wheel torque YAMAHA RHINO 700 2010 Notices Demploi (in French)

5-27
EVU01230
Steering
Park on level ground. Turn the steering wheel right
and left. Check for excessive free play, abnormal
noises, or a rough feeling. Have a Yamaha dealer
repair as necessary for proper operation.
EVU00470
Fittings and fasteners
Always check the tightness of chassis fittings and
fasteners before a ride. Take the vehicle to a
Yamaha dealer or refer to the Service Manual for
correct tightening torque.
Instruments, lights and switches
Check that all instruments, lights and switches are
working properly. Correct if necessary.
Control cables
When riding in cold weather, always make sure all
control cables work smoothly before you begin
riding. WARNING! Control cables can freeze in
cold weather and you could be unable to con-
trol the vehicle.
EE.book Page 27 Monday, January 19, 2009 5:30 PM

8-109
EVU00940
Wheel installation
1. Install the wheel and the nuts.


The arrow mark on the tire must point
toward the rotating direction of the wheel.


Tapered nuts are used for both the front
and rear wheels. Install the nuts with their
tapered side towards the wheel.
2. Lower the vehicle so that the wheel is on the
ground.
3. Tighten the wheel nuts in a crisscross pattern
to the specified torque.
WARNING
Do not reverse the rims on the Rhino to widen
the track width. Installing wheels improperly
increases the risk of wheel failure and acci-
dents.
EE.book Page 109 Monday, January 19, 2009 5:30 PM

8-111 1. Arrow mark
1. Flèche
1. Flecha
1. Tapered nut
1.Écrou conique
1. Tuerca cónica
Wheel nut torque:
Front: 75 Nm (7.5 m·kgf, 54 ft·lbf)
Rear: 75 Nm (7.5 m·kgf, 54 ft·lbf)
EE.book Page 111 Monday, January 19, 2009 5:30 PM