wheel YAMAHA YZF-R6 2003 Owner's Manual

8-1
8
EAU01038
8-SPECIFICATIONSSpecifications CS-01E
Model YZF-R6
Dimensions
Overall length 2,025 mm
Overall width 690 mm
Overall height 1,090 mm
Seat height 820 mm
Wheelbase 1,380 mm
Ground clearance 135 mm
Minimum turning radius 3,400 mm
Basic weight (with oil and full
fuel tank)
182 kg
Engine
Engine type Liquid-cooled 4-stroke, DOHC
Cylinder arrangement Forward-inclined parallel
4-cylinder
Displacement 600 cm
3
Bore × stroke 65.5 × 44.5 mm
Compression ratio 12.4:1
Starting system Electric starter
Lubrication system Wet sumpEngine oil
Ty p e
Recommended engine oil
classification API Service SE, SF, SG or
higher
Quantity
Without oil filter cartridge
replacement 2.4 L
With oil filter car tridge
replacement 2.6 L
Total amount (dry engine) 3.4 L
-20 -10 0
10 20 30
40
50 ˚C
SAE 10W-30
SAE 15W-40SAE 20W-40SAE 20W-50
SAE 10W-40
CAUTION:In order to prevent clutch slippage (since the engine oil also
lubricates the clutch), do not mix any chemical additives. Do
not use oils with a diesel specification of “CD” or oils of a
higher quality than specified. In addition, do not use oils la-
beled “ENERGY CONSERVING II” or higher.
U5SLE0.book Page 1 Wednesday, September 11, 2002 11:46 AM

SPECIFICATIONS
8-3
8
Maximum load* 193 kg
Tire air pressure (measured on
cold tires)
Up to 90 kg*
Front 250 kPa (2.50 kgf/cm
2, 2.50 bar)
Rear 250 kPa (2.50 kgf/cm2, 2.50 bar)
90 kg–maximum*
Front 250 kPa (2.50 kgf/cm2, 2.50 bar)
Rear 290 kPa (2.90 kgf/cm2, 2.90 bar)
High-speed riding*
Front 250 kPa (2.50 kgf/cm2, 2.50 bar)
Rear 250 kPa (2.50 kgf/cm2, 2.50 bar)
* Total weight of rider, passenger, cargo and accessories
Wheels
Front
Type Cast wheel
Size 17 M/C × MT 3.50
Rear
Type Cast wheel
Size 17 M/C × MT 5.50Brakes
Fr o n t
Type Dual disc brake
Operation Right hand
Fluid DOT 4
Rear
Type Single disc brake
Operation Right foot
Fluid DOT 4
Suspension
Front Telescopic fork
Rear Swingarm (link suspension)
Spring/shock absorber
Front Coil spring / oil damper
Rear Coil spring / gas-oil damper
Wheel travel
Front 120 mm
Rear 120 mm
Electrical system
Ignition system DC-C.D.I.
Charging system
Model A.C. magneto
Standard output 14 V, 300 W@ 5,000 r/min
U5SLE0.book Page 3 Wednesday, September 11, 2002 11:46 AM

INDEX
SSafety information.................................... 1-1
Seats ..................................................... 3-19
Passenger seat ................................ 3-20
Rider seat ........................................ 3-19
Shifting .................................................... 5-2
Shift pedal ............................................. 3-15
Shift points (for Switzerland only)............. 5-3
Shift timing indicator light ......................... 3-6
Shock absorber assembly, adjusting ..... 3-25
Sidestand .............................................. 3-27
Sidestand, checking and lubricating....... 6-36
Spark plugs, checking ............................. 6-8
Specifications .......................................... 8-1
Starting the engine .................................. 5-1
Start switch ............................................ 3-15
Steering, checking ................................. 6-37
Storage.................................................... 7-4
Storage compartment ............................ 3-21
Supporting the motorcycle ..................... 6-45TTachometer ........................................... 3-13
Tail/brake light ....................................... 6-44
Throttle cable free play, adjusting .......... 6-23
Throttle grip and cable, checking and
lubricating............................................ 6-34
Tires ...................................................... 6-24
Tool kit..................................................... 6-1
Troubleshooting..................................... 6-51
Troubleshooting charts .......................... 6-52
Turn signal indicator lights ....................... 3-4
Turn signal light bulb, replacing ............. 6-44
Turn signal switch ................................. 3-14VValve clearance, adjusting .................... 6-24
Vehicle identification number................... 9-1WWheel bearings, checking ..................... 6-38
Wheel (front) ......................................... 6-46
Installing .......................................... 6-47
Removing ........................................ 6-46
Wheel (rear) .......................................... 6-49
Installing .......................................... 6-50
Removing ........................................ 6-49
Wheels .................................................. 6-27
U5SLE0.book Page 2 Wednesday, September 11, 2002 11:46 AM