battery replacement YAMAHA TTR50 2006 Betriebsanleitungen (in German)

3 - 31
INSPADJ
FUSE INSPECTION
3. Check:
Continuity
2 Reserve fuse
Checking steps:

Remove the fuse 1
.
 Connect the pocket tester to the fuse and
check the continuity.
NOTE:
Set the pocket tester selector to “Ω × 1 ”.
Pocket tester:
YU-03112-C/90890-03112
 If the pocket tester indicates “∞ ”, replace
the fuse.
1 2
4. Replace:
Blown fuse
WARNING
Never use a fuse with an amperage rating
other than that specified. Improvising or
using a fuse with the wrong amperage rat-
ing may cause extensive damage to the
electrical system, cause the starting and
ignition systems to malfunction and could
possibly cause a fire.
5. Connect:
Battery lead coupler
(to the battery terminals)
6. Install: Battery cover
 Seat assembly
Replacement steps:

Set the main switch to “OFF ”.
 Install a new fuse of the correct amperage.
 Set on the switches to verify if the electri-
cal circuit is operational.
 If the fuse immediately blows again, check
the electrical circuit.
Items Amperage
rating Q
’ty
Main fuse 10 A 1