brake pads YAMAHA WARRIOR 350 2001 Owners Manual

5-7
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-5.frame
EL
3. Brake fluid leakage
Check to see if any brake fluid is leaking
out of the pipe joints or master cylinders.
Apply the brakes firmly for one minute. If
there is any leaking, have the machine in-
spected by a Yamaha dealer.
4. Brake operation
Test the brakes at slow speed after start-
ing out to make sure they are working
properly. If the brakes do not provide
proper braking performance, inspect the
brake pads for wear. (See page 8-39.)
WARNING

Always check the brakes at the start of every
ride. Do not ride the ATV if you find any prob-
lem with the brakes or you could lose braking
ability, which could lead to an accident. If a
problem cannot be corrected by the adjust-
ment procedures provided in this manual,
have the ATV inspected by a Yamaha dealer.

8-39
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-8.frame
EL
1. Wear indicator a. Wear limit 1.0 mm
1. Indicateur d’usure a. Limite d’usure 1,0 mm
1. Indicador de desgaste a. Límite de desgaste 1,0 mmFront
Avant
Delantero
EBU00309
Front and rear brake pad inspection
Each brake pad is provided with a wear indica-
tor. The indicators allow checking of brake pad
wear without disassembling the brake. Apply
the brake and inspect the wear indicators. If
they are ALMOST in contact with the disc
plate, ask a Yamaha dealer to replace the pads.
1. Wear indicator a. Wear limit 1.0 mm
1. Indicateur d’usure a. Limite d’usure 1,0 mm
1. Indicador de desgaste a. Límite de desgaste 1,0 mmRear
Arrière
Trasero

8-49
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-8.frame
EL
a. 10 mm
EBU00338
Rear brake adjustmentNOTE:Adjust the rear brake before inspecting the rearbrake pads.
Pedal height adjustment
The top of the brake pedal should be posi-
tioned 10 mm below the top of the footrest. If
not, ask a Yamaha dealer to adjust it.
WARNING
Operating with improperly serviced or adjust-
ed brakes could cause loss of braking ability,
which could lead to an accident.
After servicing:l
Make sure the brakes operate smoothly
and that the free play is correct.
l
Make sure the brakes do not drag.
l
Make sure the brakes are not spongy. All
air must be bled from the brake system.
Replacement of brake components requires
professional knowledge. These procedures
should be performed by a Yamaha dealer.