width YAMAHA RHINO 700 2013 Owners Manual

8-45
The tires listed below have been approved by
Yamaha Motor Manufacturing Corporation of America for this model.
EVU00940Wheel installation
1. Install the wheel and the nuts.
●
The arrow mark on the tire must
point toward the rotating direction of
the wheel.
●
Tapered nuts are used for both the
front and rear wheels. Install the nuts
with their tapered side towards the
wheel.
2. Lower the vehicle so that the wheel is on the ground.
3. Tighten the wheel nuts in crisscross pat-
tern to the specified torque.
WARNING
Do not reverse the rims on the Rhino to
widen the track width. Installing wheels
improperly increases the risk of wheel fail-
ure and accidents.
Manufacturer SizeType
Front MAXXIS 25 × 8-12NHS M951Y
Rear MAXXIS 25 × 10-12NHS M952Y
1RB7A_EE.book Page 45 Tuesday, April 24, 2012 9:07 AM

10-1
EBU25960
1-SPECIFICATIONS
Dimensions:Overall length:2885 mm (113.6 in)
Overall width: 1385 mm (54.5 in)
Overall height:
YXR7FD 1853 mm (73.0 in)
YXR7FSPD 1901 mm (74.8 in)
YXR700FAD 1853 mm (73.0 in)
Seat height: 818 mm (32.2 in)
Wheelbase:
1910 mm (75.2 in)
Ground clearance: 280 mm (11.0 in)
Minimum turning radius: 3900 mm (154 in)Weight:With oil and fuel:YXR7FD 540.0 kg (1190 lb)
YXR7FSPD 548.0 kg (1208 lb)
YXR700FAD 540.0 kg (1190 lb)Noise and vibration level:Noise level (77/311/EEC):YXR7FD 80.2 dB(A)
YXR7FSPD 80.2 dB(A)
Vibration on seat (EN1032, ISO5008): YXR7FD Will not exceed 0.5 m/s
2
YXR7FSPD Will not exceed 0.5 m/s2
Vibration on handlebar (EN1032, ISO5008): YXR7FD Will not exceed 2.5 m/s
2
YXR7FSPD Will not exceed 2.5 m/s2
Engine:Engine type: Liquid cooled 4-stroke, SOHC
Cylinder arrangement: Single cylinder
Displacement:
686 cm³
Bore × stroke:
102.0 × 84.0 mm (4.02 × 3.31 in)
Compression ratio: 9.20 : 1
Starting system:
Electric starter
Lubrication system: Wet sumpEngine oil:Recommended brand:
YAMALUBE
1RB7A_EE.book Page 1 Tuesday, April 24, 2012 9:07 AM