spare wheel YAMAHA WR 450F 2003 Notices Demploi (in French)
[x] Cancel search | Manufacturer: YAMAHA, Model Year: 2003, Model line: WR 450F, Model: YAMAHA WR 450F 2003Pages: 754, PDF Size: 41.41 MB
Page 242 of 754
3 - 31
INSP
ADJ
REAR BRAKE PAD INSPECTION AND REPLACEMENT
Remove the pad pin
6
and brake pads
7
.
Connect the transparent hose
8
to the
bleed screw
9
and place the suitable con-
tainer under its end.
Loosen the bleed screw and push the cali-
per piston in.
CAUTION:
Do not reuse the drained brake fluid.
Tighten the bleed screw.
T R..
Bleed screw:
6 Nm (0.6 m • kg, 4.3 ft • lb)
Install the brake pad
0
and pad pin
A
.
NOTE:
Install the brake pads with their projec-
tions
a
into the caliper recesses
b
.
Temporarily tighten the pad pin at this
point.
Install the caliper
B
and rear wheel
C
.
Refer to “FRONT WHEEL AND REAR
WHEEL” section in the CHAPTER 5.
Tighten the pad pin
D
.
T R..
Pad pin:
18 Nm (1.8 m • kg, 13 ft • lb)
Install the pad pin plug
E
and protector
F
.
T R..
Pad pin plug:
3 Nm (0.3 m • kg, 2.2 ft • lb)
Bolt (protector):
7 Nm (0.7 m • kg, 5.1 ft • lb)