clock setting YAMAHA TT600RE 2004 Service Manual

ENGENGINE ASSEMBLY AND SETTING
5-61
7. Install:
•Dowel pins (1)
•O-Ring (2)
•Gasket (3) (cylinder head)
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
Cylinder head:
Screw (l), (2), (3) and (4): 29 Nm (2.9 mkg)
Nut (5) and (6): 22 Nm (2.2 mkg)
Screw (7): 10 Nm (1.0 mkg)
8. Install:
•Cylinder head
NOTE:
Tighten screws beginning with the one with the
lowest number.
9. Install:
•Chain stopper guide
•Camshaft
•Cam chain sprocket
Timing chain installation:
•Install the cam chain on the cylinder head as
illustrated (compression phase timing).
•Run the cam shaft in an anticlockwise direc-
tion until the mark on the crankcase (1) and
the point on the cam chain gearwheel (2) are
aligned.
ProCarManuals.com