height YAMAHA YFM660R 2001 Notices Demploi (in French)

8-69
Yuki_DATA2:HM00G210_YFM660R-60:YFM350-8.frameEL
EBU00338
Rear brake adjustment
NOTE:
Adjust the rear brake before inspecting the rear
brake pads.
Pedal height adjustment
The top of the brake pedal should be posi-
tioned 4 mm below the top of the footrest. If
not, ask a Yamaha dealer to adjust it.
WARNING
Operating with improperly serviced or adjust-
ed brakes could cause loss of braking ability,
which could lead to an accident.
After servicing:


Make sure the brakes operate smoothly
and that the free play is correct.


Make sure the brakes do not drag.


Make sure the brakes are not spongy. All
air must be bled from the brake system.
Replacement of brake components requires
professional knowledge. These procedures
should be performed by a Yamaha dealer.
a. Brake pedal position
a. Position de la pédale de frein
a. Posición del pedal del freno

Yuki_DATA2:HM00G210_YFM660R-60:YFM350-SPEC-E.frameEL
10-1
EBU00428
SPECIFICATIONS
MODEL YFM660R
Dimension:
Overall length
Overall width
Overall height
Seat height
Wheel base
Ground clearance
Minimum turning radius1,830 mm
1,100 mm
1,150 mm
860 mm
1,245 mm
265 mm
3,300 mm
Basic weight:
With oil and full fuel tank 193 kg
Engine:
Type
Cylinder arrangement
Displacement
Bore× Stroke
Compression ratio
Starting system
Lubrication systemLiquid-cooled, 4-stroke, SOHC
Single cylinder, forward inclined
660 cm
3
100
× 84 mm
9.2 : 1
Electric starter
Dry sump