change time YAMAHA MT-125 2021 Owners Manual

Instrument and control functions
3-10
3
Bri
ghtness screen an d shift timin g
in dicator li ght control mo de
This mode cycles through five control
functions in the order listed below.  Brightness screen: the multi-func-
tion meter unit can be adjusted for
the brightness screen.
 Shift timing light flashing pattern:
this function allows you to choose
whether or not the indicator light
will come on and whether it should
flash or stay on when activated.
 Shift timing light activation point:
this function allows you to select
the engine speed at which the in-
dicator light is activated. 
Shift timing light deactivation
point: this function allows you to
select the engine speed at which
the indicator light is deactivated.
 Shift timing light brightness: this
function allows you to adjust the
brightness of the indicator light.
To adjust the brightness screen and
shift timing indicator light1. Turn the key to “ ”.
2. Push and hold the “SELECT” but- ton.
3. Turn the key to “ ”, and then re- lease the “SELECT” button after
five seconds. After that push the
“SELECT” button again. The
brightness screen can now be ad-
justed.
To set the brightness screen1. Push the “RESET” button to select the desired brightness level.
2. Push the “SELECT” button to confirm the selected brightness
screen level. The brightness
screen light changes to the shift
flashing pattern setting mode. To set the shift flashing pattern
1. Push the “RESET” button to select
one of the following flashing pat-
tern settings: On: the indicator light stays
on when activated. (This set-
ting is selected when the indi-
cator light stays on.)
 Flash: the indicator light
flashes when activated. (This
setting is selected when the
indicator light flashes four
times per second.)
 Off: the indicator light is deac-
tivated; in other words, it
does not come on or flash.
(This setting is selected when
the indicator light flashes
once every two seconds.)
2. Push the “SELECT” button to con- firm the selected flashing pattern.
The shift timing indicator light
changes to the activation point
setting mode.
The tachometer will show the current
setting r/min for the activation point
and deactivation point setting modes.
1. Shift timing indicator light
2. Brightness level displayZAUM1580
21
UB6GE1E0.book Page 10 Thursday, July 30, 2020 1:08 PM