wheel bolts YAMAHA XENTER 150 2012 Owners Manual

1
2
3
4
5
6
7
8
9
4-3
EAU15582
FOR YOUR SAFETY - PRE-OPERATION CHECKS
ITEM CHECKS PAGE
Wheels and tires• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.6-17~6-19
Brake levers• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.3-7~3-8, 6-23
Centerstand• Make sure that operation is smooth.
• Lubricate pivot if necessary.6-23
Chassis fasteners• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.-
Instruments, lights, signals
and switches• Check operation.
• Correct if necessary.3-2~3-7
52S-F8199-E0_CS.indd 4-352S-F8199-E0_CS.indd 4-3
2011/11/16 13:07:002011/11/16 13:07:00
Process BlackProcess Black

1
2
3
4
5
6
7
8
9
6-4
EAU1722A
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU17717
General maintenance and lubrication chartNO. ITEM CHECK OR MAINTENANCE JOBODOMETER READING
ANNUAL
CHECK
1000 km
(600 mi)6000 km
(3500 mi)
12000 km
(7000 mi)18000 km
(10500 mi)24000 km
(14000 mi)
1 Air lter element• Replace. Every 20000 km (12500 mi)
2 Air lter check hose• Clean.
√√√√√
3V-belt case air lter ele-
ment• Clean.
√√√√
• Replace. Every 20000 km (12500 mi)
4 * Front brake• Check operation, fl uid level and vehicle for fl uid leakage.
√√√√√ √
• Replace brake pads. Whenever worn to the limit
5 * Rear brake• Check operation and adjust brake lever free play.
√√√√√ √
• Replace brake shoes. Whenever worn to the limit
6 * Brake hose• Check for cracks or damage.
• Check for correct routing and clamping.√√√√ √
• Replace. Every 4 years
7 * Wheels• Check runout and for damage.
√√√√
8 * Tires• Check tread depth and for damage.
• Replace if necessary.
• Check air pressure.
• Correct if necessary.√√√√ √
9 * Wheel bearings• Check bearing for looseness or damage.
√√√√
10 * Steering bearings• Check bearing play and steering for roughness.
√√√√√
• Lubricate with lithium-soap-based grease. Every 50000 km (30000 mi)
11 * Chassis fasteners• Make sure that all nuts, bolts and screws are properly
tightened.√√√√ √
52S-F8199-E0_CS.indd 6-452S-F8199-E0_CS.indd 6-4
2011/11/16 13:07:012011/11/16 13:07:01
Process BlackProcess Black