maintenance YAMAHA YFM700R 2006 Manuale de Empleo (in Spanish)

EBU12031
INTRODUCTION
Congratulations on your purchase of the
Yamaha YFM700R. It represents the result of
many years of Yamaha experience in the pro-
duction of fine sporting, touring, and pacesetting
racing machines. With the purchase of this
Yamaha, you can now appreciate the high
degree of craftsmanship and reliability that have
made Yamaha a leader in these fields.
This manual will provide you with a good basic
understanding of the features and operation of
this ATV.
This manual includes important safety infor-
mation. It provides information about special
techniques and skills necessary to ride your
ATV.
It also includes basic maintenance and inspec-
tion procedures. If you have any questions
regarding the operation or maintenance of your
ATV, please consult a Yamaha dealer.
1S3-9-60 1-3 4/27/05 3:11 PM Page 2

Lights ................................................ 5-31
Switches ........................................... 5-31
OPERATION ........................................ 6-1
Starting the engine ............................. 6-3
Reverse knob operation and reverse
driing ................................................. 6-9
Shifting ............................................. 6-13
To start out and accelerate ............... 6-15
To decelerate ................................... 6-19
Engine break-in ................................ 6-21
Parking ............................................. 6-25
Parking on a slope ............................ 6-27
Accessories and loading .................. 6-31
RIDING YOUR ATV .............................. 7-1
GETTING TO KNOW YOUR ATV ...... 7-3
RIDE WITH CARE AND GOOD
JUDGEMENT ................................... 7-5
BE CAREFUL WHERE YOU RIDE ... 7-27
TURNING YOUR ATV ...................... 7-41CLIMBING UPHILL .......................... 7-47
RIDING DOWNHILL ......................... 7-57
CROSSING A SLOPE .......................7-61
CROSSING THROUGH SHALLOW
WATER .......................................... 7-65
RIDING OVER ROUGH TERRAIN ....7-69
SLIDING AND SKIDDING .................7-71
WHAT TO DO IF ... ...........................7-75
WHAT TO DO ... .............................. 7-75
PERIODIC MAINTENANCE AND
ADJUSTMENT ................................... 8-1
Owner’s manual and tool kit ............... 8-3
PERIODIC MAINTENANCE/
LUBRICATION .................................. 8-7
Panel removal and installation ......... 8-19
Engine oil and oil filter element ........ 8-21
Cooling system ................................. 8-37
Changing the coolant ....................... 8-41
Spark plug inspection ....................... 8-49
Air filter element cleaning ................. 8-55
6
7
8
1S3-9-60 1-3 4/27/05 3:11 PM Page 13

Idle speed adjustment ...................... 8-65
Valve clearance adjustment ............. 8-67
Throttle lever adjustment .................. 8-69
Front and rear brake pad
inspection ....................................... 8-71
Brake fluid level inspection ............... 8-73
Brake fluid replacement .................... 8-77
Front brake lever free play ............... 8-79
Brake pedal height adjustment ......... 8-81
Parking brake adjustment ................. 8-83
Adjusting the rear brake light switch . 8-87
Clutch lever free play adjustment ..... 8-89
Drive chain slack check .................... 8-91
Adjusting the drive chain slack ......... 8-93
Lubricating the drive chain ............... 8-97
Cable inspection and lubrication .... 8-101
Brake and shift pedal/brake and
clutch lever lubrication .................. 8-103
Front upper and lower arm pivot
lubrication ..................................... 8-105
Rear arm pivot lubrication .............. 8-107Wheel removal ............................... 8-111
Wheel installation ........................... 8-113
Battery ............................................ 8-115
Battery maintenance ...................... 8-119
Fuse replacement ........................... 8-121
Replacing a headlight bulb ............. 8-125
Headlight beam adjustment ............ 8-131
Tail/brake light ................................ 8-131
Troubleshooting .............................. 8-133
Troubleshooting chart ..................... 8-137
CLEANING AND STORAGE ................ 9-1
A. CLEANING ..................................... 9-1
B. STORAGE ..................................... 9-7
SPECIFICATIONS .............................. 10-1
Conversion table ................................. 11-1
9
10
11
1S3-9-60 1-3 4/27/05 3:11 PM Page 14

2-5
8Never consume alcohol or drugs before or
while operating this ATV.
8Never operate at speeds too fast for your
skills or the conditions. Always go at a speed
that is proper for the terrain, visibility, operat-
ing conditions, and your experience.
8Never attempt wheelies, jumps, or other
stunts.
8Always inspect your ATV each time you use it
to make sure it is in safe operating condition.
Always follow the inspection and maintenance
procedures and schedules described in this
manual.
8Always keep both hands on the handlebars
and both feet on the footboards of the ATV
during operation.
8Always go slowly and be extra careful when
operating on unfamiliar terrain. Always be
alert to changing terrain conditions when
operating the ATV.
1S3-9-60 1-3 4/27/05 3:11 PM Page 2-5

5-6
w
Always inspect your ATV each time you use it to make sure the ATV is in safe operating condi-
tion.
Always follow the inspection and maintenance procedures and schedules described in the
Owner’s Manual. Failure to inspect increases the possibility of an accident or equipment dam-
age.
XG
Toujours effectuer ces contrôles avant chaque départ afin de s’assurer que le VTT peut être uti-
lisé en toute sécurité.
Toujours respecter les procédés et intervalles de contrôle et d’entretien repris dans ce manuel.
Omettre ces contrôles accroît les risques d’accident ou d’endommagement du véhicule.
XR
Inspeccionar siempre el ATV cada vez que vaya a utilizarse, para asegurarse de que está en
condiciones de funcionar sin peligro.
Seguir siempre los procedimientos y programas de inspección y mantenimiento descritos en
el Manual del Propietario. Si no se inspecciona la máquina, aumenta el riesgo de accidente o
avería.
1S3-9-60 5-6 6/7/05 10:22 AM Page 5-6

7-13
Do not operate after consuming alcohol or
drugs.
Operator’s performance capability is reduced by
the influence of alcohol or drugs.
w
Never consume alcohol or drugs before or
while driving this ATV.
Pre-operation checks
Always perform the pre-operation checks listed
on page 5-1 before riding for safety and proper
care of the ATV.
w
Always inspect your ATV each time you use
it to make sure the ATV is in safe operating
condition. Always follow the inspection and
maintenance procedures and schedules
described in the Owner’s Manual. Failure to
inspect the ATV before operating or failure to
properly maintain the ATV increases the pos-
sibility of an accident or equipment damage.
1S3-9-60 7 4/26/05 6:27 PM Page 156

8-1
EBU05160
PERIODIC MAINTENANCE AND
ADJUSTMENT
Periodic inspection, adjustment and lubrication
will keep your machine in the safest and most
efficient condition possible. Safety is an obliga-
tion of the machine owner. The most important
points of machine inspection, adjustment and
lubrication are explained on the following pages.
w
Never service an engine while it is running.
Moving parts can catch clothing or parts of
the body, causing injury. Electrical compo-
nents can cause shocks or can start fires.
Turn off the engine when performing mainte-
nance unless otherwise specified. Have a
Yamaha dealer perform service if you are not
familiar with machine service.
1S3-9-60 7 4/26/05 6:27 PM Page 224

8-3
EBU12220
Owner’s manual and tool kit
You are recommended to put this owner’s man-
ual and low-pressure tire gauge in the vinyl bag
and always carry them along with the owner’s
tool kit under the seat. The service information
included in this manual is intended to provide
you, the owner, with the necessary information
for completing your own preventive maintenance
and minor repairs. The tools provided in the
owner’s tool kit are sufficient for this purpose,
except that a torque wrench is also necessary to
properly tighten nuts and bolts.
NOTE:
If you do not have a torque wrench available
during a service operation requiring one, take
your machine to a Yamaha dealer to check the
torque settings and adjust them as necessary.
1
2
31
2
1. Owner’s manual
2. Owner’s tool kit
3. Low-pressure tire gauge
1. Manuel du propriétaire
2. Trousse à outils du propriétaire
3. Manomètre basse pression pour pneus
1. Manual del propietario
2. Juego de herramientas del propietario
3. Manómetro de baja presión
1S3-9-60 8 6/7/05 10:25 AM Page 8-3

8-7
EBU02622
PERIODIC MAINTENANCE/LUBRICATION
NOTE:8For ATVs not equipped with an odometer or an hour meter, follow the month maintenance intervals.
8For ATVs equipped with an odometer or an hour meter, follow the km (mi) or hours maintenance intervals. However, keep in mind
that if the ATV isn’t used for a long period of time, the month maintenance intervals should be followed.
8Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills.
INITIAL EVERY
month 1 3 6 6 12
ITEM ROUTINEWhichever
km 320 1200 2400 2400 4800 comes first
(mi) (200) (750) (1500) (1500) (3000)
hours 20 75 150 150 300
Fuel line*9Check fuel hose for cracks or damage.
222
9Replace if necessary.
9Check condition.
Spark plug9Adjust gap and clean.22222
9Replace if necessary.
Valves*9Check valve clearance.
2 222
9Adjust if necessary.
Fuel injection*9Check and adjust engine idle speed.22222
Crankcase breather9Check breather hose for cracks or damage.
222
system*9Replace if necessary.
9Check for leakage.
Exhaust system*9Tighten if necessary.222
9Replace gasket if necessary.
1S3-9-60 8 6/7/05 10:25 AM Page 8-7

8-19
EBU08070
Panel removal and installation
The panel illustrated needs to be removed to
perform some of the maintenance described in
this chapter.
Refer to this section each time the panel has to
be removed or installed.
EBU10130
Panel A
To remove
Remove the bolts, and then take the panel off.
To install
Place the panel in the original position, and then
install the bolts.
1
1 2
2
1. Panel A1. Panel A1. Panel A
1. Panel A 2. Bolt (
×2)1. Panel A2. Boulon (×2)1. Panel A 2. Perno (×2)
1S3-9-60 8 6/7/05 10:25 AM Page 8-19