turn signal YAMAHA YBR125 2007 Owners Manual

TABLE OF CONTENTSAir filter ...........................................................6-10
Carburetor adjustment ................................. 6-11
Idle speed adjustment .................................6-12
Throttle cable free play adjustment .............6-12
Valve clearance adjustment .........................6-13
Tyres ..............................................................6-13
Wheels ..........................................................6-15
Clutch lever free play adjustment ................6-16
Front brake adjustment ................................6-16
Rear brake adjustment ................................6-17
Brake light switch adjustment .....................6-17
Checking the brake shoes ...........................6-18
Drive chain slack check ................................6-18
Drive chain slack adjustment ......................6-19
Drive chain lubrication ..................................6-21
Cable inspection and lubrication .................6-21
Throttle cable and grip lubrication ...............6-21
Brake and shift pedal lubrication .................6-22
Brake and clutch lever lubrication ................6-22
Center and sidestand lubrication ................6-22
Front fork inspection .....................................6-23
Steering inspection ......................................6-23
Wheel bearings ............................................6-24
Battery ...........................................................6-24Fuse replacement ........................................6-26
Headlight bulb replacement ........................6-27
Turn signal and taillight bulb
replacement..................................................6-28
Front wheel removal .....................................6-28
Front wheel installation ................................6-30
Rear wheel removal .....................................6-30
Rear wheel installation ................................6-32
Troubleshooting...........................................6-32
Troubleshooting chart ..................................6-33
CLEANING & STORAGE
A. Cleaning .................................................... 7-1
B. Storage ...................................................... 7-2
SPECIFICATIONS ........................................... 8-1
CUSTOMER INFORMATION........................... 9-1
Key identification number ............................. 9-1
Frame serial number ................................... 9-1
Engine serial number .................................. 9-1
DETATCHMENTS
Pre-Delivery Inspection ................................10-1
Installation....................................................10-5
GREEN BOOK
78910
Libero5TS8.pmd11/3/2006, 8:50 PM 2

Turn signal switch
Horn switch " "
Lights switch To signal a right-hand turn, push the
switch to " ". To signal a left-
hand turn, push the switch to " ".
Once the switch is released it will
return to the center position. To
cancel the signal, push the switch in
after it has returned to the center
position.
Press the switch to sound the horn.
Turning the light switch to " ",
turns on the meter light and tail-light.
Turning the light switch to “ ",
turns the headlight on also.
1. Clutch leverClutch leverThe clutch lever is located on the left
handlebar. Pull the clutch lever to
the handlebar to disengage the
clutch, and release the lever to
engage the clutch. The lever should
be pulled rapidly and released slowly
for smooth clutch operation.
INSTRUMENT AND CONTROL FUNCTIONS
3-3
1. PassSwitch " "
2. Dimmer Switch
3. Light switch
4. Turn signal cum cancellation switch“ “
5. Horn switchHandlebar switchesDimmer switch
Turn the switch to" " for the high
beam and to " " for the low beam. Pass switch""
Press the switch to operate the
Passing Light.
1
1
2
3
4 5

1. Indicator Screws (1 No.)Turn signal and taillight
bulb replacement1. Remove the screws and the
lense.
2. Push the bulb inward and turn it
counterclockwise.
3. Place a new bulb in the socket.
Push the bulb inward and turn it
clockwise until it engages into the
socket.
4. Install the lense and the
screws.1. Tail lamp Screws (2 Nos.)
Do not over-tighten the screws as
the lense may break.
Front wheel removalIt is advisable to have a
YAMAHA dealer service the
wheel.
Securely support the
Motorcycle so there is no
danger of it falling over.
PERIODIC MAINTENANCE AND MINOR REPAIR
6-28
WARNING
CAUTION :

DO’S AND DON’TS FOR THE MOTORCYCLE
8 If misfiring, get your Motorcycle diagnosed & attended immediately without running even for a KM.
9Get Motorcycle maintained regularly as per details and schedule given in Owner’s Manual.
10 Get emission of your Motorcycle inspected at least once every 3 months.
11 Please follow good driven habits in varying traffic conditions.
12 Switch “OFF” the engine while waiting at signal point.
DON’TS ()
1. Don’t overload/overspeed your Motorcycle.
2. Don’t after or modify you Motorcycle.
3. Never drive with Ignition “OFF” while moving down a slope.
4. Don’t turn off the Engine or interrupt the Ignition when the Transmission is in Gear & the Motor
cycle is in motion.
5. Don’t idle the Engine for a prolonged period.
6. Don’t use Non-Genuine Parts.
7. Don’t buy adulterated Petrol/Oil.
3
greenbook.pmd11/3/2006, 8:50 PM 3