFM45GPHG, YFM45GPXG) Four-wheel-drive motor fuse:
10.0 A
EBU30402For Europe only
The figures quoted are emission levels and are not
necessarily safe working levels. Whilst there is a
correlation between the emission and exposure
levels, this cannot be used reliably to determine
whether or not further precautions are required.
Factors that influence the actual level of exposure
of work-force include the characteristics of the
work room, the other sources of noise, etc. i.e. the
number of machines and other adjacent process-
es, and the length of time for which an operator is
exposed to the noise. Also the permissible expo-
sure level can vary from country. This information,
however, will enable the user of the machine to
make a better evaluation of the hazard and risk.
U2LC62E0.book Page 5 Monday, May 11, 2015 2:28 PM