radiator YAMAHA WR 250F 2002 Owners Manual
[x] Cancel search | Manufacturer: YAMAHA, Model Year: 2002, Model line: WR 250F, Model: YAMAHA WR 250F 2002Pages: 694, PDF Size: 40.57 MB
Page 22 of 694
CHAPTER 4
ENGINE
SEAT, FUEL TANK
AND SIDE COVERS
................................. 4-1
EXHAUST PIPE AND SILENCER
............ 4-2
RADIATOR
................................................ 4-4
CARBURETOR
......................................... 4-7
CAMSHAFTS
.......................................... 4-21
CYLINDER HEAD
................................... 4-30
VALVES AND VALVE SPRINGS
........... 4-34
CYLINDER AND PISTON
....................... 4-43
CLUTCH
.................................................. 4-50
OIL FILTER ELEMENT, WATER PUMP
AND RIGHT CRANKCASE COVER
...... 4-57
BALANCER
............................................ 4-64
OIL PUMP
............................................... 4-67
KICK SHAFT AND SHIFT SHAFT
.......... 4-72
CDI MAGNETO
....................................... 4-79
ENGINE REMOVAL
................................ 4-83
CRANKCASE AND CRANKSHAFT
....... 4-88
TRANSMISSION, SHIFT CAM
AND SHIFT FORK
.................................. 4-97
CHAPTER 5
CHASSIS
FRONT WHEEL AND REAR WHEEL
...... 5-1
FRONT BRAKE AND REAR BRAKE
..... 5-11
FRONT FORK
......................................... 5-28
HANDLEBAR
.......................................... 5-41
STEERING
.............................................. 5-47
SWINGARM
............................................ 5-53
REAR SHOCK ABSORBER
................... 5-60
Page 23 of 694
KAPITEL 4
MOTOR
SITZBANK,
KRAFTSTOFFTANK UND
SEITENABDECKUNGEN
........... 4-1
KRÜMMER UND
SCHALLDÄMPFER
.................... 4-2
KÜHLER
..................................... 4-4
VERGASER
................................ 4-7
NOCKENWELLE
...................... 4-21
ZYLINDERKOPF
...................... 4-30
VENTILE UND
VENTILFEDERN
...................... 4-34
ZYLINDER UND KOLBEN
....... 4-43
KUPPLUNG
.............................. 4-50
ÖLFILTEREINSATZ,
WASSERPUMPE UND
RECHTE KURBELWELLENAB-
DECKUNG
................................ 4-57
AUSGLEICHSWELLE
.............. 4-64
ÖLPUMPE
................................ 4-67
KICKSTARTER UND
KICKSTARTERWELLE
............ 4-72
CDI-SCHWUNGRADMAGNETZÜN-
DER
.......................................... 4-79
MOTOR DEMONTIEREN
......... 4-83
KURBELGEHÄUSE UND
KURBELWELLE
...................... 4-88
GETRIEBE, SCHALTWALZE
UND SCHALTGABELN
........... 4-97
KAPITEL 5
FAHRWERK
VORDER- UND HINTERRAD
.... 5-1
VORDER- UND
HINTERRADBREMSE
............. 5-11
TELESKOPGABEL
.................. 5-28
LENKER
................................... 5-41
LKKOPF
................................... 5-47
SCHWINGE
.............................. 5-53
FEDERBEIN
............................. 5-60
CHAPITRE 4
MOTEUR
SELLE, RESERVOIR
DE CARBURANT ET
CACHES LATERAUX
.................. 4-1
TUYAU D’ECHAPPEMENT
ET SILENCIEUX
........................... 4-2
RADIATEUR
.................................. 4-4
CARBURATEUR
........................... 4-7
ARBRES A CAMES
..................... 4-21
CULASSE
...................................... 4-30
SOUPAPES ET RESSORTS
DE SOUPAPE
............................... 4-34
CYLINDRE ET PISTON
............. 4-43
EMBRAYAGE
.............................. 4-50
ELEMENT DE FILTRE A
HUILE, POMPE A EAU ET
DEMI-CARTER DROIT
............. 4-57
BALANCIER
................................ 4-64
POMPE A HUILE
........................ 4-67
ARBRE DE KICK ET ARBRE
DE SELECTEUR
.......................... 4-72
VOLANT MAGNETIQUE
CDI
................................................. 4-79
DEPOSE DU MOTEUR
............... 4-83
CARTER ET VILEBREQUIN
.... 4-88
BOITE A VITESSES,
TAMBOUR ET FOURCHETTES
DE SELECTION
.......................... 4-97
CHAPITRE 5
PARTIE CYCLE
ROUE AVANT ET ROUE
ARRIERE
........................................ 5-1
FREIN AVANT ET FREIN
ARRIERE
...................................... 5-11
FOURCHE AVANT
..................... 5-28
GUIDON
........................................ 5-41
DIRECTION
................................. 5-47
BRAS OSCILLANT
..................... 5-53
AMORTISSEUR ARRIERE
....... 5-60
CAPITOLO 4
MOTORE
SELLA, SERBATOIO CARBURAN-
TE E CARENATURA
LATERALE
.....................................4-1
TUBO DI SCARICO E
SILENZIATORE
............................4-2
RADIATORE
..................................4-4
CARBURATORE
...........................4-7
ALBERI A CAMME
....................4-21
TESTATA DEL CILINDRO
.......4-30
VALVOLE E MOLLE
VALVOLE
.....................................4-34
CILINDRO E PISTONE
..............4-43
FRIZIONE .....................................4-50
ELEMENTO FILTRANTE
DELL’OLIO, POMPA DELL’AC-
QUA E COPERCHIO CARTER
DESTRO ........................................4-57
BILANCIERE ...............................4-64
POMPA DELL’OLIO ..................4-67
ALBERO PEDALE E ALBERO
DEL CAMBIO ...............................4-72
MAGNETE CDI ............................4-79
RIMOZIONE DEL MOTORE ....4-83
CARTER E ALBERO
MOTORE ......................................4-88
TRASMISSIONE, CAMMA DEL
CAMBIO E FORCELLA DEL
CAMBIO ........................................4-97
CAPITOLO 5
PARTE CICLISTICA
RUOTA ANTERIORE E RUOTA
POSTERIORE ................................5-1
FRENO ANTERIORE E
POSTERIORE ..............................5-11
FORCELLA ANTERIORE .........5-28
MANUBRIO ..................................5-41
STERZO ........................................5-47
FORCELLONE
OSCILLANTE ..............................5-53
AMMORTIZZATORE
POSTERIORE ..............................5-60
Page 26 of 694
GEN
INFO
1 - 1
DESCRIPTION
EC100000
GENERAL INFORMATION
EC110000
DESCRIPTION
1
Clutch lever
2
Decompression lever
3
Trip meter
4
Light switch
5
Front brake lever
6
Throttle grip
7
Radiator cap
8
Fuel tank cap
9
Oil tank cap
0
Engine stop switch
A
Taillight
B
Kickstarter crank
C
Fuel tank
D
Headlight
E
Radiator
F
Coolant drain bolt
G
Rear brake pedal
H
Valve joint
I
Fuel cock
J
Cold starter knob
K
Hot starter knob (red)
L
Drive chain
M
Air filter
N
Shift pedal
O
Front fork
NOTE:
The machine you have purchased may differ
slightly from those shown in the following.
Designs and specifications are subject to
change without notice.
Page 27 of 694
GEN
INFO
DESCRIPTION
FAHRZEUGBESCHREIBUNG
DESCRIZIONE
ALLGEMEINE
ANGABEN
FAHRZEUGBESCHREI-
BUNG
1
Kupplungshebel
2
Dekompressionshebel
3
Tageskilometerzähler
4
Lichtschalter
5
Handbremshebel
6
Gasdrehgriff
7
Kühlerverschlußdeckel
8
Kraftstoffankverschluß
9
Öltankdeckel
0
Motorstoppschalter
A
Rücklicht
B
Kickstarterhebel
C
Kraftstofftank
D
Scheinwerfer
E
Kühler
F
Kühlmittel-Ablaßschraube
G
Fußbremshebel
H
Auslaufschutzventil
I
Kraftstoffhahn
J
Kaltstarterknopf
K
Heißstarterknopf (rot)
L
Antriebskette
M
Luftfilter
N
Schalthebel
O
Teleskopgabel
HINWEIS:
Leichte Modell-Abweichungen
möglich.
Änderungen an Design und techni-
schen Daten jederzeit vorbehalten.
RENSEIGNEMENTS
GENERAUX
DESCRIPTION
1
Levier d’embrayage
2
Levier de décompression
3
Compteur de vitesse
4
Contacteur d’éclairage
5
Levier de frein avant
6
Poignée des gaz
7
Bouchon de radiateur
8
Bouchon de réservoir de carburant
9
Bouchon du réservoir d’huile
0
Coupe-circuit du moteur
A
Lampe arrière
B
Kick
C
Réservoir de carburant
D
Phare
E
Radiateur
F
Boulon de vidange du liquide de
refroidissement
G
Pédale de frein arrière
H
Joint de robinet
I
Robinet de carburant
J
Bouton de démarrage à froid
K
Bouton de démarrage à chaud
(rouge)
L
Chaîne de transmission
M
Filtre à air
N
Sélecteur
OFourche avant
N.B.:
Votre machine diffère peut-être par-
tiellement de celle montrée sur ces
photos.
La conception et les caractéristiques
peuvent êtres changées sans préavis.
1 - 1
INFORMAZIONI
GENERALI
DESCRIZIONE
1Leva della frizione
2Leva della decompressione
3Contachilometri parziale
4Interruttore luci
5Leva del freno anteriore
6Manopola dell’acceleratore
7Tappo del radiatore
8Tappo del serbatoio del carburante
9Tappo del serbatoio dell’olio
0Interruttore di arresto motore
AFanalino posteriore
BPedivella di avviamento
CSerbatoio del carburante
DFaro
ERadiatore
FBullone di scarico del refrigerante
GPedale del freno posteriore
HGiunto a valvola
IRubinetto del carburante
JManopola di avviamento a freddo
KManopola di avviamento a caldo
(rossa)
LCatena di trasmissione
MFiltro aria
NPedale del cambio
OForcella anteriore
NOTA:
Il veicolo acquistato potrebbe differire
leggermente da quelli illustrati qui di
seguito.
I modelli e le specifiche sono soggetti
a variazioni senza preavviso.
1
Page 38 of 694
GEN
INFO
1 - 7
SPECIAL TOOLS
SPECIAL TOOLS
The proper special tools are necessary for complete and accurate tune-up and assembly. Using the
correct special tool will help prevent damage caused by the use of improper tools or improvised
techniques. The shape and part number used for the special tool differ by country, so two types are
provided. Refer to the list provided to avoid errors when placing an order.
NOTE:
For U.S.A. and Canada, use part number starting with “YM-”, “YU-” or “ACC-”.
For others, use part number starting with “90890-”.
Part number Tool name/How to use Illustration
YU-1135-A, 90890-01135 Crankcase separating tool
These tool is used to remove the crankshaft from
either case.YU-1135-A 90890-01135
YU-1235, 90890-01235 Rotor holding tool
This tool is used when loosening or tightening the fly-
wheel magneto securing nut.YU-1235 90890-01235
YU-3097, 90890-01252
YU-1256Dial gauge and stand
Stand
These tools are used to check each part for runout or
bent.YU-3097
YU-125690890-01252
YU-90050, 90890-01274
YU-90050, 90890-01275
YU-91044, 90890-04081
YM-1277, 90890-01277Crankshaft installing tool
Crankshaft installing pot
Crankshaft installing bolt
Spacer (crankshaft installer)
Adapter (M10)
These tools are used to install the crankshaft.YU-90050
YM-1277
YU-9104490890-01274
90890-01275
90890-01277
90890-04081
YU-1304, 90890-01304 Piston pin puller set
This tool is used to remove the piston pin.YU-1304 90890-01304
YU-24460-01, 90890-01325
YU-33984, 90890-01352Radiator cap tester
Radiator cap tester adapter
These tools are used for checking the cooling sys-
tem.YU-24460-01
YU-3398490890-01325
90890-01352
YU-33270-B, 90890-01362Flywheel puller
This tool is used to remove the flywheel magneto.YM-33270-B 90890-01362
Page 47 of 694
GEN
INFO
UTENSILI SPECIALI
UTENSILI SPECIALI
Sono necessari idonei utensili speciali per una messa a punto e un assemblaggio completi e accurati.
L’impiego dell’attrezzo speciale adatto aiuterà a prevenire eventuali danni causati dall’impiego di utensili non
idonei o di tecniche improvvisate. La forma e il numero di pezzo utilizzato per l’attrezzo speciale differiscono
da paese a paese, pertanto ne vengono indicati due tipi. Fare riferimento all’elenco fornito onde evitare errori
quando si effettua un’ordinazione.
NOTA:
Per U.S.A. e Canada, utilizzare il numero di pezzo che comincia con “YM-” , “YU-” o “ACC-”.
Per gli altri, utilizzare il numero di pezzo che comincia con “90890-”.
Numero di pezzo Nome dell’attrezzo/Come utilizzarlo Figura
YU-1135-A, 90890-01135 Utensile per la separazione del carter
Questo attrezzo è utilizzato per disaccoppiare i due
semicarter.YU-1135-A 90890-01135
YU-1235, 90890-01235 Utensile di sostegno per il rotore
Questo attrezzo viene utilizzato quando si svita o si avvita
la vite di fissaggio del magnete del volano.YU-1235 90890-01235
YU-3097, 90890-01252
YU-1256Comparatore e supporto
Supporto
Questi strumenti sono usati per controllare ciascuna parte
per usura o deviazioni.YU-3097
YU-125690890-01252
YU-90050, 90890-01274
YU-90050, 90890-01275
YU-91044, 90890-04081
YM-1277, 90890-01277Utensile per il montaggio dell’albero motore
Contenitore per il montaggio dell’albero motore
Bullone per il montaggio dell’albero motore
Distanziatore (dispositivo di installazione dell’albero motore)
Adattatore (M10)
Questi utensili sono utilizzati per installare l’albero motore.YU-90050
YM-1277
YU-9104490890-01274
90890-01275
90890-01277
90890-04081
YU-1304, 90890-01304 Kit estrattore dello spinotto pistone
Questo attrezzo è utilizzato per rimuovere gli spinotti.YU-1304 90890-01304
YU-24460-01, 90890-01325
YU-33984, 90890-01352Tester del tappo radiatore
Adattatore del tester tappo radiatore
Questi utensili sono utilizzati per il controllo del sistema di
raffreddamento.YU-24460-01
YU-3398490890-01325
90890-01352
YU-33270-B, 90890-01362Estrattore del volano
Questo attrezzo viene utilizzato per estrarre il magnete-
volano.YM-33270-B 90890-01362
1 - 7
Page 84 of 694
SPEC
2 - 9
MAINTENANCE SPECIFICATIONS
Lubrication system:
Oil filter type Wire mesh type ----
Oil pump type Trochoid type ----
Tip clearance 0.12 mm or less
(0.0047 in or less)0.20 mm
(0.008 in)
Side clearance 0.09 ~ 0.17 mm
(0.0035 ~ 0.0067 in)0.24 mm
(0.009 in)
Housing and rotor clearance 0.03 ~ 0.10 mm
(0.0012 ~ 0.0039 in)0.17 mm
(0.0067 in)
Cooling:
Radiator core size
Width 117.8 mm (4.6 in) ----
Height 220 mm (8.7 in) ----
Thickness 32 mm (1.26 in) ----
Radiator cap opening pressure110 kPa (1.1 kg/cm
2
, 15.6 psi)----
Radiator capacity (total) 0.6 L (0.53 lmp qt, 0.63 US qt) ----
Water pump
Type Single-suction centrifugal pump ----Item Standard Limit
Page 85 of 694
SPEC
2 - 10
MAINTENANCE SPECIFICATIONS
Part to be tightened Thread size Q’tyTightening torque
Nm m·kg ft·lb
Spark plug M10S
×
1.0 1 13 1.3 9.4
Camshaft cap M6
×
1.0 10 10 1.0 7.2
Cylinder head blind plug screw M12
×
1.0 1 37 3.7 27
Cylinder head (stud bolt) M6
×
1.0 2 7 0.7 5.1
(stud bolt) M8
×
1.25 1 15 1.5 11
(bolt) M9
×
1.25 4 38 3.8 27
(nut) M6
×
1.0 2 10 1.0 7.2
Cylinder head cover M6
×
1.0 2 10 1.0 7.2
Oil pressure check bolt M6
×
1.0 1 10 1.0 7.2
Cylinder M6
×
1.0 1 10 1.0 7.2
Balancer weight M6
×
1.0 2 10 1.0 7.2
Balancer shaft driven gear M14
×
1.0 1 50 5.0 36
Timing chain guide (intake side) M6
×
1.0 2 10 1.0 7.2
Decompression shaft M6
×
1.0 1 7 0.7 5.1
Decompression cable guide M6
×
1.0 1 10 1.0 7.2
Timing chain tensioner M6
×
1.0 2 10 1.0 7.2
Timing chain tensioner cap bolt M6
×
1.0 1 7 0.7 5.1
Impeller M8
×
1.25 1 14 1.4 10
Radiator hose clamp M6
×
1.0 8 2 0.2 1.4
Coolant drain bolt M6
×
1.0 1 10 1.0 7.2
Water pump housing M6
×
1.0 4 10 1.0 7.2
Radiator M6
×
1.0 6 10 1.0 7.2
Radiator guard M6
×
1.0 2 10 1.0 7.2
Radiator pipe M6
×
1.0 1 10 1.0 7.2
Oil pump cover M4
×
0.7 1 3 0.3 2.2
Oil pump M6
×
1.0 3 10 1.0 7.2
Oil filter element drain bolt M6
×
1.0 1 10 1.0 7.2
Oil filter element cover M6
×
1.0 2 10 1.0 7.2
Oil strainer M6
×
1.0 2 10 1.0 7.2
Oil delivery pipe 1 (M10) M10
×
1.25 1 20 2.0 14
(M8) M8
×
1.25 2 18 1.8 13
Oil delivery pipe 2 M6
×
1.0 1 10 1.0 7.2
Oil hose M6 × 1.0 3 10 1.0 7.2
Oil hose clamp—2 2 0.2 1.4
Oil strainer and frame M18 × 1.5 1 90 9.0 65
Carburetor joint clamp M4 × 0.7 2 3 0.3 2.2
Air filter joint clamp M6 × 1.0 1 3 0.3 2.2
Throttle cable cover M5 × 0.8 1 4 0.4 2.9
Air filter joint M5 × 0.8 2 5 0.5 3.6
Air filter joint and air filter case M5 × 0.8 5 1 0.1 0.7
Air filter element M6 × 1.0 1 2 0.2 1.4
Air filter case cover M6 × 1.0 4 4 0.4 2.9
Exhaust pipe (nut) M8 × 1.25 1 13 1.3 9.4
(bolt) M8 × 1.25 1 24 2.4 17
Exhaust pipe protector M6 × 1.0 3 10 1.0 7.2
Page 90 of 694
SPEC
2 - 15
MAINTENANCE SPECIFICATIONS
Part to be tightened Thread size Q’tyTightening torque
Nm m·kg ft·lb
Rear brake disc M6 × 1.0 6 14 1.4 10
Brake pedal M8 × 1.25 1 26 2.6 19
Rear brake master cylinder M6 × 1.0 2 10 1.0 7.2
Rear brake reservoir tank M6 × 1.0 1 10 1.0 7.2
Rear brake reservoir tank cap M4 × 0.7 2 2 0.2 1.4
Rear brake hose union bolt M10 × 1.25 2 30 3.0 2.2
Rear wheel axle and axle nut M20 × 1.5 1 125 12.5 90
Nipple (spoke)—72 3 0.3 2.2
Rear wheel sprocket M8 × 1.25 6 42 4.2 30
Rear brake disc cover M6 × 1.0 2 7 0.7 5.1
Rear brake caliper protector M6 × 1.0 2 7 0.7 5.1
Engine mounting:
Engine and engine bracket (front) M10 × 1.25 1 69 6.9 50
Engine and frame (lower) M10 × 1.25 1 69 6.9 50
Engine bracket and frame M8 × 1.25 6 34 3.4 24
Engine and engine bracket (upper) M10 × 1.25 1 55 5.5 40
Lower engine guard M6 × 1.0 3 10 1.0 7.2
Left engine guard M8 × 1.25 2 23 2.3 17
Right engine guard M8 × 1.25 2 10 1.0 7.2
Pivot shaft and nut M16 × 1.5 1 85 8.5 61
Relay arm and swingarm M14 × 1.5 1 80 8.0 58
Relay arm and connecting rod M14 × 1.5 1 80 8.0 58
Connecting rod and frame M14 × 1.5 1 80 8.0 58
Rear shock absorber and frame M10 × 1.25 1 56 5.6 40
Rear shock absorber and relay arm M10 × 1.25 1 53 5.3 38
Rear frame M8 × 1.25 3 29 2.9 21
Swingarm and brake hose holder M5 × 0.8 4 1 0.1 0.7
Swingarm and patch M4 × 0.7 4 2 0.2 1.4
Upper drive chain tensioner M8 × 1.25 1 19 1.9 13
Lower drive chain tensioner M8 × 1.25 1 20 2.0 14
Drive chain case M6 × 1.0 3 7 0.7 5.1
Seal guard and swingarm M5 × 0.8 4 6 0.6 4.3
Fuel tank M6 × 1.0 2 10 1.0 7.2
Fuel cock M6 × 1.0 2 7 0.7 5.1
Seat set bracket and fuel tank M6 × 1.0 1 7 0.7 5.1
Hooking screw (fitting band) and fuel tank M6 × 1.0 1 7 0.7 5.1
Radiator cover M6 × 1.0 6 4 0.4 2.9
Front fender M6 × 1.0 4 7 0.7 5.1
Rear fender and air filter case M6 × 1.0 2 7 0.7 5.1
Rear fender and frame (right) M6 × 1.0 1 10 1.0 7.2
Side cover M6 × 1.0 2 7 0.7 5.1
Seat M8 × 1.25 2 23 2.3 17
Page 138 of 694
SPEC
2 - 9
SPECIFICHE DI MANUTENZIONE
Sistema di lubrificazione:
Tipo di filtro Tipo a maglia metallica ----
Tipo di pompa dell’olio Tipo trocoidale ----
Gioco della punta 0,12 mm o inferiore
(0,0047 in o inferiore)0,20 mm
(0,008 in)
Gioco laterale 0,09 ~ 0,17 mm
(0,0035 ~ 0,0067 in)0,24 mm
(0,009 in)
Gioco alloggiamento e rotore 0,03 ~ 0,10 mm
(0,0012 ~ 0,0039 in)0,17 mm
(0,0067 in)
Raffreddamento:
Dimensioni massa radiante
Larghezza 117,8 mm (4,6 in) ----
Altezza 220 mm (8,7 in) ----
Spessore 32 mm (1,26 in) ----
Pressione di apertura tappo radiatore110 kPa (1,1 kg/cm
2
, 15,6 psi)----
Capacità del radiatore (totale) 0,6 L (0,53 Imp qt, 0,63 US qt) ----
Pompa dell’acqua
Tipo Pompa centrifuga ad aspirazione
singola---- Elemento Standard Limite