oil filter YAMAHA YFM400F 2001 Notices Demploi (in French)

ER
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600TOC-
Lights ................................................ 5-23
Switches ........................................... 5-23
Tires .................................................. 5-25
How to measure tire pressure ........ 5-29
Tire wear limit .................................. 5-31
OPERATION ........................................... 6-1
Starting a cold engine ....................... 6-3
Starting a warm engine ..................... 6-9
Warming up ........................................ 6-9
Drive select lever operation and
reverse driving ............................... 6-11
Engine break-in ................................ 6-17
Parking .............................................. 6-19
Parking on a slope ........................... 6-21
Accessories and loading ................. 6-23
RIDING YOUR ATV ................................ 7-1
Getting to know your ATV ................. 7-3
Ride with care and good
judgement ........................................ 7-5
Be careful where you ride ............... 7-27
Turning your ATV ............................ 7-39
Climbing uphill ................................. 7-45
Riding downhill ................................ 7-55
Crossing a slope ............................... 7-59Crossing through shallow
water ............................................... 7-63
Riding over rough terrain ................ 7-69
Sliding and skidding ........................ 7-71
What to do if ..................................... 7-75
What to do... ..................................... 7-75
PERIODIC MAINTENANCE AND
ADJUSTMENT ....................................... 8-1
Owner’s manual and tool kit ............. 8-3
Periodic maintenance/
lubrication ........................................ 8-7
Panel removal and installation ....... 8-15
Engine oil .......................................... 8-31
Final gear oil ..................................... 8-41
Differential gear oil .......................... 8-47
Cooling system ................................ 8-53
Changing the coolant ...................... 8-57
Front axle boots ............................... 8-63
Spark plug ........................................ 8-65
Air filter cleaning.............................. 8-71
67
8

3-1
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600-3.frame
EL
EBU00032
DESCRIPTION AND MACHINE
IDENTIFICATION
1. Rear spring preload
adjusting ring
2. Storage box and tool kit
3. Spark plug
4. Rear brake fluid
reservoir
5. Radiator cap
6. Front spring preload
adjusting ring
7. V-belt case
8. Rear brake pedal
9. Front spring preload
adjusting ring
10. Fuel cock
11. Air filter case
12. Fuses13. V-belt cooling duct
check hose
14. Coolant reservoir
15. Oil filter cartridge
16. Engine oil dipstick
17. Rear brake lever
18. Left handlebar switches
19. Starter (choke)
20. Horn switch
21. Drive select lever
22. Speedometer
23. Main switch
24. Fuel tank cap
25. Auxiliary DC jack
26. Right handlebar switch
27. Throttle lever
28. Front brake lever
NOTE:

The machine you have purchased may differ
slightly from those shown in the figures of this
manual.

5-17
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600-5.frame
EL
CAUTION:

Be sure to use motor oils that do not contain
anti-friction modifiers. Passenger car motor
oils (often labeled “Energy Conserving”) con-
tain anti-friction additives which will cause
clutch and/or starter clutch slippage, resulting
in reduced component life and poor engine
performance.
Oil quantity:
Total amount:
2.6 L
Periodic oil change:
2.3 L
With oil filter replacement:
2.4 L

Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600-8.frame
EL
8-7
EBU00262
PERIODIC MAINTENANCE/LUBRICATION
ITEM ROUTINEINITIAL EVERY
1
month3
months6
months6
months1
year
Valves*

• Check valve clearance.
• Adjust if necessary.
Cooling system
• Check coolant leakage.
• Repair if necessary.
• Replace coolant every 24 months.
Spark plug
• Check condition.
• Adjust gap and clean.
• Replace if necessary.
Air filter
• Clean.
• Replace if necessary.Every 20~40 hours
(More often in wet or dusty areas.)
Crankcase breather
system*

• Check breather hose for cracks or damage.
• Replace if necessary.

Exhaust system*

• Check for leakage.
• Retighten if necessary.
• Replace gasket(s) if necessary.

Carburetor*

• Check and adjust idle speed/starter operation.
• Adjust if necessary.

Fuel line*

• Check fuel hose for cracks or damage.
• Replace if necessary.

Engine oil

• Replace (Warm engine before draining).

Engine oil filter cartridge

• Replace.

Engine oil strainer*

• Clean.

Final gear oil

• Check oil level/oil leakage.
• Replace every 12 months.

Differential gear oil
Front brake*

• Check operation/fluid leakage/see NOTE page 8-8.
• Correct if necessary.

Rear brake*

• Check operation/fluid leakage/see NOTE page 8-8.
• Correct if necessary.

8-33
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600-8.frame
EL
Engine oil and oil filter cartridge replacement
1. Remove panels E and F. (See pages 8-27 ~
8-29 for removal and installation proce-
dures.)
2. Warm up the engine for several minutes.
3. Stop the engine. Place an oil pan under
the engine and remove the dipstick.
4. Remove the drain bolt and drain the oil.
1. Engine oil drain bolt
2. Oil strainer
1. Boulon de vidange de l’huile
2. Crépine à huile
1. Perno de drenaje del aceite de motor
2. Colador de aceite

8-35
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600-8.frame
EL
5. Remove the oil filter by using an oil filter
wrench.NOTE:An oil filter wrench is available at a nearbyYamaha dealer.
6. Install the drain bolt and tighten it to the
specified torque.
Tightening torque:
Drain bolt:
32 Nm (3.2 m·kg)
1. Oil filter element
1. Élément de filtre à huile
1. Elemento del filtro de aceite1. Oil filter wrench
1. Clé pour filtre à huile
1. Llave para filtros de aceite

8-37
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600-8.frame
EL
7. Apply a light coat of engine oil to the
O-ring of the new oil filter.NOTE:Make sure the O-ring is seated properly.
8. Install the oil filter and tighten it to the
specified torque with an oil filter wrench.
Tightening torque:
Oil filter:
17 Nm (1.7 m·kg)
1. Torque wrench
1. Clé dynamométrique
1. Llave de apriete

8-39
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600-8.frame
EL
9. Fill the engine with sufficient oil to reach
the specified level. Install the dipstick and
tighten it.CAUTION:l
Do not put in any chemical additives. En-
gine oil also lubricates the clutch and ad-
ditives could cause clutch slippage.
l
Be sure no foreign material enters thecrankcase. Recommended oil:
See page 10-2.
Oil quantity:
Total amount:
2.6 L
Periodic oil change:
2.3 L
With oil filter replacement:
2.4 L

8-73
Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600-8.frame
EL
3. Remove the air filter element, and sepa-
rate it from the guide.
4. Wash the element gently but thoroughly
in solvent.
WARNING
Always use parts cleaning solvent to clean the
air filter element. Never use low flash point
solvents or gasoline to clean the air filter ele-
ment because the engine could catch fire orexplode.
5. Squeeze the excess solvent out of the fil-
ter and let it dry.CAUTION:Do not twist the filter element when squeez-ing it.
6. Inspect the element. If damaged, replace
it.
7. Apply SAE 10W30 motor oil to the ele-
ment.NOTE:The element should be wet but not dripping.
1. Air filter element
1. Élément de filtre à air
1. Elemento del filtro de aire1. Air filter guide
1. Guide de filtre à air
1. Filtro de aire guía

Yuki_Data:Yuki_data:Yuki:Yuki_1:ATV:HM00B061_YFM400FWA-61:YFM600SPEC-
10-2
ER
10
101010101010101010101

Engine oil:
Type
-20°
-10°0°10°20°30°40°
50°C
5W/30
10W/30
10W/40
20W/5020W/4015W/40

Recommended engine oil classification: API Service SE, SF, SG type or higher
Quantity:
Periodic oil change
With oil filter replacement
Total amount2.3 L
2.4 L
2.6 L Model YFM400FA / YFM400FWAN
CAUTION
:
Be sure to use motor oils that do not contain anti-
friction modifiers. Passenger car motor oils (often
labeled “Energy Conserving”) contain anti-friction
additives which will cause clutch and/or starter
clutch slippage, resulting in reduced componentlife and poor engine performance.