wheel alignment YAMAHA XVS125 2000 Owners Manual

6-26
1
2
3
4
5
6
7
8
9
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU03187
To adjust the drive chain slack
1. Loosen the brake pedal free play
adjusting nut, the axle nut, and
the chain puller locknut at each
end of the swingarm.
1. Brake pedal free play adjusting nut
2. Drive chain puller locknut
2
1
1. Axle nut
1
2. To tighten the drive chain, turn
the adjusting nut at each end of
the swingarm in direction a. To
loosen the drive chain, turn the
adjusting nut at each end of the
swingarm in direction b, and
then push the rear wheel for-
ward.
NOTE:
Using the alignment marks on each
side of the swingarm, make sure that
both adjusting nuts are in the same
position for proper wheel alignment.
1. Alignment marks
2. Drive chain adjusting nut
3. Locknut
312
b
a
5JX-9-E0 4/9/0 4:11 AM Page 54