low beam YAMAHA RHINO 660 2005 Manuale de Empleo (in Spanish)

Brake pedal and accelerator pedal
lubrication ....................................... 8-101
Rear knuckle upper and lower pivot
lubrication ....................................... 8-101
Steering shaft lubrication .................. 8-103
Wheel removal ................................. 8-103
Wheel installation ............................. 8-105
Battery .............................................. 8-107
Battery maintenance ........................ 8-111
Fuse replacement............................. 8-113
Replacing a headlight bulb ............... 8-119
Headlight beam adjustment.............. 8-123
Tail/brake light bulb replacement ..... 8-125
Troubleshooting................................ 8-131
Troubleshooting charts ..................... 8-133
CLEANING AND STORAGE ................... 9-1
A. Cleaning ........................................... 9-1
B. Storage ............................................ 9-7
SPECIFICATIONS ................................ 10-1
910U5UG61.book Page 3 Monday, September 6, 2004 9:00 AM

4-19 1. Light switch “OFF/ /”
1. Contacteur d’éclairage “OFF/ /”
1. Interruptor de luces “OFF/ /”
L
H
L
H
L
H
EVU00230
Switches
EVU00240
Light switch “OFF/ /”
Set the switch to “” to turn on the low beam and
the taillights.
Set the switch to “” to turn on the high beam
and the taillights.
Set the switch to “OFF” to turn off all the lights.CAUTION:_ Do not use the headlights with the engine
turned off for an extended period of time. The
battery may discharge to the point that the
starter motor will not operate properly. If this
should happen, remove the battery and re-
charge it. _
L
H
LH
U5UG61.book Page 19 Monday, September 6, 2004 9:00 AM

8-123 1. Headlight beam adjusting screw
1. Vis de réglage du faisceau de phare
1. Tornillo de ajuste de la luz del faro
EVU00990
Headlight beam adjustmentCAUTION:_ It is advisable to have a Yamaha dealer make
this adjustment. _To raise the beam, turn the adjusting screw in di-
rection
a.
To lower the beam, turn the adjusting screw in di-
rection
b.
U5UG61.book Page 123 Monday, September 6, 2004 9:00 AM