engine oil YAMAHA TW200 2002 User Guide

6-25
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
4
5
6
7
8
9
EAU00778
Brake and clutch lever
lubrication
Lubricate the pivoting parts.
EAU00785
Sidestand lubrication
Lubricate the sidestand pivoting
point and metal-to-metal contact
surfaces. Check that the sidestand
moves up and down smoothly.
EW000113
w
If the sidestand does not move
smoothly, consult a Yamaha deal-
er.
Recommended lubricant:
Same as engine oil
Recommended lubricant:
Same as engine oil
EAU00791
Rear suspension lubrication
Lubricate the pivoting parts.
Recommended lubricant:
Lithium soap base grease
5FY-9-E0 (TW200) 7/29/02 10:54 AM Page 54

6-26
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
4
5
6
7
8
9
EAU00793Front fork inspection
EW000115
w
Securely support the motorcycle
so there is no danger of it falling
over.
1. Visual check
Check for scratches or damage
on the inner tube and exces-
sive oil leakage from the front
fork.2. Operation check
Place the motorcycle on a level
place.
a. Hold the motorcycle in an
upright position and apply the
front brake.
b. Push down hard on the han-
dlebars several times and
check if the fork rebounds
smoothly.
EC000098
cC
If any damage or unsmooth move-
ment is found with the front fork,
consult a Yamaha dealer.
EAU00794Steering inspection
Periodically inspect the condition
of the steering. Worn out or loose
steering bearings may be danger-
ous. Place a stand under the
engine to raise the front wheel off
the ground. Hold the lower end of
the front forks and try to move
them forward and backward. If any
free play can be felt, ask a Yamaha
dealer to inspect and adjust the
steering. Inspection is easier if the
front wheel is removed.
5FY-9-E0 (TW200) 7/29/02 10:54 AM Page 55

7-2
CLEANING AND STORAGE
1
2
3
4
5
6
7
8
96. Rinse the motorcycle off
immediately with clean water
and dry all surfaces with a
chamois, clean towel, or soft
absorbent cloth.
7. Dry the chain and lubricate it
to prevent rust.
8. Clean the seat with a vinyl
upholstery cleaner to keep the
cover pliable and glossy.
9. Automotive-type wax may be
applied to all painted and
chrome-plated surfaces. Avoid
combination cleaner-waxes.
Many contain abrasives which
may mar the paint or protec-
tive finish. When finished, start
the engine and let it idle for
several minutes.
EAU01107B. STORAGE
Long term storage (60 days or
more) of your motorcycle will
require some preventive proce-
dures to guard against deteriora-
tion. After thoroughly cleaning the
motorcycle, prepare for storage as
follows:
1. Fill the fuel tank with fuel and
add fuel stabilizer (if available).
2. Remove the spark plug, pour
about one tablespoon of SAE
10W30 or 20W40 motor oil in
the spark plug hole and rein-
stall the spark plug. Turn the
engine over several times
(ground spark plug lead) to
coat the cylinder wall with oil.
EW000127
w
When using the starter motor to
crank the engine, remove the
spark plug wires, and ground them
to prevent sparking.
3. Thoroughly clean and lubricate
the drive chain. (For details,
see “Drive chain lubrication”
on page 6-23.)
4. Lubricate all control cables.
5. Block up the frame to raise
both wheels off the ground.
6. Tie a plastic bag over the
exhaust pipe outlet to prevent
moisture from entering.
7. If storing in a humid or salt-air
atmosphere, coat all exposed
metal surfaces with a light film
of oil. Do not apply oil to any
rubber parts or the seat cover.
8. Remove the battery and
charge it. Store it in a dry place
and recharge it once a month.
Do not store the battery in an
excessively warm or cold place
(less than 0°C or more than
30°C.
NOTE:
Make any necessary repairs before
storing the motorcycle.
5FY-9-E0 (TW200) 7/29/02 10:54 AM Page 66

8-1
EAU01038
SPECIFICATIONS
1
2
3
4
5
6
7
8
9
Specifications
Model TW200E
Dimensions:
Overall length 2,090 mm
Overall width 815 mm
Overall height 1,115 mm
Seat height 790 mm
Wheel base 1,325 mm
Ground clearance 250 mm
Minimum turning radius 1,900 mm
Basic weight (With oil and full
fuel tank):126 kg
Engine:
Engine type Air-cooled 4-stroke, SOHC,
gasoline
Cylinder arrangement Forward inclined
single cylinder
Displacement 196 cm
3
Bore ×Stroke 67.0 ×55.7 mm
Compression ratio 9.5:1
Starting system Electric and kick starter
Lubrication system Wet sumpEngine oil:
Type:
Classification API Service “SE”, “SF” type
or equivalent
(e.g. “SF-SE”, “SF-SE-CC”,
“SF-SE-SD” etc.)
Capacity:
Periodic oil change 1.0 L
With oil filter replacement 1.1 L
Total amount 1.3 L
Air filter:Wet type element
Fuel:
Type Regular gasoline
Fuel tank capacity 7.0 L
Reserve amount 1.7 L
Carburetor:
Type / quantity Y29P-5C / 1
Manufacturer TEIKEI
–10° 0° 10° 20° 30° 40°
SAE 10W/30
SAE 10W/40
SAE 20W/40
SAE 20W/50C
5FY-9-E0 (TW200) 7/29/02 10:54 AM Page 67