rims YAMAHA VIKING 2016 Owners Manual

2-7
2
Aftermarket parts, accessories, and modifications
While you may find aftermarket products similar in design and quality to genuine Yamaha Acces-
sories, recognize that some aftermarket accessories or modifications are not suitable because
of potential safety hazards to yo u or others. Installing aftermarket products or having other mod-
ifications performed to your Viking that change any of the vehicle’s design or operation charac-
teristics can put you and others at greater risk of serious injury or death. You are responsible for
injuries related to changes in the vehicle.
Aftermarket tires and rims
The tires and rims that came with your Viking were designed to match the performance capabil-
ities and to provide the best combination of handli ng, braking, and comfort. Other tires, rims, siz-
es, and combinations may not be appropriate. Refe r to page 8-40 for tire specifications and more
information on replacing your tires.UB427AE0.book Page 7 Monday, May 18, 2015 9:17 AM

8-41
8
EBU33030Wheel installation1. Install the wheel and the nuts.TIPFor YXM70VPXG / YXM70VPHG: tapered
nuts are used for both the front and rear
wheels. Install the nuts with their tapered side
towards the wheel. YXM70VPXG / YXM70VPHG2. Lower the vehicle so that the wheel is on the ground. 3. Tighten the wheel nuts in a crisscross
pattern to the specified torque.
WARNING
EWB03400Do not reverse the rims on your Yamaha
Viking to widen the track width. Installing
wheels improperly increases the risk of
wheel failure and accidents. EBU32640BatteryThe battery is located under the hood. (See
page 8-10 for hood removal and installation
procedures.)
This model is equipped with a VRLA (Valve
Regulated Lead Acid) battery. There is no
need to check the electrolyte or to add dis-
1. Tapered nut
1
Tightening torques:Front wheel nut:75 Nm (7.5 m·kgf, 54 ft·lbf)
Rear wheel nut: 75 Nm (7.5 m·kgf, 54 ft·lbf)
UB427AE0.book Page 41 Monday, May 18, 2015 9:17 AM