key YAMAHA RHINO 700 2010 Manuale de Empleo (in Spanish)

NOTICE
A NOTICE indicates special precautions that
must be taken to avoid damage to the vehicle
or other property.TIP
A TIP provides key information to make proce-
dures easier or clearer.
*Product and specifications are subject to change
without notice.
EE.book Page 3 Monday, January 19, 2009 5:30 PM

4-1 1. Main switch 2.“” (Off)
3.“” (On) 4.“” (Start)
1. Contacteur à clé2.“” (arrêt)
3.“” (contact) 4.“” (démarrage)
1. Interruptor principal 2.“” (Apagado)
3.“” (Contacto) 4.“” (Arranque)
1
2
3
4
EVU00130
1 -INSTRUMENT AND CONTROL
FUNCTIONS
EVU00140
Main switch
Functions of the respective switch positions are as
follows:
“” (On):
All electrical circuits are supplied with power.TIPTIPThe helmet/seat belt indicator light comes on and
stays on while the key is turned to “” (on).“” (Off):
All electrical circuits are switched off. The key
can be removed in this position.TIPIf the key is turned to the “” (off) position when
the On-Command drive knob is in the “DIFF UN-
LOCK” position, a locking sound may be heard
from the rear differential gear. (See page 4-39 for
more information on the On-Command drive
knob.)
EE.book Page 1 Monday, January 19, 2009 5:30 PM

4-3
“” (Start):
The electric starter is engaged by turning and
holding the key in this position. Release the
key when the engine starts.
EE.book Page 3 Monday, January 19, 2009 5:30 PM

4-5
1. On-Command drive indicator “”/“”/“”/“”
2. On-Command differential gear lock indicator light “DIFF. LOCK”
3. Engine trouble warning light “”
4. Coolant temperature warning light “”
5. Electric Power Steering warning light “EPS”
6. Parking brake indicator light “P”7. Reverse indicator light “R”
8. Neutral indicator light “N”9. High-range indicator light “H”
10. Low-range indicator light “L”
11. Helmet/seat belt indicator light “ / ”
1. Indicateur de mode de conduite “”/“”/“”/“”
2. Témoin de blocage du différentiel “DIFF. LOCK”
3. Témoin d’alerte de panne du moteur “”
4. Témoin d’alerte de la température du liquide de refroidissement “”
5. Témoin d’alerte de la direction assistée “EPS”
6. Témoin du frein de stationnement “P”7. Témoin de la marche arrière “R”
8. Témoin de point mort “N”9. Témoin de la gamme haute “H”
10. Témoin de la gamme basse “L”
11. Témoin de port de casque/ceinture de sécurité “/”
1. Indicador de la tracción On-Command “”/“”/“”/“”
2. Testigo de bloqueo del diferencial On-Command “DIFF. LOCK”
3. Luz de aviso de avería del motor “”
4. Luz de aviso de la temperatura del líquido refrigerante “”
5. Luz de aviso de la dirección asistida electromecánica “EPS”
6. Testigo del freno de estacionamiento “P”
7. Testigo de marcha atrás “R”8. Testigo de punto muerto “N”
9. Testigo de marcha larga “H”10. Testigo de marcha corta “L”
11. Testigo del casco/cinturón de seguridad “ / ”
12345
0A
9876
EVU00150
Indicator and warning lights
EVU01131
On-Command differential gear lock indicator
light “DIFF. LOCK”
This indicator light comes on with the On-Com-
mand drive indicator “” in the display when the
vehicle is in the “DIFF LOCK” drive mode.
When the On-Command drive knob is turned to
“DIFF LOCK”, the On-Command differential gear
lock indicator light flashes together with the drive
indicator “” until the front differential gear is
locked. (See pages 4-9–4-11, 4-39 and 6-17–
6-19.)
The electrical circuit of the indicator light can be
checked by turning the key to “” (on). If the indi-
cator light does not come on initially when the key
is turned to “” (on), or if the indicator light re-
mains on, have a Yamaha dealer check the electri-
cal circuit.
EE.book Page 5 Monday, January 19, 2009 5:30 PM

4-15
1. On-Command drive indicator “”/“”/“”/“”
2. On-Command differential gear lock indicator light “DIFF. LOCK”
3. Engine trouble warning light “”
4. Coolant temperature warning light “”
5. Electric Power Steering warning light “EPS”
6. Parking brake indicator light “P”7. Reverse indicator light “R”
8. Neutral indicator light “N”9. High-range indicator light “H”
10. Low-range indicator light “L”
11. Helmet/seat belt indicator light “ / ”
1. Indicateur de mode de conduite “”/“”/“”/“”
2. Témoin de blocage du différentiel “DIFF. LOCK”
3. Témoin d’alerte de panne du moteur “”
4. Témoin d’alerte de la température du liquide de refroidissement “”
5. Témoin d’alerte de la direction assistée “EPS”
6. Témoin du frein de stationnement “P”7. Témoin de la marche arrière “R”
8. Témoin de point mort “N”9. Témoin de la gamme haute “H”
10. Témoin de la gamme basse “L”
11. Témoin de port de casque/ceinture de sécurité “/”
1. Indicador de la tracción On-Command “”/“”/“”/“”
2. Testigo de bloqueo del diferencial On-Command “DIFF. LOCK”
3. Luz de aviso de avería del motor “”
4. Luz de aviso de la temperatura del líquido refrigerante “”
5. Luz de aviso de la dirección asistida electromecánica “EPS”
6. Testigo del freno de estacionamiento “P”
7. Testigo de marcha atrás “R”8. Testigo de punto muerto “N”
9. Testigo de marcha larga “H”10. Testigo de marcha corta “L”
11. Testigo del casco/cinturón de seguridad “ / ”
12345
0A
9876
5B410002
Coolant temperature warning light “”
If the coolant temperature reaches a specified lev-
el, this light comes on to warn that the coolant tem-
perature is too hot. If the light comes on during
operation, stop the engine as soon as it is safe to
do so and allow the engine to cool down for about
10 minutes. (See page 8-154.)
The electrical circuit of the warning light can be
checked by turning the key to “” (on). If the
warning light does not come on initially when the
key is turned to “” (on), or if the warning light re-
mains on, have a Yamaha dealer check the electri-
cal circuit.NOTICE

The engine may overheat if the vehicle is
overloaded. If this happens, reduce the
load to specification.


After restarting, make sure that the warn-
ing light is out. Continuous use while this
warning light is on may cause damage to
the engine.
EE.book Page 15 Monday, January 19, 2009 5:30 PM

4-17
1. On-Command drive indicator “”/“”/“”/“”
2. On-Command differential gear lock indicator light “DIFF. LOCK”
3. Engine trouble warning light “”
4. Coolant temperature warning light “”
5. Electric Power Steering warning light “EPS”
6. Parking brake indicator light “P”7. Reverse indicator light “R”
8. Neutral indicator light “N”9. High-range indicator light “H”
10. Low-range indicator light “L”
11. Helmet/seat belt indicator light “ / ”
1. Indicateur de mode de conduite “”/“”/“”/“”
2. Témoin de blocage du différentiel “DIFF. LOCK”
3. Témoin d’alerte de panne du moteur “”
4. Témoin d’alerte de la température du liquide de refroidissement “”
5. Témoin d’alerte de la direction assistée “EPS”
6. Témoin du frein de stationnement “P”7. Témoin de la marche arrière “R”
8. Témoin de point mort “N”9. Témoin de la gamme haute “H”
10. Témoin de la gamme basse “L”
11. Témoin de port de casque/ceinture de sécurité “/”
1. Indicador de la tracción On-Command “”/“”/“”/“”
2. Testigo de bloqueo del diferencial On-Command “DIFF. LOCK”
3. Luz de aviso de avería del motor “”
4. Luz de aviso de la temperatura del líquido refrigerante “”
5. Luz de aviso de la dirección asistida electromecánica “EPS”
6. Testigo del freno de estacionamiento “P”
7. Testigo de marcha atrás “R”8. Testigo de punto muerto “N”
9. Testigo de marcha larga “H”10. Testigo de marcha corta “L”
11. Testigo del casco/cinturón de seguridad “ / ”
12345
0A
9876
5B410003
Engine trouble warning light “”
This warning light comes on or flashes if a problem
is detected in the electrical circuit monitoring the
engine. When this occurs, have a Yamaha dealer
check the self-diagnosis system. (See page 4-35
for an explanation of the self-diagnosis device.)
The electrical circuit of the warning light can be
checked by turning the key to “” (on). If the
warning light does not come on initially when the
key is turned to “” (on), or if the warning light re-
mains on, have a Yamaha dealer check the electri-
cal circuit.
EE.book Page 17 Monday, January 19, 2009 5:30 PM

4-19
1. On-Command drive indicator “”/“”/“”/“”
2. On-Command differential gear lock indicator light “DIFF. LOCK”
3. Engine trouble warning light “”
4. Coolant temperature warning light “”
5. Electric Power Steering warning light “EPS”
6. Parking brake indicator light “P”7. Reverse indicator light “R”
8. Neutral indicator light “N”9. High-range indicator light “H”
10. Low-range indicator light “L”
11. Helmet/seat belt indicator light “ / ”
1. Indicateur de mode de conduite “”/“”/“”/“”
2. Témoin de blocage du différentiel “DIFF. LOCK”
3. Témoin d’alerte de panne du moteur “”
4. Témoin d’alerte de la température du liquide de refroidissement “”
5. Témoin d’alerte de la direction assistée “EPS”
6. Témoin du frein de stationnement “P”7. Témoin de la marche arrière “R”
8. Témoin de point mort “N”9. Témoin de la gamme haute “H”
10. Témoin de la gamme basse “L”
11. Témoin de port de casque/ceinture de sécurité “/”
1. Indicador de la tracción On-Command “”/“”/“”/“”
2. Testigo de bloqueo del diferencial On-Command “DIFF. LOCK”
3. Luz de aviso de avería del motor “”
4. Luz de aviso de la temperatura del líquido refrigerante “”
5. Luz de aviso de la dirección asistida electromecánica “EPS”
6. Testigo del freno de estacionamiento “P”
7. Testigo de marcha atrás “R”8. Testigo de punto muerto “N”
9. Testigo de marcha larga “H”10. Testigo de marcha corta “L”
11. Testigo del casco/cinturón de seguridad “ / ”
12345
0A
9876
Electric Power Steering warning light “EPS”
This warning light comes on if there is a problem in
the EPS. When this occurs, have a Yamaha dealer
check the EPS system. If the engine stalls and the
key is in the “” (on) position, the EPS warning
light comes on to indicate that the power assis-
tance for the steering is not functioning.
The electrical circuit of the warning light can be
checked by turning the key to “” (on). If the
warning light does not come on, have a Yamaha
dealer check the electrical circuit. If the warning
light comes on, and does not go off after starting
the engine, have a Yamaha dealer check the elec-
trical circuit.TIPIf the steering load is too heavy (i.e., excessive
steering use when the vehicle is traveling at a slow
speed), the power assist is reduced to protect the
EPS motor from overheating.
EE.book Page 19 Monday, January 19, 2009 5:30 PM

4-21 1. Helmet/seat belt indicator light “ / ”
1. Témoin de port de casque/ceinture de sécurité “/”
1. Testigo del casco/cinturón de seguridad “ / ”
1
Helmet/seat belt indicator light “ / ”
The indicator light comes on when the key is
turned to “” (on) to remind the occupants to al-
ways wear a helmet and to fasten their seat belt.
The indicator light stays on even when the seat
belt is properly latched.
If the indicator light does not come on when the
key is turned to “” (on), have a Yamaha dealer
check the electrical circuit.
EE.book Page 21 Monday, January 19, 2009 5:30 PM

4-25 1.“SELECT” button 2.“RESET” button
3. Odometer/Tripmeter 1/Tripmeter 2
1. Bouton “SELECT”2. Bouton “RESET”
3. Compteur kilométrique/totalisateur journalier 1/totalisateur
journalier 2
1. Botón “SELECT”2. Botón “RESET”
3. Cuentakilómetros/Cuentakilómetros parcial 1/
Cuentakilómetros parcial 2
12
3
Odometer and tripmeter modes
Pushing the “SELECT” button switches the display
between the odometer mode “ODO” and the trip-
meter modes “1” and “2” in the following order:
ODO → TRIP 1 → TRIP 2 → ODO
To reset a tripmeter, select it by pushing the “SE-
LECT” button, and then push the “RESET” button
for at least three seconds.
The tripmeters can be used to estimate the dis-
tance that can be traveled with a full tank of fuel.
This information enables you to plan future fuel
stops.TIPTo switch the display between “km/h” and “MPH”,
turn the key to “” (off), then push and hold the
“SELECT” button while turning the key to “”
(on).
EE.book Page 25 Monday, January 19, 2009 5:30 PM

6-7
5B410007
Starting the engine
1. Turn the key to “” (on).NOTICEThe On-Command differential gear lock indica-
tor light, coolant temperature warning light
and engine trouble warning light should come
on, then go off.
The EPS warning light should come on, then
go off when the engine is started.
If a warning or indicator light does not go off,
see pages 4-5 and 4-15–4-21 for the corre-
sponding warning and indicator light circuit
check.2. Apply the brake pedal.
3. Shift the drive select lever into the neutral po-
sition.

When the drive select lever is in the neutral
position, the neutral indicator light should
come on. If the neutral indicator light does not
come on, ask a Yamaha dealer to inspect the
electric circuit.
EE.book Page 7 Monday, January 19, 2009 5:30 PM