set clock YAMAHA VERSITY 300 2004 Owners Manual

INSTRUMENT AND CONTROL FUNCTIONS
3
"Mode""Mode"
"Mode"
"Mode"
12
3
4
ZAUM0391
1. Mode button
2. Digital display
3. Set button1. Total
2. Trip 1
3. Trip 2
4. Trip/Fuel
3-4
1
23ZAUM0581
EAUM1950
Multi-function display
The multi-function display is equipped
with the following:
•an odometer (which shows the
total distance traveled)
•two tripmeters (which show the
distance traveled since they were
last set to zero, the time passed
since the tripmeters were set to
zero, and the average speed
traveled during this time)
•a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning light came
on)
•a clock
•an ambient temperature display
•an oil change indicator (which
comes on when the engine oil
should be changed)
NOTE :
•For the UK, the distance traveled
is displayed in miles and the
temperature reading is displayed
in °F.
•For other countries, the distance
traveled is displayed in kilometers
and the temperature reading is
displayed in °C.Odometer and tripmeter modes
Pushing the "MODE" button switches
the display between the odometer
mode "Total" and the tripmeter modes
"Trip" in the following order:
Total ⇒ Trip 1 ⇒ Trip 2 ⇒Trip/fuel
⇒ Total

INSTRUMENT AND CONTROL FUNCTIONS
3ZAUM0394ZAUM0395
1
2
3
ZAUM0396
1. Frost warning indicator ""
2. Minus item
3. Temperature
3-6
Clock mode
To set the clock: 1. When the display is in the "Total" mode, push the "SET" button for
at least two seconds.
2. When the hour digits start flashing, push the "SET" button to
set the hours. 3. Push the "MODE" button, and the
minute digits will start flashing.
4. Push the "SET" button to set the minutes.
5. Push the "MODE" button and then
release it to start the clock. The
display will return to the "Total"
mode. Ambient temperature display
This display shows the ambient
temperature from -30
°C (-86 °F) to 50 °C
(122 °F).
The frost warning indicator "
"
automatically comes on if the
temperature is lower than 3 °C (37,4 °F).