length YAMAHA GRIZZLY 700 2020 Owners Manual

11-1
11
EBU25964
SPECIFICATIONS
EBU38810TIPThe 4-digit model type code can be confirmed by
checking the model label. (See page 1-1.) Dimensions:Overall length:2070 mm (81.5 in)
Overall width: 1230 mm (48.4 in) (BDE2, BDE7, BDEA, BDEE, BDE3)
1250 mm (49.2 in) (BDEJ, BDEK)
Overall height: 1253 mm (49.3 in) (BDE2, BDE7, BDEA, BDEE, BDE3)
1270 mm (50.0 in) (BDEJ, BDEK)
Seat height: 918 mm (36.1 in) (BDE2, BDE7, BDEA, BDEE, BDE3)
930 mm (36.6 in) (BDEJ, BDEK)
Wheelbase: 1250 mm (49.2 in)
Ground clearance: 288 mm (11.3 in) (BDE2, BDE7, BDEA, BDEE, BDE3)
300 mm (11.8 in) (BDEJ, BDEK)
Minimum turning radius: 3.7 m (12.14 ft)
Maximum water depth:
35 cm (14 in)
Weight:Curb weight:313.0 kg (690 lb) (BDE3)
325.0 kg (716 lb) (BDE2)
330.0 kg (728 lb) (BDE7, BDEA, BDEE)
342.0 kg (754 lb) (BDEK)
354.0 kg (780 lb) (BDEJ)Loading:Maximum loading limit:240.0 kg (530 lb)
(Total weight of rider, cargo, accessories, and tongue)Noise and vibration level:Noise level (77/311/EEC):
78.0 dB(A) at 3125 r/min (BDE2, BDE7, BDEA, BDEE)
79.0 dB(A) at 3125 r/min (BDEJ)
Uncertainty of measurement:
0.5 dB(A) (BDEJ)
0.6 dB(A) (BDE2, BDE7, BDEA, BDEE)
Vibration on seat (EN1032, ISO5008):
Will not exceed 0.5 m/s² (BDE2, BDE7, BDEA, BDEE,
BDEJ)
Uncertainty of measurement:
0.0 m/s² (BDE2, BDE7, BDEA, BDEE, BDEJ)
Vibration on handle (EN1032, ISO5008): Will not exceed 2.5 m/s² (BDE2, BDE7, BDEA, BDEE,
BDEJ)
Uncertainty of measurement: 0.2 m/s² (BDE2, BDE7, BDEA, BDEE, BDEJ)
UBDE60E0.book Page 1 Monday, April 22, 2019 4:12 PM

11-6
11
Headlight fuse:10.0 A
Signaling system fuse: 10.0 A
Ignition fuse:
10.0 A
Auxiliary DC jack fuse: 10.0 A
Fuel injection system fuse: 15.0 A
Four-wheel-drive motor fuse:
10.0 A
Radiator fan motor fuse: 20.0 A
EPS fuse: 40.0 AEBU30403Noise and vibration levels statement (for Eu-
rope)
The figures quoted are emission levels and are not
necessarily safe working levels. Whilst there is a
correlation between the emission and exposure
levels, this cannot be used reliably to determine
whether or not further precautions are required.
Factors that influence the actual level of exposure
of work-force include the characteristics of the
work room, the other sources of noise, etc. i.e. the number of machines and other adjacent process-
es, and the length of time for which an operator is
exposed to the noise. Also the permissible expo-
sure level can vary from country. This information,
however, will enable the user of the machine to
make a better evaluation of the hazard and risk.
EBU38670CO2 emissions levels statement (for Europe)
This CO2 measurement results from testing over a
fixed test cycle under laboratory conditions a(n)
(parent) engine representative of the engine type
(engine family) and shall not imply or express any
guarantee of the performance of a particular en-
gine.
UBDE60E0.book Page 6 Monday, April 22, 2019 4:12 PM