battery capacity YAMAHA TTR50 2006 Betriebsanleitungen (in German)
[x] Cancel search | Manufacturer: YAMAHA, Model Year: 2006, Model line: TTR50, Model: YAMAHA TTR50 2006Pages: 390, PDF-Größe: 9.69 MB
Page 69 of 390
SPEC
2 - 14
EC212300
ELECTRICALItem Standard Limit
Ignition system: Advancer Digital ----
CDI: Magneto-model/manufacturer F1P6/MORIC ----
Pickup coil resistance (color) 248 ~ 372 Ω at 20 °C (68 °F)
(Red – White) ----
CDI unit model/manufacturer 1P6/SHY ----
Ignition coil: Model/manufacturer 4FP/SHY ----
Minimum spark gap 6 mm (0.24 in) ----
Primary winding resistance 0.32 ~ 0.48 Ω at 20 °C (68 °F) ----
Secondary winding resistance 5.68 ~ 8.52 k Ω at 20 °C (68 °F) ----
Spark plug cap: Type Resin ----
Resistance 10 k Ω at 20 °C (68 °F) ----
Charging system: System type AC magneto ----
Model/manufacturer F1P6/SHY ----
Normal output 14 V/80 W at 5,000 r/min ----
Charging coil resistance (color) 0.96 ~ 1.44 Ω at 20 °C (68 °F)
(White – Black) ----
Lighting coil resistance (color) 0.80 ~ 1.20 Ω at 20 °C (68 °F)
(Yellow – Black) ----
Rectifier/regulator: Regulator type Semiconductor short circuit ----
Model/manufacturer SH620B-12/SHINDENGEN ----
No-load regulated voltage (DC) 14.0 ~ 15.0 V ----
No-load regulated voltage (AC) 13.0 ~ 14.0 V ----
Rectifier capacity 8 A ----
Battery: Model YT4B-BS or GT4B-5 ----
Voltage capacity 12 V 2.3 Ah or 12 V 2.5 Ah ----
Electric starting system: Type Constant mesh ----
Starter motor: Model/manufacturer 1P6/SHY ----
Operation voltage 12 V ----
Output 0.25 kW ----
Armature coil resistance 0.035 ~ 0.043 Ω at 20 °C (68 °F) ----
Brush overall length 7 mm (0.28 in) 3.5 mm (0.14 in)
Brush quantity 2 pcs. ----
MAINTENANCE SPECIFICATIONS
Page 356 of 390
6 - 7
–+ELEC
EC624000
COUPLERS AND LEADS CONNECTION
INSPECTION
1. Check:
Couplers and leads connection
Rust/dust/looseness/short-circuit →
Repair or replace.
STARTER MOTOR OPERATION
1. Connect the positive battery terminal 1
and starter motor lead 2 with a jumper
lead 3.
Not operate → Repair or replace the
starter motor.
WARNING
A wire that is used as a jumper lead must
have at least the same capacity or more
as that of the a battery lead, otherwise the
jumper lead may burn.
This check is likely to produce sparks,
therefore make sure nothing flammable is
in the vicinity.
ELECTRIC STARTING SYSTEM