fuel cap release YAMAHA VERSITY 300 2004 Owners Manual

INSTRUMENT AND CONTROL FUNCTIONS
3
1
ZAUM0409
1. Fuel tank cap
EAU00176*
Fuel tank cap
To remove the fuel tank cap
1. Open the seat. (See page 3-12 for
seat opening and closing
procedures.)
2. Insert the key into the lock and
turn it 1/4 turn clockwise.
3. The lock will be released and the
fuel tank cap can be removed.To install the fuel tank cap
1. Insert the fuel tank cap into the
tank opening with the marks on
the cap and tank aligned.
2. Turn the key counterclockwise to
the original position, and then
remove it.
NOTE :
Do not forget to remove the key before
closing the seat.
3. Close the seat.
NOTE :
The fuel tank cap cannot be installed
unless the key is in the lock. In addi-
tion, the key cannot be removed if the
cap is not properly installed and locked.
EW000023
Make sure that the fuel tank cap is
properly closed and locked before
riding.
WARNING
1
2
ZAUM0020
1. Filler tube
2. Fuel level
EAU03753
Fuel
Make sure that there is sufficient fuel
in the tank. Fill the fuel tank to the
bottom of the filler tube as shown.
EW000130
•Do not overfill the fuel tank,
otherwise it may overflow when
the fuel warms up and expands.
•Avoid spilling fuel on the hot
engine.
WARNING
3-10