wheel YAMAHA XTZ125 2007 Owners Manual

VII
VII
SAFETY INFORMATION
TWO-WHEELED Machines ARE SINGLE TRACK VEHICLES. THEIR SAFE USE AND OPERATION ARE DEPENDENT
UPON THE USE OF PROPER RIDING TECHNIQUES AS WELL AS THE EXPERTISE OF THE OPERATOR.
EVERY OPERATOR SHOULD KNOW THE FOLLOWING REQUIREMENTS BEFORE RIDING. HE OR SHE SHOULD.
1. OBTAIN THOROUGH INSTRUCTIONS FORM A COMPETENT SOURCE ON ALL ASPECTS OF MACHINE
OPERATION.
2. OBSERVE THE WARNINGS AND MAINTENANCE REQUIREMENTS IN THE OWNER’S MANUAL.
3. OBTAIN QUALIFIED TRAINING IN SAFE AND PROPER RIDING TECHNIQUES.
4. OBTAIN PROFESSIONAL TECHNICAL SERVICE AS INDICATED BY THE OWNER’S MANUAL AND/OR WHEN
MADE NECESSARY BY MECHANICAL CONDITIONS.
SAFE RIDING
1. Always make pre-operation checks. Careful checks may help prevent an accident.
2. Many accidents involve inexperienced operators.
a. Know your skills and limits. Staying within your limits may help you to avoid an accident.
b. Only lend your machine to experienced operators.
3. Many machine accidents have been caused by machine operator errors. A typical error made by the operator is
veering wide on a turn due to EXCESSIVE SPEED or undercornering (insufficient lean angle for the speed). Never
travel faster than warranted by conditions.
4. Ride cautiously in unfamiliar areas. You may encounter hidden obstacles which could cause an accident.
5. The operator’s posture is important for proper control. The operator should keep both hands on the handlebars and
both feet on the operator footrests during operation to maintain control of the machine.
6. Never ride under the influence of alcohol or drugs.
SAFETY INFORMATION
TWO-WHEELED Machines ARE SINGLE TRACK VEHICLES. THEIR SAFE USE AND OPERATION ARE DEPENDENT
UPON THE USE OF PROPER RIDING TECHNIQUES AS WELL AS THE EXPERTISE OF THE OPERATOR.
EVERY OPERATOR SHOULD KNOW THE FOLLOWING REQUIREMENTS BEFORE RIDING. HE OR SHE SHOULD.
1. OBTAIN THOROUGH INSTRUCTIONS FORM A COMPETENT SOURCE ON ALL ASPECTS OF MACHINE
OPERATION.
2. OBSERVE THE WARNINGS AND MAINTENANCE REQUIREMENTS IN THE OWNER’S MANUAL.
3. OBTAIN QUALIFIED TRAINING IN SAFE AND PROPER RIDING TECHNIQUES.
4. OBTAIN PROFESSIONAL TECHNICAL SERVICE AS INDICATED BY THE OWNER’S MANUAL AND/OR WHEN
MADE NECESSARY BY MECHANICAL CONDITIONS.
SAFE RIDING
1. Always make pre-operation checks. Careful checks may help prevent an accident.
2. Many accidents involve inexperienced operators.
a. Know your skills and limits. Staying within your limits may help you to avoid an accident.
b. Only lend your machine to experienced operators.
3. Many machine accidents have been caused by machine operator errors. A typical error made by the operator is
veering wide on a turn due to EXCESSIVE SPEED or undercornering (insufficient lean angle for the speed). Never
travel faster than warranted by conditions.
4. Ride cautiously in unfamiliar areas. You may encounter hidden obstacles which could cause an accident.
5. The operator’s posture is important for proper control. The operator should keep both hands on the handlebars and
both feet on the operator footrests during operation to maintain control of the machine.
6. Never ride under the influence of alcohol or drugs.

VIII
VIII
PROTECTIVE APPAREL
The majority of fatalities from machine accidents are the result of head injuries. The use of a safety helmet is the single
most critical factor in the prevention or reduction of head injuries.
1. Always wear an approved helmet.
2. Wear a face shield or goggles. Wind on your unprotected eyes could contribute to an impairment of vision which
could delay seeing a hazard.
3. The use of heavy boots, jacket, trousers, gloves, etc. is effective in preventing or reducing abrasions or lacerations.
4. Never wear loose fitting clothing. It could catch on the control levers, footrests, or wheels and cause injury or accident.
5. Never touch the engine or exhaust system during or after operation. They become very hot and can cause burns.
Always wear protective clothing that covers your legs, ankles and feet.
6. Always use clear clothes to make your visualization easier.
7. Items above must also be followed by pillion rider.
MODIFICATION
Modifications made to the machine not approved by Yamaha, or the removal of original equipment, may render your
machine unsafe for use and may cause severe personal injury. Modifications may also make your machine illegal to use.
PROTECTIVE APPAREL
The majority of fatalities from machine accidents are the result of head injuries. The use of a safety helmet is the single
most critical factor in the prevention or reduction of head injuries.
1. Always wear an approved helmet.
2. Wear a face shield or goggles. Wind on your unprotected eyes could contribute to an impairment of vision which
could delay seeing a hazard.
3. The use of heavy boots, jacket, trousers, gloves, etc. is effective in preventing or reducing abrasions or lacerations.
4. Never wear loose fitting clothing. It could catch on the control levers, footrests, or wheels and cause injury or accident.
5. Never touch the engine or exhaust system during or after operation. They become very hot and can cause burns.
Always wear protective clothing that covers your legs, ankles and feet.
6. Always use clear clothes to make your visualization easier.
7. Items above must also be followed by pillion rider.
MODIFICATION
Modifications made to the machine not approved by Yamaha, or the removal of original equipment, may render your
machine unsafe for use and may cause severe personal injury. Modifications may also make your machine illegal to use.

XI
XI
ÍNDICE
DESCRIPTION XTZ 125K ................................... 1-1
DESCRIPTION XTZ 125E ................................... 1-2
MACHINE IDENTIFICATION ................................ 2-1
Vehicle identification number.................... 2-1
Engine serial number................................ 2-1
CONTROL FUNCTIONS...................................... 3-1
Main switch............................................... 3-1
Indicator lights........................................... 3-2
Speedometer ............................................ 3-3
Handlebar switches over left .................... 3-4
Handlebar switches over right .................. 3-5
Clutch lever............................................... 3-6
Shift pedal................................................. 3-6
Front brake lever ....................................... 3-7
Rear brake pedal...................................... 3-7
Fuel tank cap ............................................ 3-8
Fuel cock .................................................. 3-9
Starter lever.............................................. 3-10
Kick Starter............................................... 3-10
Steering lock............................................. 3-11
Seat ........................................................... 3-12
Side covers............................................... 3-13
Rear shock absorber................................ 3-14
Clutch switch operation check .................. 3-15PRE-OPERATION CHECKS ................................ 4-1
Brakes ....................................................... 4-3
Brake fluid leakage ................................... 4-4
Engine oil .................................................. 4-4
Tires .......................................................... 4-5
Clutch ........................................................ 4-8
Throttle grip............................................... 4-8
Fitting/Fasteners ....................................... 4-8
Switches .................................................... 4-8
Wheels ...................................................... 4-8
Fuel ........................................................... 4-9
OPERATION AND IMPORTANT RIDING
POINTS ................................................................. 5-1
Starting a cold engine ............................... 5-2
Starting a warm engine ............................. 5-5
Warming up the engine ............................. 5-5
Shifting ...................................................... 5-6
Tips for reducing fuel consumption ........... 5-7
Engine Break-in........................................ 5-7
Parking ...................................................... 5-8
PERIODIC MAINTENANCE AND MINOR
REPAIRS .............................................................. 6-1
ÍNDICE
DESCRIPTION XTZ 125K ................................... 1-1
DESCRIPTION XTZ 125E ................................... 1-2
MACHINE IDENTIFICATION ................................ 2-1
Vehicle identification number.................... 2-1
Engine serial number................................ 2-1
CONTROL FUNCTIONS...................................... 3-1
Main switch............................................... 3-1
Indicator lights........................................... 3-2
Speedometer ............................................ 3-3
Handlebar switches over left .................... 3-4
Handlebar switches over right .................. 3-5
Clutch lever............................................... 3-6
Shift pedal................................................. 3-6
Front brake lever ....................................... 3-7
Rear brake pedal...................................... 3-7
Fuel tank cap ............................................ 3-8
Fuel cock .................................................. 3-9
Starter lever.............................................. 3-10
Kick Starter............................................... 3-10
Steering lock............................................. 3-11
Seat ........................................................... 3-12
Side covers............................................... 3-13
Rear shock absorber................................ 3-14
Clutch switch operation check .................. 3-15PRE-OPERATION CHECKS ................................ 4-1
Brakes ....................................................... 4-3
Brake fluid leakage ................................... 4-4
Engine oil .................................................. 4-4
Tires .......................................................... 4-5
Clutch ........................................................ 4-8
Throttle grip............................................... 4-8
Fitting/Fasteners ....................................... 4-8
Switches .................................................... 4-8
Wheels ...................................................... 4-8
Fuel ........................................................... 4-9
OPERATION AND IMPORTANT RIDING
POINTS ................................................................. 5-1
Starting a cold engine ............................... 5-2
Starting a warm engine ............................. 5-5
Warming up the engine ............................. 5-5
Shifting ...................................................... 5-6
Tips for reducing fuel consumption ........... 5-7
Engine Break-in........................................ 5-7
Parking ...................................................... 5-8
PERIODIC MAINTENANCE AND MINOR
REPAIRS .............................................................. 6-1

XII
XII
Tool kit ...................................................... 6-2
PERIODIC MAINTENANCE/LUBRICATION ........ 6-3
Torque specifications................................ 6-5
Engine oil .................................................. 6-6
Oil pressure .............................................. 6-9
Air filter...................................................... 6-10
Carburetor adjustment.............................. 6-12
Valve clearance adjustment...................... 6-12
Idle speed adjustment............................... 6-13
Throttle cable adjustment ......................... 6-14
Spark plug inspection............................... 6-15
Clutch adjustment..................................... 6-16
Front brake adjustment............................. 6-17
Rear brake adjustment ............................. 6-18
Brake light switch adjustment ...................6-20
Checking the front brake pads and rear brake
shoes ........................................................ 6-20
Front brake............................................... 6-21
Rear brake................................................ 6-21
Inspecting the brake fluid level ................. 6-22
Brake fluid replacement ............................ 6-23
Drive chain slack check ............................ 6-24
Drive chain slack adjustment .................... 6-25
Drive chain lubrication.............................. 6-26
Cable inspection and lubrication............... 6-26Throttle cable and grip lubrication ............6-27
Brake and shift pedals ..............................6-27
Brake and clutch levers ............................6-27
Rear suspension....................................... 6-28
Sidestand .................................................. 6-28
Front fork inspection................................. 6-29
Rear shock absorber adjustment ..............6-30
Steering inspection................................... 6-31
Wheel bearings......................................... 6-31
Battery...................................................... 6-32
Replenishing the battery fluid ................... 6-33
Storage the battery................................... 6-34
Fuse replacement..................................... 6-34
Headlight bulb replacement...................... 6-35
Front wheel removal................................. 6-37
Front wheel installation............................. 6-38
Rear wheel removal.................................. 6-39
Rear wheel installation.............................. 6-40
Troubleshooting ........................................ 6-41
Troubleshooting chart ............................... 6-42
CLEANING AND STORAGE ................................ 7-1
Cleaning .................................................... 7-1
Storage ..................................................... 7-2
SPECIFICATIONS ................................................ 8-1
Tool kit ...................................................... 6-2
PERIODIC MAINTENANCE/LUBRICATION ........ 6-3
Torque specifications................................ 6-5
Engine oil .................................................. 6-6
Oil pressure .............................................. 6-9
Air filter...................................................... 6-10
Carburetor adjustment.............................. 6-12
Valve clearance adjustment...................... 6-12
Idle speed adjustment............................... 6-13
Throttle cable adjustment ......................... 6-14
Spark plug inspection............................... 6-15
Clutch adjustment..................................... 6-16
Front brake adjustment............................. 6-17
Rear brake adjustment ............................. 6-18
Brake light switch adjustment ...................6-20
Checking the front brake pads and rear brake
shoes ........................................................ 6-20
Front brake............................................... 6-21
Rear brake................................................ 6-21
Inspecting the brake fluid level ................. 6-22
Brake fluid replacement ............................ 6-23
Drive chain slack check ............................ 6-24
Drive chain slack adjustment .................... 6-25
Drive chain lubrication.............................. 6-26
Cable inspection and lubrication............... 6-26Throttle cable and grip lubrication ............6-27
Brake and shift pedals ..............................6-27
Brake and clutch levers ............................6-27
Rear suspension....................................... 6-28
Sidestand .................................................. 6-28
Front fork inspection................................. 6-29
Rear shock absorber adjustment ..............6-30
Steering inspection................................... 6-31
Wheel bearings......................................... 6-31
Battery...................................................... 6-32
Replenishing the battery fluid ................... 6-33
Storage the battery................................... 6-34
Fuse replacement..................................... 6-34
Headlight bulb replacement...................... 6-35
Front wheel removal................................. 6-37
Front wheel installation............................. 6-38
Rear wheel removal.................................. 6-39
Rear wheel installation.............................. 6-40
Troubleshooting ........................................ 6-41
Troubleshooting chart ............................... 6-42
CLEANING AND STORAGE ................................ 7-1
Cleaning .................................................... 7-1
Storage ..................................................... 7-2
SPECIFICATIONS ................................................ 8-1

4-1
4-1
PRE-OPERATION CHECKS
Before using this motorcycle, check the following points:
ITEM ROUTINE PAGE
Front brake
Check operation, condition and free play.
Adjust if necessary
Clutch
Throttle grip / cableCheck for smooth operation.
Lubricate / Adjust if necessary
Check oil level / add oil as necessary
Engine oil
Drive chainCheck chain slack and condition. Lubricate if necessary
Adjust if necessary.
Air filter
Control and meter cableCheck tire pressure, wear, damage and spoke tightness
Check for smooth operation.
Lubricate if necessary4-3 ~ 4-4
6-17 ~ 6-23
4-8 , 6-14 , 6-27
4-4 , 6-6 , 6-9
6-24 ~ 6-26
6-10 ~ 6-11
4-5 ~ 4-8
6-26 Check operation, condition and free play.
Adjust if necessary
Wheels / Tires
Clean and oil it frequently.4-8 , 6-16 Rear brakeCheck operation, free play, fluid level and fluid leakage.
Top-up with DOT #4 (or DOT #3) brake fluid if necessary.
PRE-OPERATION CHECKS
Before using this motorcycle, check the following points:
ITEM ROUTINE PAGE
Front brake
Check operation, condition and free play.
Adjust if necessary
Clutch
Throttle grip / cableCheck for smooth operation.
Lubricate / Adjust if necessary
Check oil level / add oil as necessary
Engine oil
Drive chainCheck chain slack and condition. Lubricate if necessary
Adjust if necessary.
Air filter
Control and meter cableCheck tire pressure, wear, damage and spoke tightness
Check for smooth operation.
Lubricate if necessary4-3 ~ 4-4
6-17 ~ 6-23
4-8 , 6-14 , 6-27
4-4 , 6-6 , 6-9
6-24 ~ 6-26
6-10 ~ 6-11
4-5 ~ 4-8
6-26 Check operation, condition and free play.
Adjust if necessary
Wheels / Tires
Clean and oil it frequently.4-8 , 6-16 Rear brakeCheck operation, free play, fluid level and fluid leakage.
Top-up with DOT #4 (or DOT #3) brake fluid if necessary.

4-7
4-7 After extensive tests, the tires listed below have been
approved by Yamaha for this model. The front and rear
tires should always be by the same manufacturer and
of the same design. No guarantee concerning handling
characteristics can be given if a tire combination other
than one approved by Yamaha is used on this
motorcycle.
FRONT
REAR
Manufacturer
Minimum tire tread depth
(from and rear) !" #$% &'()'
*+,
#% &'()'
!+,1. It is dangerous to ride with a worn-out tire. When
the tire tread begin to show signs of wear, replace
the tire immediately. Brakes, tires and related wheel
parts should be left to a Yamaha dealer.
2. Patching a punctured tube is not recommended. If
it is absolutely necessary to do so, use great care
and replace the tube as soon as possible with a
good quality replacement.
WARNING:WARNING:
After extensive tests, the tires listed below have been
approved by Yamaha for this model. The front and rear
tires should always be by the same manufacturer and
of the same design. No guarantee concerning handling
characteristics can be given if a tire combination other
than one approved by Yamaha is used on this
motorcycle.
FRONT
REAR
Manufacturer
Minimum tire tread depth
(from and rear) !" #$% &'()'
*+,
#% &'()'
!+,1. It is dangerous to ride with a worn-out tire. When
the tire tread begin to show signs of wear, replace
the tire immediately. Brakes, tires and related wheel
parts should be left to a Yamaha dealer.
2. Patching a punctured tube is not recommended. If
it is absolutely necessary to do so, use great care
and replace the tube as soon as possible with a
good quality replacement.
WARNING:WARNING:

4-8
4-8Wheels
To ensure maximum performance, long service, and safe
operation, note the following:
1. Always inspect the wheels before a ride. Check for
cracks, bends, or warpage of the wheel; be sure the
spokes are tight and undamaged. If any abnormal
condition exists in a wheel, consult a Yamaha dealer or
other qualified mechanic. Do not attempt even small
repairs to the wheel. If a wheel is deformed or cracked,
it must be replaced.
2. Tires and wheels should be balanced whenever either
one is changed or replaced. Failure to have a wheel
balanced can result in poor performance, adverse
handling characteristics, and shortened tire life.
3. After installing a tire, ride conservatively to allow the
tire to seat itself on the rim properly. Failure to allow
proper seating may cause tire failure, resulting in
damage to the motorcycle and injury to the rider. Clutch ( See page 6-16 for details)
Check the free play in the clutch lever, and make sure the
lever operates properly. If the free play is incorrect, adjust
it.
Throttle grip (See page 6-14 for details)
Turn the throttle grip to see if it operates properly, and check
the free play.
Make sure the grip returns by spring force when released.
Ask a Yamaha dealer or other qualified mechanic to make
any necessary adjustments.
Fitting/Fasteners
Alway check the tightness of chassis fittings and fasteners
before a ride. Use the chart on page 6-5 to find the correct
torque.
Switches
Check the operation of the starter switch, main switch,
“Engine Stop” switch.
Wheels
To ensure maximum performance, long service, and safe
operation, note the following:
1. Always inspect the wheels before a ride. Check for
cracks, bends, or warpage of the wheel; be sure the
spokes are tight and undamaged. If any abnormal
condition exists in a wheel, consult a Yamaha dealer or
other qualified mechanic. Do not attempt even small
repairs to the wheel. If a wheel is deformed or cracked,
it must be replaced.
2. Tires and wheels should be balanced whenever either
one is changed or replaced. Failure to have a wheel
balanced can result in poor performance, adverse
handling characteristics, and shortened tire life.
3. After installing a tire, ride conservatively to allow the
tire to seat itself on the rim properly. Failure to allow
proper seating may cause tire failure, resulting in
damage to the motorcycle and injury to the rider. Clutch ( See page 6-16 for details)
Check the free play in the clutch lever, and make sure the
lever operates properly. If the free play is incorrect, adjust
it.
Throttle grip (See page 6-14 for details)
Turn the throttle grip to see if it operates properly, and check
the free play.
Make sure the grip returns by spring force when released.
Ask a Yamaha dealer or other qualified mechanic to make
any necessary adjustments.
Fitting/Fasteners
Alway check the tightness of chassis fittings and fasteners
before a ride. Use the chart on page 6-5 to find the correct
torque.
Switches
Check the operation of the starter switch, main switch,
“Engine Stop” switch.

6-3
6-3 PERIODIC MAINTENANCE / LUBRICATION
Wheel bearings* Battery
Check looseness and damage. Check electrolyte level, routing breather pipe.
ITEM
How it sounds
/ Adjust if necessary.
REMARKS1,000KM
Fuel line Air filter
Carburetor*Valves*
Muffler
Brakes* Engine oil
Steering bearings* Rear arm pivot*Check fuel hose, for cracks or damage.Clean or replace if necessary.
Adjust
Check damage, Retighten.
Check operation, adjust.
Grease the brake cam. Replace / Check level
Check loosenes.
Repack every 12,000 km or 12 month.** Check rear arm assembly for looseness.
Moderately repack.***
EVERY
3,000KM
OR ERERY
6 MONTHS
Wheels and tires
Check tire pressure, runout and spoke tightness.
Spark plugCheck condition and clean if necessary.
Replace if necessary every 12,000 Km.
3,000KM
PERIODIC MAINTENANCE / LUBRICATION
Wheel bearings* Battery
Check looseness and damage. Check electrolyte level, routing breather pipe.
ITEM
How it sounds
/ Adjust if necessary.
REMARKS1,000KM
Fuel line Air filter
Carburetor*Valves*
Muffler
Brakes* Engine oil
Steering bearings* Rear arm pivot*Check fuel hose, for cracks or damage.Clean or replace if necessary.
Adjust
Check damage, Retighten.
Check operation, adjust.
Grease the brake cam. Replace / Check level
Check loosenes.
Repack every 12,000 km or 12 month.** Check rear arm assembly for looseness.
Moderately repack.***
EVERY
3,000KM
OR ERERY
6 MONTHS
Wheels and tires
Check tire pressure, runout and spoke tightness.
Spark plugCheck condition and clean if necessary.
Replace if necessary every 12,000 Km.
3,000KM

6-5
6-5
Spark plug12.5 1.25 9.0
Engine oil drain plug20 2.0 14.5
Oil check bolt 7 0.7 5.0
Front wheel axle nut 80 8.0 58
Rear wheel axle nut 80 8.0 58
Use a torque wrench to tighten these items. It is
recommended that these items be checked occasionally,
specially before a long trip. Always check the tightness of
these items whenever they are loosened for any reason.
A
(Nut)
10 mm
12 mm
14 mm
17 mm
19 mm
22 mmB
(Bolt)
6 mm
8 mm
10 mm
12 mm
14 mm
16 mmGeneral torque especifications
Nm
6
15
30
55
85
130kgf.m
0,6
1,5
3,0
5,5
8,5
13,0lbf. ft
4,3
11
22
40
61
94 Torque specifications
Torque
Nm
kgfm Item
Nm
Spark plug12.5 1.25 9.0
Engine oil drain plug20 2.0 14.5
Oil check bolt 7 0.7 5.0
Front wheel axle nut 80 8.0 58
Rear wheel axle nut 80 8.0 58
Use a torque wrench to tighten these items. It is
recommended that these items be checked occasionally,
specially before a long trip. Always check the tightness of
these items whenever they are loosened for any reason.
A
(Nut)
10 mm
12 mm
14 mm
17 mm
19 mm
22 mmB
(Bolt)
6 mm
8 mm
10 mm
12 mm
14 mm
16 mmGeneral torque especifications
Nm
6
15
30
55
85
130kgf.m
0,6
1,5
3,0
5,5
8,5
13,0lbf. ft
4,3
11
22
40
61
94 Torque specifications
Torque
Nm
kgfm Item
Nm

6-19
6-19
ADVERTENCIA
After adjusting the pedal height adjust brake pedal free
play.
2. Freeplay. The rear brake pedal free play should be adjusted to
20 ~ 30 mm (0.8 ~ 1.2 in) at the brake pedal end. Turn
the adjuster on the brake rod clockwise to reduce play
or counterclockwise to increase play.
ADVERTENCIA
Brake pedal free play should be checked whenever the
chain is adjusted or the rear wheel is removed and then
reinstalled.
If it is impossible to make proper adjustment, consult
a Yamaha dealer.
Check the operation of the brake light after adjusting
the rear brake.
1. Adjuster
a.Free play: 20 ~ 30 mm ( 0.8 ~ 1.2 in)
WARNING:
WARNING:
ADVERTENCIA
After adjusting the pedal height adjust brake pedal free
play.
2. Freeplay. The rear brake pedal free play should be adjusted to
20 ~ 30 mm (0.8 ~ 1.2 in) at the brake pedal end. Turn
the adjuster on the brake rod clockwise to reduce play
or counterclockwise to increase play.
ADVERTENCIA
Brake pedal free play should be checked whenever the
chain is adjusted or the rear wheel is removed and then
reinstalled.
If it is impossible to make proper adjustment, consult
a Yamaha dealer.
Check the operation of the brake light after adjusting
the rear brake.
1. Adjuster
a.Free play: 20 ~ 30 mm ( 0.8 ~ 1.2 in)
WARNING:
WARNING: