fuel consumption YAMAHA XV535 2000 Owners Manual

R
OPERATION AND IMPORTANT RIDING POINTS
/Net/layout8/layout_G2/work/Imai_work/OM-PS/AA9149_XV535-E6/English/E-5TOC.frame
Starting the engine ............................................................................. 5-1
Starting a warm engine ...................................................................... 5-3
Shifting ............................................................................................... 5-4
Recommended shift points (for Switzerland only) .............................. 5-4
Tips for reducing fuel consumption .................................................... 5-5
Engine break-in .................................................................................. 5-5
Parking ............................................................................................... 5-6

L
5-5
OPERATION AND IMPORTANT RIDING POINTS
/Net/layout8/layout_G2/work/Imai_work/OM-PS/AA9149_XV535-E6/English/E-5.frame
EAU00424
Tips for reducing fuel
consumption
Your motorcycleÕs fuel consumption
depends to a large extent on your
riding style. The following tips can help
reduce fuel consumption:
lWarm up the engine before riding.
lTurn off the starter (choke) as
soon as possible.
lShift up swiftly and avoid high en-
gine speeds during acceleration.
lDo not double-clutch or rev the en-
gine while shifting down and avoid
high engine speeds with no load
on the engine.
lTurn off the engine instead of let-
ting it idle for an extended length
of time, i.e. in traffic jams, at traffic
lights or railroad crossings.
EAU00436
Engine break-in
There is never a more important period
in the life of your motorcycle than the
period between zero and 1,000 km. For
this reason we ask that you carefully
read the following material. Because
the engine is brand new, you must not
put an excessive load on it for the first
1,000 km. The various parts in the en-
gine wear and polish themselves to the
correct operating clearances. During
this period, prolonged full throttle oper-
ation, or any condition which might re-
sult in excessive heating of the engine,
must be avoided.
EAU00444
0 ~ 150 km
Avoid operation above 1/3 throttle.
Stop the engine and let it cool for 5 to
10 minutes after every hour of opera-
tion. Vary the speed of the motorcycle
from time to time. Do not operate it at
one set throttle position.
150 ~ 500 km
Avoid prolonged operation above
1/2 throttle. Rev the motorcycle freely
through the gears, but do not use full
throttle at any time.
500 ~ 1,000 km
Avoid cruising speeds in excess of
3/4 throttle.
EC000056
CAUTION:
After 1,000 km of operation, be sure
to replace the engine oil, oil filter
and final gear oil.

R
INDEX
/Net/layout8/layout_G2/work/Imai_work/OM-PS/AA9149_XV535-E6/English/XV535IX.-
S
Seats ..................................................... 3-7
Shift pedal .............................................. 3-4
Shifting ................................................... 5-4
Sidestand ............................................... 3-9
Sidestand lubrication ........................... 6-23
Sidestand/clutch switch operation
check ................................................. 3-10
Spark plugs ............................................ 6-5
Specifications ........................................ 8-1
Speedometer ......................................... 3-2
Start switch ............................................ 3-3
Starter (choke) Ò Ó .............................. 3-6
Starting a warm engine .......................... 5-3
Starting the engine ................................ 5-1
Steering inspection .............................. 6-24
Steering lock .......................................... 3-6
Storage .................................................. 7-4
T
Throttle cable and grip lubrication ....... 6-22
Throttle cable free play inspection ....... 6-13
Tips for reducing fuel consumption ........ 5-5
Tires ..................................................... 6-14
Tool kit ................................................... 6-1
Troubleshooting ................................... 6-29
Troubleshooting chart .......................... 6-30
Turn indicator light ................................. 3-1
Turn signal and taillight bulb
replacement ...................................... 6-29
Turn signal switch .................................. 3-2
V
Valve clearance adjustment ................. 6-14
Vehicle identification number ................. 9-1
W
Wheel bearings .................................... 6-24
Wheels ................................................. 6-16