wheel bolts YAMAHA KODIAK 700 2018 Owners Manual
[x] Cancel search | Manufacturer: YAMAHA, Model Year: 2018, Model line: KODIAK 700, Model: YAMAHA KODIAK 700 2018Pages: 172, PDF Size: 4.52 MB
Page 55 of 172
5-2
5
Front brakeβ’ Check operation. If soft or spongy, have Yamaha dealer bleed hy-
draulic system.
β’ Check brake pads for wear, and replace if necessary.
β’ Check brake fluid level in reservoir, and add specified brake fluid to specified level if necessary.
β’ Check hydraulic system for leakage. Correct if necessary. 5-3, 8-42, 8-43, 8-45
Rear brake β’ Check operation, and correct if necessary.
β’ Lubricate cables if necessary.
β’ Check lever and pedal free play, and adjust if necessary. 5-3, 8-42, 8-45
Throttle lever β’ Make sure that operation is smooth. Lubricate cable and lever
housing if necessary.
β’ Check lever free play, and adjust if necessary. 5-4, 8-41
Control cables β’ Make sure that operation is smooth. Lubricate if necessary. 8-49
Wheels and tires β’ Check wheel condition, and replace if damaged.
β’ Check tire condition and tread depth. Replace if necessary.
β’ Check air pressure. Correct if necessary. 5-4
Brake pedal β’ Make sure that operation is smooth. Lubricate pedal pivoting point
if necessary. 8-50
Brake levers β’ Make sure that operation is smooth. Lubricate lever pivoting points
if necessary. 8-49
Axle boots β’ Check for cracks or damage, and replace if necessary. 8-48
Chassis fasteners β’ Make sure that all nuts, bolts and screws are properly tightened. 5-6
Instruments, lights and
switches β’ Check operation, and correct if necessary. 5-6
ITEM ROUTINE PAGE
UB1662E0.book Page 2 Monday, April 17, 2017 11:39 AM
Page 95 of 172
8-6
8
4*Brake hoses β’ Check for cracks or other damage, and replace if
necessary. ββββ
β’ Replace. Every 4 years
5 *Brake fluid β’ Change. Every 2 years
6 *Wheels β’ Check runout and for damage, and replace if nec-
essary. β βββ
7 *Tires β’ Check tread depth and for damage, and replace if
necessary.
β’ Check air pressure and balance, and correct if necessary. β βββ
8 *Wheel hub bearings β’ Check for looseness or damage, and replace if
necessary. β βββ
9 *V- b e l t β’ Check for wear, cracks or other damage, and re-
place if necessary. β βββ
10 *Chassis fasteners β’ Make sure that all nuts, bolts, and screws are
properly tightened. βββββ
11 *Shock absorber as-
semblies β’ Check operation and correct if necessary.
β’ Check for oil leakage and replace if necessary.
βββ
12 *Stabilizer bushes β’ Check for cracks or other damage, and replace if
necessary. βββ
13 *Rear knuckle pivots β’ Lubricate with lithium-soap-based grease. βββ
NO.
ITEM CHECK OR MAINTENANCE
JOB INITIAL
EVERY
Whichev- er comes first month136612
km (mi) 320
(200) 1300
(800) 2500
(1600) 2500
(1600) 5000
(3200)
hours 20 80 160 160 320
UB1662E0.book Page 6 Monday, April 17, 2017 11:39 AM