fuel type YAMAHA KODIAK 450 2020 Owners Manual

10-3
10
Differential gear oil:Type:Yamaha Friction Modified Plus Shaft Drive Oil (Part No.: ACC-SHAFT-PL-32) or SAE 80 API GL-4 Hypoid gear oil
(B5R1/B5R2/B5R3)
Yamaha Friction Modified Shaft Drive Gear Oil or SAE 80 API GL-4 Hypoid gear oil
(BJ5H/BB5R/BJ5D/BJ5E/BB5M)
Quantity: 0.23 L (0.24 US qt, 0.20 Imp.qt) (B5R1/B5R2/B5R3)
0.35 L (0.37 US qt, 0.31 Imp.qt)
(BJ5H/BB5R/BJ5D/BJ5E/BB5M)Coolant quantity:Radiator (including all routes):1.32 L (1.40 US qt, 1.16 Imp.qt)
Coolant reservoir (up to the maximum level mark): 0.25 L (0.26 US qt, 0.22 Imp.qt)Air filter:Air filter element:Wet element
Air filter oil grade: Foam air-filter oilFuel:Recommended fuel:Regular unleaded gasoline (Gasohol [E10] acceptable)
Minimum research octane: 91
Fuel tank capacity:
14 L (3.7 US gal, 3.1 Imp.gal)
Fuel reserve amount: 4.0 L (1.06 US gal, 0.88 Imp.gal)
Throttle body:ID mark:BB51 00Spark plug (s):Manufacturer/model:NGK/DR7EA
Spark plug gap: 0.6–0.7 mm (0.024–0.028 in)Drivetrain:Primary reduction ratio:1.000
Secondary reduction ratio: 7.944 (39/24 x 24/18 x 33/9)
Final drive:
Shaft
Clutch type: Wet, centrifugal, shoe
Transmission type: CVT automatic with reverse
Gear ratio:
Transmission ratio:2.550–0.750 : 1
Reverse gear:
1.706 (29/17)
Low range: 2.813 (45/16)
High range: 1.652 (38/23)Front tire:Size:AT25x8-12
UBB562E0.book Page 3 Thursday, March 14, 2019 9:59 AM

10-6
10
Fuel injection system fuse:10.0 A
Four-wheel-drive motor fuse: 10.0 A (B5R1/B5R2/B5R3)
3.0 A (BJ5H/BB5R/BJ5D/BJ5E/BB5M)
Radiator fan motor fuse: 20.0 A
EPS fuse:
40.0 A (YFM450FWBD, YFM45KPAL)EBU30403Noise and vibration levels statement (for Eu-
rope)
The figures quoted are emission levels and are not
necessarily safe working levels. Whilst there is a
correlation between the emission and exposure
levels, this cannot be used reliably to determine
whether or not further precautions are required.
Factors that influence the actual level of exposure
of work-force include the characteristics of the
work room, the other sources of noise, etc. i.e. the
number of machines and other adjacent process-
es, and the length of time for which an operator is
exposed to the noise. Also the permissible expo-
sure level can vary from country. This information,
however, will enable the user of the machine to
make a better evaluation of the hazard and risk.
EBU38670CO2 emissions levels statement (for Europe)
This CO2 measurement results from testing over a
fixed test cycle under laboratory conditions a(n)
(parent) engine representative of the engine type
(engine family) and shall not imply or express any
guarantee of the performance of a particular en-
gine.
UBB562E0.book Page 6 Thursday, March 14, 2019 9:59 AM