diagram YAMAHA YZ250F 2007 Owners Manual
[x] Cancel search | Manufacturer: YAMAHA, Model Year: 2007, Model line: YZ250F, Model: YAMAHA YZ250F 2007Pages: 676, PDF Size: 21.24 MB
Page 14 of 676
EC083000
MANUAL FORMAT
All of the procedures in this manual are organized in a sequential, step-by-step format. The informa-
tion has been complied to provide the mechanic with an easy to read, handy reference that contains
comprehensive explanations of all disassembly, repair, assembly, and inspection operations.
In this revised format, the condition of a faulty component will precede an arrow symbol and the
course of action required will follow the symbol, e.g.,
Bearings
Pitting/damage →
Replace.
EC084002
HOW TO READ DESCRIPTIONS
To help identify parts and clarify procedure steps, there are exploded diagrams at the start of each
removal and disassembly section.
1. An easy-to-see exploded diagram 1
is provided for removal and disassembly jobs.
2. Numbers 2
are given in the order of the jobs in the exploded diagram. A number that is
enclosed by a circle indicates a disassembly step.
3. An explanation of jobs and notes is presented in an easy-to-read way by the use of symbol
marks 3
. The meanings of the symbol marks are given on the next page.
4. A job instruction chart 4
accompanies the exploded diagram, providing the order of jobs, names
of parts, notes in jobs, etc.
5. Extent of removal 5
is provided in the job instruction chart to save the trouble of an unneces-
sary removal job.
6. For jobs requiring more information, the step-by-step format supplements 6
are given in addi-
tion to the exploded diagram and job instruction chart.
Page 15 of 676
AUFBAU
Diese Anleitung wurde zusammen-
gestellt, um dem Benutzer ein leicht
verständliches Nachschlagewerk in
die Hand zu geben, in dem alle dar-
gestellten Arbeitsvorgänge (Ein- und
Ausbau, Zerlegung und Zusammen-
bau, Prüfung und Reparatur) detail-
liert und in der entsprechenden
Reihenfolge beschrieben sind.
Je nach Zustand eines fehlerhaften
Bauteils weist ein Pfeilsymbol auf die
erforderliche Maßnahme hin. Bei-
spiel:
Lager
Pitting/Beschädigung → Erneuern.
LESEN DER BESCHREIBUNGEN
Um bei der Identifikation der Teile zu
helfen und die Arbeitsschritte zu ver-
deutlichen, sind Explosionsdia-
gramme am Beginn jedes Ausbau-
und Demontageabschnittes darge-
stellt.
1. Für die Ausbau- und Demonta-
gearbeiten ist meistens ein über-
sichtliches Explosionsdiagramm
1 dargestellt.
2. Die Nummern 2 in dem Explosi-
onsdiagramm sind in der Rei-
henfolge der Arbeiten
aufgeführt. Eine in einen Kreis
eingeschriebene Nummer
bezeichnet einen Demontage-
schritt.
3. Eine Erläuterung der Arbeiten
und Hinweise ist durch ablese-
freundliche Symbolmarkierun-
gen 3 gegeben. Die
Bedeutungen der Symbolmar-
kierungen sind auf der nächsten
Seite aufgeführt.
4. Eine Arbeitsanweisungstabelle
4 begleitet das Explosionsdia-
gramm und gibt die Arbeitsrei-
henfolge, Bezeichnung der
Teile, Hinweise zu den Arbeiten
usw. an.
5. Der Umfang des Ausbaus 5 ist
in der Arbeitsanweisungstabelle
aufgeführt, um nicht erforderli-
che Ausbauarbeiten zu vermei-
den.
6. Für Arbeiten, für die weitere
Informationen benötigt werden,
sind schrittweise Ergänzungen
6 zusätzlich zu dem Explosi-
onsdiagramm und der Arbeitsan-
weisungstabelle aufgeführt.
FORMAT DU MANUEL
Dans ce manuel, toutes les procédures
sont décrites pas à pas. Les informations
ont été condensées pour fournir au méca-
nicien un guide pratique et facile à lire,
contenant des explications claires pour
toutes les procédures de démontage,
réparation, remontage et vérification.
Dans ce nouveau format, l’état d’un
composant défectueux est suivi d’une
flèche qui indique les mesures à prendre.
Exemple:
Roulements
Piqûres/endommagement → Rempla-
cer.
COMMENT LIRE LES DESCRIP-
TIONS
Chaque section détaillant des étapes de
démontage ou de remontage est précédée
de vues en éclaté qui permettent de clari-
fier ces opérations.
1. Exemple de vue en éclaté 1 clari-
fiant les opérations de démontage et
de remontage.
2. Sur les vues en éclaté, les pièces
sont numérotées 2 dans l’ordre des
opérations à effectuer. Un chiffre
entouré d’un cercle correspond à
une étape de démontage.
3. Les vues en éclaté portent égale-
ment des symboles 3 qui rappel-
lent des points importants à ne pas
oublier. La signification de ces sym-
boles est expliquée à la page sui-
vante.
4. Les vues en éclaté sont suivies d’un
tableau 4 fournissant l’ordre des
opérations, le nom des pièces, des
remarques, etc.
5. Pour éviter la dépose superflue de
pièces, l’étendue de la dépose 5 est
indiquée dans le tableau de descrip-
tion du travail.
6. Pour les travaux qui demandent des
explications supplémentaires, la vue
en éclaté et le tableau sont suivis
d’une description détaillée 6 des
opérations.
STRUTTURA DEL
MANUALE
Tutte le procedure di questo manuale
sono organizzate in sequenze passo a
passo. Le informazioni sono state redatte
in modo tale da fornire al meccanico un
riferimento comodo e di agevole lettura
che comprenda, al contempo, spiega-
zioni complete relative alle operazioni di
smontaggio, riparazione, montaggio ed
ispezione.
In questo nuovo formato, la condizione
di un componente non funzionante pre-
cede una freccia e l’azione richiesta
segue il simbolo., ad es.:
Cuscinetti
Puntinatura/danno → Sostituire.
COME LEGGERE LE DESCRI-
ZIONI
Allo scopo di agevolare l’identificazione
dei pezzi e di chiarire le fasi delle varie
procedure, sono state inserite rappresen-
tazioni esplose all’inizio di ciascun para-
grafo dedicato alla rimozione e allo
smontaggio.
1. Una rappresentazione esplosa di
immediata comprensione 1 viene
fornita per agevolare le operazioni
di rimozione e smontaggio.
2. I numeri 2 sono indicati nella rap-
presentazione esplosa secondo la
sequenza di lavoro. Un numero rac-
chiuso in un cerchietto indica una
fase di un’operazione di smontag-
gio.
3. Una spiegazione delle operazioni e
delle note viene illustrata in maniera
chiara dall’impiego di riferimenti
simbolici 3. Il significato dei riferi-
menti simbolici viene fornito alla
pagina seguente.
4. Uno schema di istruzioni di lavoro
4 unitamente alla rappresenta-
zione esplosa, fornisce la sequenza
dei lavori, i nomi dei pezzi, le note
relative ai lavori, ecc.
5. L’indicazione relativa alla portata
dell’intervento di rimozione 5
viene fornita nello schema di istru-
zioni per evitare operazioni di rimo-
zione non necessaire.
6. Per quegli interventi che richiedono
maggiori informazioni, vengono
forniti supplementi in formato passo
a passo 6 oltre alla rappresenta-
zione esplosa e allo schema di istru-
zioni.
Page 16 of 676
ILLUSTRATED SYMBOLS
(Refer to the illustration)
Illustrated symbols 1 to 7 are designed as
thumb tabs to indicate the chapter’s number
and content.
1General information
2Specifications
3Regular inspection and adjustments
4Engine
5Chassis
6Electrical
7Tuning
Illustrated symbols 8 to D are used to identify
the specifications appearing in the text.
8With engine mounted
9Special tool
0Filling fluid
ALubricant
BTightening
CSpecified value, Service limit
DResistance (
Ω), Voltage (V), Electric current (A)
Illustrated symbols E to H in the exploded
diagrams indicate grade of lubricant and loca-
tion of lubrication point.
EApply engine oil
FApply molybdenum disulfide oil
GApply lightweight lithium-soap base grease
HApply molybdenum disulfide grease
Illustrated symbols I to J in the exploded
diagrams indicate where to apply a locking
agent and where to install new parts.
IApply locking agent (LOCTITE®)
JUse new one 12
34
56
78
90
AB
CD
EF
GH
IJ
GEN
INFOSPEC
INSP
ADJ
ENG
CHAS–+ELEC
TUN
T R..
EM
BM
Page 20 of 676
EC0A0000
CONTENTS
CHAPTER 1
GENERAL INFORMATION
DESCRIPTION
............................................1-1
MACHINE IDENTIFICATION
......................1-2
IMPORTANT INFORMATION
.....................1-3
CHECKING OF CONNECTION
..................1-6
SPECIAL TOOLS
.......................................1-7
CONTROL FUNCTIONS
...........................1-10
FUEL
.........................................................1-13
STARTING AND BREAK-IN
.....................1-14
TORQUE-CHECK POINTS
.......................1-18
CLEANING AND STORAGE
....................1-19
CHAPTER 2
SPECIFICATIONS
GENERAL SPECIFICATIONS
....................2-1
MAINTENANCE SPECIFICATIONS
...........2-4
GENERAL TORQUE
SPECIFICATIONS
....................................2-17
DEFINITION OF UNITS
............................2-17
LUBRICATION DIAGRAMS
.....................2-18
CABLE ROUTING DIAGRAM
..................2-20
CHAPTER 3
REGULAR INSPECTION AND
ADJUSTMENTS
MAINTENANCE INTERVALS
....................3-1
PRE-OPERATION INSPECTION
AND MAINTENANCE
.................................3-4
ENGINE
.......................................................3-5
CHASSIS
..................................................3-23
ELECTRICAL
............................................3-45
Page 21 of 676
INHALT
KAPITEL 1
ALLGEMEINE
ANGABEN
FAHRZEUGBESCHREIBUNG.... 1-1
FAHRZEUG-
IDENTIFIZIERUNG...................... 1-2
WICHTIGE INFORMATIONEN.... 1-3
KABELANSCHLÜSSE
KONTROLLIEREN...................... 1-6
SPEZIALWERKZEUGE.............. 1-7
BEDIENUNGSELEMENTE
UND DEREN FUNKTION.......... 1-10
KRAFTSTOFF........................... 1-13
STARTEN UND EINFAHREN... 1-14
ANZUGSDREHMOMENTE
KONTROLLIEREN.................... 1-18
PFLEGE UND LAGERUNG...... 1-19
KAPITEL 2
TECHNISCHE DATEN
ALLGEMEINE TECHNISCHE
DATEN........................................ 2-1
WARTUNGSDATEN................... 2-4
ALLGEMEINE
ANZUGSMOMENTE................. 2-17
MASSEINHEITEN..................... 2-17
SCHMIERSYSTEM-
SCHAUBILDER......................... 2-18
KABELFÜHRUNGSDIA-
GRAMME.................................. 2-20
KAPITEL 3
REGELMÄSSIGE
WARTUNGS- UND
EINSTELLARBEITEN
WARTUNGSINTERVALLE......... 3-1
ROUTINEKONTROLLE VOR
FAHRTBEGINN........................... 3-4
MOTOR....................................... 3-5
FAHRWERK.............................. 3-23
ELEKTRISCHE ANLAGE......... 3-45
TABLES DES
MATIERES
CHAPITRE 1
RENSEIGNEMENTS
GENERAUX
DESCRIPTION............................... 1-1
IDENTIFICATION
DE LA MOTO................................. 1-2
INFORMATIONS
IMPORTANTES............................. 1-3
VERIFICATION
DES CONNEXIONS....................... 1-6
OUTILS SPECIAUX....................... 1-7
FONCTIONS
DES COMMANDES..................... 1-10
CARBURANT................................ 1-13
MISE EN MARCHE
ET RODAGE................................. 1-14
POINTS DE VERIFICATION
DES COUPLES
DE SERRAGE............................... 1-18
NETTOYAGE
ET REMISAGE............................. 1-19
CHAPITRE 2
CARACTERISTIQUES
CARACTERISTIQUES
GENERALES................................... 2-1
CARACTERISTIQUES
D’ENTRETIEN............................... 2-4
CARACTERISTIQUES
GENERALES DE COUPLE........ 2-17
DEFINITION DES UNITES........ 2-17
DIAGRAMMES DE
LUBRIFICATION......................... 2-18
DIAGRAMME
D’ACHEMINEMENT
DES CABLES................................ 2-20
CHAPITRE 3
CONTROLES
ET REGLAGES
PERIODIQUES
PROGRAMME
D’ENTRETIEN............................... 3-1
CONTROLE ET ENTRETIEN
AVANT UTILISATION................. 3-4
MOTEUR......................................... 3-5
CHASSIS........................................ 3-23
PARTIE ELECTRIQUE.............. 3-45
INDICE
CAPITOLO 1
INFORMAZIONI
GENERALI
DESCRIZIONE............................... 1-1
NUMERO DI SERIE
DEL MEZZO................................... 1-2
INFORMAZIONI
IMPORTANTI................................. 1-3
CONTROLLO
DEL COLLEGAMENTO............... 1-6
ATTREZZI SPECIALI................... 1-7
FUNZIONI DI CONTROLLO..... 1-10
CARBURANTE............................. 1-13
AVVIAMENTO
E RODAGGIO............................... 1-14
PUNTI DI CONTROLLO
SERRAGGIO................................. 1-18
PULIZIA E CUSTODIA
DEL MEZZO................................. 1-19
CAPITOLO 2
DATI TECNICI
DATI TECNICI GENERALI......... 2-1
SPECIFICHE
DI MANUTENZIONE.................... 2-4
SPECIFICHE GENERALI
DI SERRAGGIO............................ 2-17
DEFINIZIONE DELLE UNITÀ
DI MISURA.................................... 2-17
SCHEMI DI
LUBRIFICAZIONE...................... 2-18
SCHEMA PERCORSO
DEI CAVI....................................... 2-20
CAPITOLO 3
CONTROLLI
E REGOLAZIONI
PERIODICHE
INTERVALLI DI
MANUTENZIONE.......................... 3-1
CONTROLLI E MANUTENZIONE
DA COMPIERE PRIMA DELLA
MESSA IN FUNZIONE.................. 3-4
MOTORE......................................... 3-5
PARTE CICLISTICA................... 3-23
IMPIANTO ELETTRICO............ 3-45
Page 24 of 676
CHAPTER 6
ELECTRICAL
ELECTRICAL COMPONENTS
AND WIRING DIAGRAM............................6-1
IGNITION SYSTEM.....................................6-2
THROTTLE POSITION SENSOR
SYSTEM......................................................6-6
CHAPTER 7
TUNING
ENGINE.......................................................7-1
CHASSIS..................................................7-11
Page 142 of 676
2 - 18
SPEC
LUBRICATION DIAGRAMS
1Oil filter element
2Oil pump
3Drive axle
4Main axle
5Intake camshaft
6Exhaust camshaft
7Oil tank
8Oil delivery pipe
ÈTo oil tank
LUBRICATION DIAGRAMS
Page 143 of 676
2 - 18
SPEC
SCHMIERSYSTEM-
SCHAUBILDER
1Ölfiltereinsatz
2Ölpumpe
3Ausgangswelle
4Eingangswelle
5Einlass-Nockenwelle
6Auslass-Nockenwelle
7Öltank
8Ölzufuhrleitung
ÈZum Öltank
DIAGRAMMES DE
LUBRIFICATION
1Elément de filtre à huile
2Pompe à huile
3Arbre secondaire
4Arbre principal
5Arbre à cames d’admission
6Arbre à cames d’échappement
7Réservoir d’huile
8Tuyau d’amenée d’huile
ÈVers le réservoir d’huile
SCHEMI DI
LUBRIFICAZIONE
1Elemento filtro olio
2Pompa dell’olio
3Asse conduttore
4Asse principale
5Albero a camme di aspirazione
6Albero a camme di scarico
7Serbatoio dell’olio
8Tubo di mandata olio
ÈAl serbatoio dell’olio
DIAGRAMMES DE LUBRIFICATION
SCHMIERSYSTEM-SCHAUBILDER
SCHEMI DI LUBRIFICAZIONE
Page 144 of 676
2 - 19
SPEC
1Crankshaft
2Oil filter element
3Oil tank
4Oil hose
ÈFrom oil pump
LUBRICATION DIAGRAMS
Page 145 of 676
2 - 19
SPEC
1Kurbelwelle
2Ölfiltereinsatz
3Öltank
4Ölschlauch
ÈVon der Ölpumpe 1Vilebrequin
2Elément de filtre à huile
3Réservoir d’huile
4Durit d’huile
ÈDe la pompe à huile1Albero motore
2Elemento filtro olio
3Serbatoio dell’olio
4Flessibile olio
ÈDalla pompa dell’olio
DIAGRAMMES DE LUBRIFICATION
SCHMIERSYSTEM-SCHAUBILDER
SCHEMI DI LUBRIFICAZIONE