service YAMAHA YFM600FWA 2001 Manuale de Empleo (in Spanish)

FBU00003
INTRODUCTION
Félicitations pour l’achat du YFM600FWA de Yamaha.
Ce modèle représente le fruit de nombreuses années
d’expérience Yamaha dans la production de véhicules de
sport, de tourisme et de course. Ce véhicule permettra à
son pilote de pleinement apprécier la perfection techni-
que et la fiabilité qui ont fait de Yamaha un leader dans
ces domaines.
Ce manuel apporte une meilleure compréhension des ca-
ractéristiques et du fonctionnement du véhicule. Le ma-
nuel donne en outre des conseils importants relatifs à
la sécurité. Il informe sur les compétences et techni-
ques particulières indispensables au pilotage du véhi-
cule. Ce manuel explique également les procédés
d’inspection et d’entretien élémentaires. Les concession-
naires Yamaha sont au service de leur clientèle et répon-
dront à toute question concernant le fonctionnement ou
l’entretien de ce véhicule.
SBU00003
INTRODUCCION
Le felicitamos por su compra de la Yamaha
YFM600FWA. Representa el resultado de mu-
chos años de experiencia de Yamaha en la pro-
ducción de motos deportivas y de turismo, y de
máquinas de competición que marcan el ritmo
de las carreras. Con la compra de esta Yamaha,
podrá apreciar el alto grado de perfección técni-
ca y fiabilidad que han convertido a Yamaha en
el líder de estos campos.
El presente manual le proporcionará un buen co-
nocimiento básico de las características y el ma-
nejo de la máquina. También contiene
indicaciones importantes acerca de la seguridad
y aporta información sobre las técnicas y habili-
dades especiales necesarias para conducir la
máquina, así como los procedimientos básicos
de mantenimiento e inspección. Si tiene alguna
duda respecto al mantenimiento o manejo de la
máquina, consulte a su concesionario Yamaha.

4-36
FBU00095
Starter (enrichisseur) “ ”
La mise en marche à froid requiert un mélange air-carbu-
rant plus riche. C’est le starter qui remplit cette fonction
d’enrichissement du mélange.
Déplacer dans la direction a pour mettre le starter
(enrichisseur) en service.
Déplacer dans la direction b pour mettre le starter
(enrichisseur) hors service.
La marche à suivre correcte est décrite à la section “Mise
en marche d’un moteur froid”. (Pour plus de détails, voir
page 6-4.)
SBU00095
Starter (choke) “ ”
Cuando el motor está frío, requiere una mezcla
más rica de combustible para arrancar. Esta mez-
cla se suministra a través de un circuito separa-
do, el circuito del “starter”.
Mueva en la dirección a para conectar el starter
(choke).
Mueva en la dirección b para desconectar el
starter (choke).
Consulte el apartado de “Arranque en frío del
motor” para ver la operación adecuada. (Consul-
te la página 6-4.)

5-15
EBU00485
Engine oil
Make sure the engine oil is at the specified lev-
el. Fill with oil as necessary. (See pages 8-15 ~
8-23 for details.)
-20°-10°0°10°20°30°40°50°C
5W/30
10W/30
10W/40
20W/50
15W/40
20W/40
Recommended oil:
Recommended engine oil classification:
API Service SE, SF, SG type or higher

5-16
FBU00485
Huile de moteur
S’assurer que le niveau d’huile de moteur est conforme
aux spécifications. Au besoin, faire le plein d’huile. (Pour
plus de détails, voir pages 8-16 à 8-24.)
-20°-10°0°10°20°30°40°50°C
5W/30
10W/30
10W/40
20W/50
15W/40
20W/40
Huile recommandée:
Classification d’huile de moteur recommandée:
Huiles de type API Service, de classe
SE, SF, SG min.
SBU00485
Aceite de motor
Asegúrese de que el aceite de motor esté al nivel
especificado. Añada aceite como sea necesario.
(Para más detalles, vea las páginas 8-16 ~ 8-24.)
-20°-10°0°10°20°30°40°50°C
5W/30
10W/30
10W/40
20W/50
15W/40
20W/40
Aceite recomendado:
Clasificación del aceite de motor
recomendado:
Servicio API tipo SE, SF, SG o superior

5-21
EBU00152
Fittings and Fasteners
Always check the tightness of chassis fittings
and fasteners before a ride. Take the machine
to a Yamaha dealer or refer to the Service Man-
ual for correct tightening torque.
EBU00153
Lights
Check the headlight and taillight to make sure
they are in working condition. Repair as neces-
sary for proper operation.
EBU00155
Switches
Check the operation of the headlight switch,
engine stop switch and any other switches. Re-
pair as necessary for proper operation.

8-1
EBU00516
PERIODIC MAINTENANCE AND
ADJUSTMENT
Periodic inspection, adjustment and lubrica-
tion will keep your machine in the safest and
most efficient condition possible. Safety is an
obligation of the machine owner. The most im-
portant points of machine inspection, adjust-
ment and lubrication are explained on the
following pages.
WARNING
Never service an engine while it is running.
Moving parts can catch clothing or parts of the
body, causing injury. Electrical components
can cause shocks or can start fires. Turn off the
engine when performing maintenance unless
otherwise specified. Have a Yamaha dealer
perform service if you are not familiar with
machine service.

8-3
1. Tool kit 1. Low-pressure tire gauge
2. Owner’s manual
1. Trousse à outils 1. Manomètre basse pression pour
2. Manuel du propriétaire pneus
1. Equipo de herramientas 1.Manómetro de baja presión
2. Manual del propietario
EBU00258
Owner’s manual and tool kit
You are recommended to put this owner’s
manual and low-pressure tire gauge in the vi-
nyl bag and always carry them along with the
owner’s tool kit under the seat. The service in-
formation included in this manual is intended
to provide you, the owner, with the necessary
information for completing your own preven-
tive maintenance and minor repairs. The tools
provided in the Owner’s tool kit are sufficient
for this purpose, except that a torque wrench is
also necessary to properly tighten nuts and
bolts.
NOTE:
If you do not have a torque wrench available
during a service operation requiring one, take
your machine to a Yamaha dealer to check the
torque settings and adjust them as necessary.

8-8
* It is recommended that these items be serviced by a Yamaha dealer.
** Lithium-soap-based grease
NOTE:
Recommended brake fluid: DOT 4
(If DOT 4 is not available, DOT 3 can be used.)
Brake fluid replacement:
1. When disassembling the master cylinder or caliper cylinder, replace the brake fluid. Normally
check the brake fluid level and add fluid as required.
2. On the inner parts of the master cylinder and caliper cylinder, replace the oil seals every two
years.
3. Replace the brake hoses every four years, or if cracked or damaged.
Reverse lock release
wire*• Check operation.
• Adjust if necessary.
Wheels*• Check balance/damage/runout.
• Repair if necessary.
Wheel bearing*• Check bearing assemblies for looseness/damage.
• Replace if damaged.
Front and rear
suspension*• Check operation.
• Correct if necessary.
Steering system*• Check operation/Replace if damaged.
• Check toe-in/Adjust if necessary.
Drive shaft universal
joint*• Lubricate every 6 months.**
Front axle boots*• Check operation.
• Replace if damaged.
Fittings and Fasteners*• Check all chassis fittings and fasteners.
• Correct if necessary.
ITEM ROUTINEINITIAL EVERY
1
month3
months6
months6
months1
year

8-49
EBU00303
Valve clearance adjustment
The correct valve clearance changes with use,
resulting in improper fuel/air supply or engine
noise. To prevent this, the valve clearance
must be adjusted regularly. This adjustment
however, should be left to a professional
Yamaha service technician.
EBU00307
Throttle lever adjustment
NOTE:
Adjust the engine idling speed before adjust-
ing the throttle lever free play.
1. Loosen the locknut.
2. Turn the adjusting bolt until the throttle le-
ver free play is 3 ~ 5 mm.
3. Tighten the locknut.
1. Locknut 2. Adjusting bolt a. Free play
1. Contre-écrou 2. Boulon de réglage a. Jeu
1. Contratuerca 2. Perno de ajuste a. Juego libre

8-57
EBU00752*
Brake fluid replacement
1. Complete fluid replacement should be
done only by trained Yamaha service per-
sonnel.
2. Have a Yamaha dealer replace the follow-
ing components during periodic mainte-
nance or when they are damaged or
leaking.
●Replace all rubber seals every two years.
●Replace all hoses every four years.