fuse YAMAHA YFM600FWA 2001 Notices Demploi (in French)
[x] Cancel search | Manufacturer: YAMAHA, Model Year: 2001, Model line: YFM600FWA, Model: YAMAHA YFM600FWA 2001Pages: 372, PDF Size: 10.01 MB
Page 16 of 372
Front brake lever free play
adjustment ...................................... 8-59
Rear brake pedal and lever
adjustment ...................................... 8-63
Cable inspection and
lubrication ....................................... 8-69
Brake lever and brake pedal
lubrication ....................................... 8-69
Wheel removal ................................. 8-71
Wheel installation............................. 8-73
Battery ............................................... 8-75
Battery maintenance ........................ 8-79
Fuse replacement ............................. 8-81
Headlight ........................................... 8-83
Troubleshooting ............................... 8-85
Troubleshooting chart ..................... 8-87
CLEANING AND STORAGE ................... 9-1
A. Cleaning.......................................... 9-1
B. Storage ........................................... 9-7
SPECIFICATIONS ................................. 10-1
HOW TO USE THE CONVERSION
TABLE ................................................... 11-1
9
10
11
Page 52 of 372
3-1
EBU00032
DESCRIPTION AND MACHINE
IDENTIFICATION
1. Storage box
2. Air filter
3. Fuel tank cap
4. Oil cooler / cooling fan
5. Reverse lock release
wire
6. Rear brake pedal
7. V-belt housing
8. Auxiliary DC connector
9. Drive select lever
10. Fuel cock
11. Rear shock absorber
12. Fuses13. Recoil starter
14. Engine oil level window
15. Oil filter
16. Rear brake lever
17. Left handlebar switches
18. Parking brake
19. Starter (choke) lever
20. Speedometer
21. Main switch
22. Fuel level gauge
23. On command four-
wheel drive switch
24. Throttle lever
25. Front brake lever
26. Horn
NOTE:
The machine you have purchased may differ
slightly from those shown in the figures of this
manual.
Page 104 of 372
4-45
CAUTION:
●If accessories are used in excess of the
above capacity, or if accessories are used
with the engine not running, the battery
will lose its charge and engine starting
may become difficult.
●Do not use accessories requiring more
than 12V, 10A. This may overload the cir-
cuit and cause a fuse to blow.
Connecting accessory leads
1. Strip off 5 mm of insulation from each ac-
cessory lead. Twist the stranded wires.
a. 5 mm
Page 332 of 372
8-81
EBU00762
Fuse replacement
1. The fuse cases are under the seat.
2. If a fuse is blown, turn off the main switch
and install a new fuse of the specified am-
perage. Then turn on the main switch. If
the fuse immediately blows again, consult
a Yamaha dealer.
WARNING
Always use a fuse of the specified rating. Nev-
er use a material in place of the proper fuse. An
improper fuse can cause damage to the elec-
trical system which could lead to a fire.
CAUTION:
To prevent accidental short-circuiting, turn off
the main switch when checking or replacing a
fuse.Specified fuses:
Main fuse: 20 A
Auxiliary DC connector fuse: 10 A
1. Main fuse 2. Auxiliary DC connector fuse case
1. Fusible principal 2. Boîtier de fusible de prise pour
accessoires
1. Fusible principal 2. Caja del fusible del conector de
CC auxiliar