wheel torque YAMAHA WOLVERINE 350 2004 Manuale de Empleo (in Spanish)
[x] Cancel search | Manufacturer: YAMAHA, Model Year: 2004, Model line: WOLVERINE 350, Model: YAMAHA WOLVERINE 350 2004Pages: 384, tamaño PDF: 16.02 MB
Page 328 of 384
8-83 1. Tapered nut
1.Écrou conique
1. Tuerca cónica
1. Arrow mark
1. Flèche
1. Marca en forma
EBU01121
Wheel installation
1. Install the wheel and the nuts.NOTE:_
Tapered nuts are used for both the front and
rear wheels. Install the nut with its tapered
side towards the wheel.
The arrow mark on the tire must point to-
ward the rotating direction of the wheel.
_2. Lower the ATV so that the wheel is on the
ground.
3. Tighten the wheel nuts to the specified
torque.
Wheel nut torque:
Front: 55 Nm (5.5 m·kgf)
Rear: 55 Nm (5.5 m·kgf)
U5WH60.book Page 83 Friday, October 31, 2003 2:45 PM