parking brake YAMAHA WARRIOR 350 2001 Owners Manual

Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350TOC-E.frame
EL
EBU00015
CONTENTS
LOCATION OF THE WARNING AND
SPECIFICATION LABELS ....................... 1-1
SAFETY INFORMATION ........................ 2-1
DESCRIPTION AND MACHINE
IDENTIFICATION .................................... 3-1
Identification number records........... 3-3
Key identification number ................. 3-5
Vehicle identification number ........... 3-5
Model label ......................................... 3-7
CONTROL FUNCTIONS ......................... 4-1
Main switch ........................................ 4-1
Indicator lights.................................... 4-3
Handlebar switches............................ 4-5
Throttle lever ...................................... 4-9
Speed limiter .................................... 4-11
Clutch lever ....................................... 4-13
Front brake lever .............................. 4-13
Rear brake pedal .............................. 4-15
Parking brake .................................... 4-17
Shift pedal......................................... 4-21Drive select lever...............................4-21
Fuel tank cap .....................................4-23
Fuel cock ............................................4-23
Starter (choke) ...................................4-25
Seat ....................................................4-27
Front shock absorber adjustment....4-29
Rear shock absorber adjustment .....4-31
PRE-OPERATION CHECKS .....................5-1
Front and rear brakes .........................5-5
Fuel.......................................................5-9
Engine oil ...........................................5-13
Chain ..................................................5-15
Throttle lever .....................................5-17
Fittings and Fasteners ......................5-17
Lights .................................................5-17
Switches ............................................5-17
Battery................................................5-19
Tires ...................................................5-19
How to measure tire pressure .........5-23
Tire wear limit ...................................5-25
1234
5

ER
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350TOC-E.frame
OPERATION ........................................... 6-1
Starting a cold engine ....................... 6-3
Starting a warm engine ..................... 6-9
Warming up ........................................ 6-9
Drive select lever operation and
reverse driving ............................... 6-11
Shifting ............................................. 6-15
To start out and accelerate .............. 6-17
To decelerate .................................... 6-21
Engine break-in ................................ 6-23
Parking .............................................. 6-27
Parking on a slope ........................... 6-29
Accessories and loading ................. 6-31
RIDING YOUR ATV ................................ 7-1
Getting to know your ATV ................. 7-3
Ride with care and good
judgement ........................................ 7-5
Be careful where you ride ............... 7-27
Turning your ATV ............................ 7-39
Climbing uphill ................................. 7-45
Riding downhill ................................ 7-55
Crossing a slope ............................... 7-59
Crossing through shallow water .... 7-63
Riding over rough terrain ................ 7-67Sliding and skidding ........................ 7-69
What to do if ..................................... 7-73
What to do ........................................ 7-73
PERIODIC MAINTENANCE AND
ADJUSTMENT ....................................... 8-1
Owner’s manual and tool kit ............. 8-3
Periodic maintenance/lubrication ..... 8-7
Engine oil .......................................... 8-15
Spark plug inspection ...................... 8-25
Air filter cleaning.............................. 8-29
Carburetor adjustment .................... 8-33
Idle speed adjustment ..................... 8-35
Valve clearance adjustment ............ 8-37
Throttle lever adjustment ................ 8-37
Front and rear brake pad
inspection ....................................... 8-39
Inspecting the brake fluid level ....... 8-41
Brake fluid replacement .................. 8-45
Front brake lever free play
adjustment ..................................... 8-47
Rear brake adjustment .................... 8-49
Parking brake adjustment ............... 8-51
Clutch lever free play adjustment... 8-55
Drive chain slack check.................... 8-57
Drive chain slack adjustment .......... 8-59
67
8

3-1
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-3.frame
EL
EBU00032
DESCRIPTION AND MACHINE
IDENTIFICATION
1. Seat
2. Drive select lever
3. Fuel tank cap
4. Main switch
5. Brake pedal
6. Headlight
7. Front wheel
8. Fuel cock9. Rear wheel
10. Shift pedal
11. Starter (choke)
12. Clutch lever
13. Parking brake
14. Front brake lever
15. Throttle lever
16. Handlebar switch
NOTE:

The machine you have purchased may differ
slightly from those shown in the figures of this
manual.

4-17
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-4.frame
EL
EBU00081
Parking brake
Use the parking brake when you have to start
the engine or park the machine, especially on a
slope. Squeeze the clutch lever while pushing
the button, then push in the lock plate to apply
the parking brake. Squeeze the clutch lever to
release the parking brake.
NOTE:

When the parking brake is used, engine speed
is limited to 2,300 r/min. Be sure the parking
brake is released before moving the throttle le-
ver. Otherwise, the engine will misfire, pre-
venting normal operation.
1. Button 2. Lock plate
1. Bouton 2. Verrou
1. Botón 2. Placa de bloqueo
1. Lock position
1. Position bloquée
1. Posición de bloqueo

4-19
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-4.frame
EL
WARNING

l
Always set the parking brake before start-
ing the engine. The ATV could start mov-
ing unexpectedly if the parking brake is
not applied. This could cause loss of con-
trol or a collision.
l
Always be sure you have released the
parking brake before you begin to ride.
The brake could overheat if you ride the
ATV without releasing the parking brake.
You could lose braking performance
which could cause an accident. You could
also wear out the brakes prematurely.

5-1
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-5.frame
EL
EBU00113
PRE-OPERATION CHECKS
Before using this machine, check the following points:
ITEM ROUTINE PAGE
Brake
• Check operation, free play, fluid level and fluid leakage.
• Fill with DOT 4 (or DOT 3) brake fluid if necessary.5-5 ~ 5-7,
8-39 ~ 8-49
Clutch
• Check operation, condition and lever free play. 8-55
Parking brake
• Check operation, condition and cable slack. 8-51 ~ 8-53
Fuel
• Check fuel level.
• Fill with fuel if necessary.5-9 ~ 5-11
Engine oil
• Check oil level.
• Fill with oil if necessary.5-13 ~ 5-15,
8-15 ~ 8-23
Drive chain
• Check chain slack and condition.
• Adjust if necessary.5-15, 8-57 ~ 8-61
Throttle
• Check for proper throttle cable operation. 5-17, 8-37
Wheels and tires
• Check tire pressure, wear and damage.5-19 ~ 5-25,
8-69 ~ 8-71
Fittings and Fasteners
• Check all fittings and fasteners. 5-17
Lights
• Check for proper operation. 5-17, 8-83 ~ 8-89
Battery
• Check fluid level.
• Fill with distilled water if necessary.5-19, 8-73 ~ 8-79

6-3
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-6.frame
EL
EBU00514
Starting a cold engine
WARNING

Always make sure all control cables work
smoothly before you begin riding in cold
weather. If the control cables are frozen or do
not work smoothly, you could be unable to
control the ATV, which could lead to an acci-
dent or collision.
1. Set the parking brake.
2. Turn the fuel cock to “ON”.
3. Turn the main switch to “ON” and the en-
gine stop switch to “RUN”.
4. Shift the transmission into neutral.

6-9
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-6.frame
EL
EBU00180
Starting a warm engine
To start a warm engine, refer to the “Starting a
cold engine” section. The starter (choke)
should not be used. The throttle should be
opened slightly.
EBU00538
Warming up
To get maximum engine life, always warm up
the engine before starting off. Never accelerate
hard with a cold engine! To see whether or not
the engine is warm, check if it responds to the
throttle normally with the starter (choke)
turned off.NOTE:

When the parking brake is used, engine speed
is limited to 2,300 r/min. Be sure the parking
brake is released before moving the throttle le-
ver. Otherwise, the engine will misfire, pre-
venting normal operation.

6-27
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-6.frame
EL
EBU00211
Parking
When parking, stop the engine and shift into
neutral. Turn the fuel cock to “OFF” and apply
the parking brake.
1. Button 2. Lock plate
1. Bouton 2. Verrou
1. Botón 2. Placa de bloqueo1. Lock position
1. Position de verrouillage
1. Posición de bloqueo

6-29
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B067_YFM350X-60:YFM350-6.frame
EL
EBU00214
Parking on a slope
WARNING
Avoid parking on hills or other inclines. Park-
ing on a hill or other incline could cause the
ATV to roll out of control, increasing the
chance of an accident. If you must park on an
incline, put the machine in low gear, apply the
parking brake, and block the front and rear
wheels with rocks or other objects.
Do not park the ATV at all on hills that are sosteep you could not walk up them easily.
1. Bring the machine to a stop by applying
the brakes in low gear.
2. Stop the engine and release the clutch le-
ver.
3. With the front and rear brakes applied, ap-
ply the parking brake and slowly release
the rear brake pedal.