headlight bulb YAMAHA YFM660R 2001 Manuale de Empleo (in Spanish)
[x] Cancel search | Manufacturer: YAMAHA, Model Year: 2001, Model line: YFM660R, Model: YAMAHA YFM660R 2001Pages: 408, tamaño PDF: 6.86 MB
Page 14 of 408
Yuki_DATA2:HM00G210_YFM660R-60:YFM350TOC-E.frame
EL
Drive chain slack check .................... 8-77
Drive chain slack adjustment .......... 8-79
Lubricating the drive chain.............. 8-81
Cable inspection and lubrication .... 8-85
Brake and shift pedal/brake and
clutch lever lubrication .................. 8-85
Upper arm and lower arm pivot
lubrication....................................... 8-87
Rear arm pivot lubrication............... 8-89
Wheel removal ................................. 8-93
Wheel installation ............................ 8-95
Battery ............................................... 8-97
Battery maintenance ...................... 8-101
Fuse replacement ........................... 8-103
Replacing the headlight bulb ........ 8-105
Tail/brake light bulb
replacement.................................. 8-115
Troubleshooting ............................. 8-117
Troubleshooting chart ................... 8-119
CLEANING AND STORAGE................... 9-1
A. Cleaning ......................................... 9-1
B. storage ............................................ 9-7SPECIFICATIONS ..................................10-1
HOW TO USE THE CONVERSION
TABLE ....................................................11-1
9
10
11
Page 358 of 408
8-105
Yuki_DATA2:HM00G210_YFM660R-60:YFM350-8.frameEL
1. Headlight assembly 2. Bolt (× 2)
1. Bloc de phare 2. Boulon (× 2)
1. Conjunto faro 2. Perno (× 2)
1. Coupler
1. Coupleur
1. Acoplador
EBU00819
Replacing the headlight bulb
1. Remove the headlight assembly by re-
moving the bolts.
2. Disconnect the coupler.
Page 362 of 408
8-109
Yuki_DATA2:HM00G210_YFM660R-60:YFM350-8.frameEL
1. Headlight unit 2. Headlight case
1. Optique de phare 2. Support du phare
1. Unidad del faro 2. Caja del faro
1. Bulb holder cover
1. Cache de la fixation d’ampoule
1. Cubierta del portabombillas
6. Remove the bulb holder cover.
Page 364 of 408
8-111
Yuki_DATA2:HM00G210_YFM660R-60:YFM350-8.frameEL
1. Bulb holder
1. Fixation d’ampoule
1. Portabombillas
1. Bulb 2. Bulb holder
1. Ampoule 2. Fixation d’ampoule
1. Bonbilla 2. Portabombillas
7. Push the bulb holder inward, turn it coun-
terclockwise and remove the defective
bulb.
WARNING
The headlight bulb is hot when it is on and im-
mediately after it is turned off. Wait for the
bulb to cool down before touching or remov-
ing it. You can be burned, or a fire could start if
the bulb touches something flammable.
8. Put a new bulb into position and secure it
in place with the bulb holder.
9. Install the bulb holder cover.
CAUTION:
Make sure the bulb holder cover is securely fit-
ted over the bulb holder and seated against
the reflector.
10. Align the projections with the holders, in-
stall the headlight unit into the case, and
install the screw.
11. Install the headlight cover in the original
position, and then install the screw.
Page 392 of 408
Yuki_DATA2:HM00G210_YFM660R-60:YFM350-SPEC-E.frameEL
10-5
Wheel travel:
Front
Rear230 mm
220 mm
Electrical:
Ignition system
Generator system
Battery type/voltage capacityDC-C.D.I.
A.C. Magneto
YTX14-BS/12 V, 12 AH
Headlight type: Krypton bulb
Bulb voltage, wattage
× quantity:
Headlight
Tail/brake light
Indicator/warning lights:
Neutral
Reverse
Coolant temperature12 V, 30 W/30 W × 2
12 V, 5 W/21 W × 1
12 V, 1.7 W × 1
12 V, 1.7 W × 1
12 V, 1.7 W × 1
Fuse:
Main fuse 20 AMODEL YFM660R