mirror controls YAMAHA XL 800 2001 Owners Manual

2-3
E
1Engine shut-off cord (lanyard)
Attach to wrist so that the engine stops if the
operator falls off the watercraft.
2Engine stop switch
Push to stop the engine normally.
3Clip
Insert into the engine shut-off switch to enable
starting of the engine.
Remove to stop the engine or prevent acci-
dental starting of the engine or unauthorized
use of the watercraft.
4Quick Shift Trim System (QSTS) selector
Use to select the trim angle of the watercraft.
5QSTS shift lock lever
6Engine shut-off switch
Remove the clip to stop the engine and dis-
able it from starting.
7Start switch
Push to start the engine.8Adjustable rearview mirrors
9Multifunction meter
Use to check watercraft operation.
0Shift lever
Use to put the watercraft into forward or
reverse.
AThrottle lever
Use to accelerate and decelerate.
BTilt lever
Use to adjust the tilt of the handlebars.
CReverse gate
Controls direction of jet thrust when in reverse.
DStern drain plugs
Use to drain water in the bilge when the water-
craft is on dry land.
EJet thrust nozzle
Changes the direction of jet thrust according
to handlebar position.
FRide plate
E_F0P71-2.fm Page 3 Tuesday, July 18, 2000 8:20 PM