clock YAMAHA YFM700R 2006 Owners Manual

4-27
1
1. Fuel tank cap1. Bouchon de réservoir de carburant1. Tapón del depósito de combustible
EBU00920
Fuel tank cap
Remove the fuel tank cap by turning it counter-
clockwise.
1S3-9-60 4 6/7/05 9:37 AM Page 4-27

6-9
2
1
1. Reverse knob “REV”
2. Shift pedal
1. Bouton de marche arrière “REV”
2. Pédale de sélection
1. Botón de marcha atrás “REV”
2. Pedal del cambio
EBU12102
Reverse knob operation and reverse driving
cC
Before shifting, stop the machine and return
the throttle lever to its closed position, other-
wise the transmission may be damaged.
1. Bring the machine to a complete stop,
return the throttle lever to the closed posi-
tion, apply the clutch lever, and then shift
the transmission into first gear.
2. While applying the brake pedal, turn the
reverse knob clockwise with your right
hand.
3. Apply the clutch lever and shift the trans-
mission into reverse by pressing down on
the shift pedal.
NOTE:
When in reverse, the reverse indicator light
should be on. If the light does not come on, ask
a Yamaha dealer to inspect the machine.
1S3-9-60 5-6 6/7/05 10:22 AM Page 6-9

8-127
4. Push the headlight bulb holder in and turn
it counterclockwise to remove.
5. Remove the defective bulb and replace it
with a new bulb.
w
Do not touch a headlight bulb when it is on
or immediately after it is turned off. You can
be burned or a fire could start if the bulb
touches something flammable. Wait for the
bulb to cool before touching or removing it.
cC
Do not touch the glass part of the headlight
bulb to keep it free from oil, otherwise the
transparency of the glass, the luminosity of
the bulb, and the bulb life will be adversely
affected. Thoroughly clean off any dirt and
fingerprints on the headlight bulb using a
cloth moistened with alcohol or thinner.
1. Headlight bulb holder1. Fixation d’ampoule de phare1. Portabombillas del faro
1. Do not touch the glass part of the bulb.
1. Ne pas toucher le verre de l’ampoule1. Ne tocar la parte de cristal de la bombilla
1S3-9-60 9-11 4/27/05 2:13 PM Page 8-127

8-129
6. Push the headlight bulb holder in and turn
it clockwise to install.
7. Install the headlight bulb holder cover.
8. Connect the headlight coupler.
9. Install the headlight assembly by installing
the bolts.
10. Adjust the headlight beam if necessary.
1S3-9-60 9-11 4/27/05 2:13 PM Page 8-129