warning YAMAHA RHINO 700 2010 Owner's Guide

5-17
Portable gas containers
If you carry a portable gas can in the bed of the
Rhino, be sure to secure it with the cap tightened
before driving the vehicle.
Always place a portable gas container on the
ground before filling it. Before removing the con-
tainer cap, touch the container with the gas dis-
penser nozzle. Keep gas dispenser nozzle in
contact with container inlet when filling.
WARNING! Never refill a fuel container in the
bed of any vehicle. Fire may result from a
build-up of static electricity. The discharge of
this build-up while refueling can cause a spark
and ignite the gasoline.
EE.book Page 17 Monday, January 19, 2009 5:30 PM

5-27
EVU01230
Steering
Park on level ground. Turn the steering wheel right
and left. Check for excessive free play, abnormal
noises, or a rough feeling. Have a Yamaha dealer
repair as necessary for proper operation.
EVU00470
Fittings and fasteners
Always check the tightness of chassis fittings and
fasteners before a ride. Take the vehicle to a
Yamaha dealer or refer to the Service Manual for
correct tightening torque.
Instruments, lights and switches
Check that all instruments, lights and switches are
working properly. Correct if necessary.
Control cables
When riding in cold weather, always make sure all
control cables work smoothly before you begin
riding. WARNING! Control cables can freeze in
cold weather and you could be unable to con-
trol the vehicle.
EE.book Page 27 Monday, January 19, 2009 5:30 PM

5-29
EVU00500
Tires
Check tire pressure regularly to make sure it is at
the recommended specifications. Also check for
wear and damage.
EVU00510
Tire pressure
Use the tire pressure gauge to check and adjust
tire pressures when the tires are cold. Tire pres-
sures must be equal on both sides. WARNING!
Operation of this vehicle with improper tire
pressure may cause severe injury or death
from loss of control or rollover. Tire pressure
below the minimum specified could also cause
the tire to dislodge from the rim under severe
riding conditions.
EE.book Page 29 Monday, January 19, 2009 5:30 PM

6-1
EVU00530
1-OPERATION
Read the Owner’s Manual carefully to become fa-
miliar with all controls. If there is a control or func-
tion you do not understand, ask your Yamaha
dealer.
WARNING
Failure to familiarize yourself with the controls
can lead to loss of control, which could cause
an accident or injury.
EE.book Page 1 Monday, January 19, 2009 5:30 PM

6-7
5B410007
Starting the engine
1. Turn the key to “” (on).NOTICEThe On-Command differential gear lock indica-
tor light, coolant temperature warning light
and engine trouble warning light should come
on, then go off.
The EPS warning light should come on, then
go off when the engine is started.
If a warning or indicator light does not go off,
see pages 4-5 and 4-15–4-21 for the corre-
sponding warning and indicator light circuit
check.2. Apply the brake pedal.
3. Shift the drive select lever into the neutral po-
sition.

When the drive select lever is in the neutral
position, the neutral indicator light should
come on. If the neutral indicator light does not
come on, ask a Yamaha dealer to inspect the
electric circuit.
EE.book Page 7 Monday, January 19, 2009 5:30 PM

6-13 1. Drive select lever 2. L (Low-range)
3. H (High-range) 4. N (Neutral)
5. R (Reverse)
1. Sélecteur de marche 2. L (gamme basse)
3. H (gamme haute) 4. N (point mort)
5. R (marche arrière)
1. Palanca de selección de marcha
2. L (marcha corta) 3. H (marcha larga)
4. N (punto muerto) 5. R (marcha atrás)
1
2
5 4
3
Shifting: neutral to reverse
WARNING
Before you shift into reverse, make sure there
are no obstacles or people behind you. When it
is safe to proceed, go slowly. Hitting an obsta-
cle or person could result in serious injury or
death.1. Stop the vehicle, take your foot off the accel-
erator pedal, and check behind you.
2. Apply the brake pedal.
3. Shift from neutral to reverse or vice versa by
moving the drive select lever along the shift
guide.


When in reverse, the reverse indicator
light should be on. Due to the synchroniz-
ing mechanism in the engine, the light
may not come on until the vehicle starts
moving.


If the light does not come on, ask a
Yamaha dealer to inspect the reverse in-
dicator light electrical circuit.
EE.book Page 13 Monday, January 19, 2009 5:30 PM

6-29
Prepare your load or trailer
WARNING
Improper loading or towing can increase the
risk of loss of control, an overturn, or other ac-
cident:

Do not exceed the Maximum Loading Lim-
its for the vehicle (see page 6-33 and vehi-
cle labeling).


Keep weight in the cargo bed centered
side to side, and as low and as far forward
as possible. Top-heavy loads increase the
risk of overturn. Be sure cargo is secured –
a loose load could change handling unex-
pectedly or strike occupants.


Do not exceed the maximum tongue
weight.


Make sure the load does not interfere with
your control or ability to see where you are
going.


Tie down cargo in the trailer securely.
Make sure cargo in the trailer cannot move
around. A shifting load can cause an acci-
dent.
EE.book Page 29 Monday, January 19, 2009 5:30 PM

6-35
Operating when loaded with cargo or towing a
trailer
Drive more slowly than you would without a load.
The more weight you carry, the slower you should
go. Although conditions vary, it is good practice to
keep the vehicle in low gear whenever you are car-
rying heavier loads or when towing a trailer.
WARNING
Carrying loads or towing a trailer can increase
the risk of loss of control, an overturn, or other
accident. To reduce the risk of an accident:

Reduce speed, operate in low gear only,
and allow more room to stop. A heavier ve-
hicle takes longer to stop.


Avoid hills and rough terrain. Choose ter-
rain carefully. Use extreme caution when
towing or carrying a load on inclines.


Turn gradually and go slowly.
EE.book Page 35 Monday, January 19, 2009 5:30 PM

6-37
Pulling something other than a trailer
Yamaha recommends that loads be transported in
the bed or in a trailer. If you need to move an ob-
ject a short distance use a winch and follow the
winch manufacturer’s instructions.
If you choose to use something other than a winch
use extreme caution, follow the manufacturer’s in-
structions for that product, and only attach to the
hitch or hitch bracket of the Rhino. WARNING! Im-
properly pulling can cause serious injury or
death. Never exceed the Pulling Load limit of
the Rhino. Avoid pulling on inclines.
Pulling objects on the ground can be more hazard-
ous than pulling a trailer. It may be difficult to pre-
dict how the load will affect vehicle operation. That
effect could also change depending upon terrain
or what obstacles might be in the object’s path.
EE.book Page 37 Monday, January 19, 2009 5:30 PM

7-1
5B410010
1-
BASIC GUIDE FOR SAFE
USE
As a Rhino owner you are responsible for the safe
and proper operation of this vehicle. Read this
chapter and review the safety instructions in Chap-
ter 2 before operating the vehicle. Use these chap-
ters and the labels on the vehicle to instruct new
operators and passengers. Do not allow anyone
else to operate the vehicle or ride as passengers if
you are unsure that he/she is willing and able to
follow these instructions.
WARNING
Follow these instructions to reduce your risk
of an accident and to reduce the risk of serious
injury or death in the event of an accident.
EE.book Page 1 Monday, January 19, 2009 5:30 PM