driver seat adjustment YAMAHA YZF-R125 2015 Owners Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
6-9
6 Cowling C
To remove the cowling
Remove the screws, and then pull the
cowling off as shown.
To install the cowlingPlace the cowling in the original posi-
tion, and then install the screws.
Cowling D
To remove the cowling1. Remove panel A, cowlings A, B
and C.2. Remove the screws and the quick
fasteners, and then take the cowl-
ing off.
TIPThe quick fastener is removed by
pushing the center pin in with a screw-
driver, then pulling the fastener out.To install the cowling1. Place the cowling in the original
position, and then install the
screws and the quick fasteners.
TIPTo install the quick fasteners, push the
center pin out so that it will protrude
from the fastener head, insert the fas-
tener into the cowling, and then push
the protruding pin in until it is flush with
the fastener head.2. Install cowlings C, B, A and panel
A.
EAUM2371
Panel A
To remove the panel1. Remove the rider seat. (See page
3-18.)
2. Remove the screws, and then take
the panel off.
1. Screw
2. Cowling CZAUM1172
1. Quick fastener
2. Screw
3. Cowling DZAUM1173
U5D7E5E0.book Page 9 Thursday, August 21, 2014 9:30 AM