fuel pump YAMAHA TTR50 2006 Owners Manual

CHAPTER 4ENGINE
FRONT FENDER, SEAT ASSEMBLY
AND FUEL TANK .......................................4-1
MUFFLER ...................................................4-3
CARBURETOR ...........................................4-4
CYLINDER HEAD .....................................4-10
CAMSHAFT AND ROCKER ARMS .........4-15
VALVES AND VALVE SPRINGS .............4-18
CYLINDER AND PISTON .........................4-23
CLUTCH ....................................................4-29
SHIFT SHAFT ...........................................4-37
OIL PUMP .................................................4-39
AC MAGNETO AND
STARTER CLUTCH ..................................4-42
ENGINE REMOVAL ..................................4-47
CRANKCASE AND CRANKSHAFT .........4-51
SHIFT FORK, SHIFT CAM AND
TRANSMISSION .......................................4-54
CHAPTER 5
CHASSIS
FRONT WHEEL AND REAR WHEEL ........5-1
HANDLEBAR ............................................5-10
STEERING AND
FRONT SUSPENSION .............................5-13
SWINGARM ..............................................5-17
CHAPTER 6
ELECTRICAL
ELECTRICAL COMPONENTS AND
WIRING DIAGRAM .....................................6-1
IGNITION SYSTEM .....................................6-2
ELECTRIC STARTING SYSTEM ...............6-6
CHARGING SYSTEM ...............................6-14
CARBURETOR HEATING SYSTEM ........6-16
MAINTENANCE RECORD .......................6-20

SPEC
2 - 9
Carburetor:
I. D. mark 1P61 00 ----
Main jet (M.J) #62.5 ----
Main nozzle (N.J) E-2M ----
Main air jet (M.A.J) ø 1.4 ----
Jet needle (J.N) 4DL22-1 ----
Cutaway (C.A) 2.5 ----
Pilot outlet (P.O) ø 0.8 × 1.5 ----
Pilot jet (P.J) #12.5 ----
Valve seat size (V.S) ø 1.2 ----
Starter jet 1 (G.S.1) #20 ----
Starter jet 2 (G.S.2) ø 0.6 ----
Float height (F.H) 18.5 mm (0.73 in) ----
Fuel level (F.L) 2.0 ~ 3.0 mm (0.08 ~ 0.12 in) ----
Engine idle speed 1,600 ~ 1,800 r/min ----
Lubrication system: Oil filter type Wire mesh type ----
Oil pump type Trochoid type ----
Inner-rotor-to-outer-rotor-tip clearance 0.15 mm or less (0.0061 in or less)0.20 mm
(0.0079 in)
Outer-rotor-to-oil-pump-housing clearance 0.07 mm (0.0028 in)0.15 mm
(0.0059 in)
Oil-pump-housing-to-inner-rotor-and-outer-
rotor clearance 0.06 ~ 0.10 mm
(0.0024 ~ 0.0039 in)0.17 mm
(0.0067 in)
Item Standard Limit
MAINTENANCE SPECIFICATIONS