ESP Abarth 500 2010 Owner handbook (in English)

98
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
IINDEX
YOUR CAR
SAFETY
DEVICES
CORRECT USE
OF THE
CAR
IN AN
EMERGENCY
QUICK TYRE REPAIR
KIT - Automatic FIX &
GO
The quick tyre repair kit Fix & Go auto-
matic is placed in the boot A-fig. 2.
Signal that the vehicle is sta-
tionary in accordance with
the following legal requirements:
hazard warning lights, emergency
warning triangle, etc. It is advisable
for the people in the vehicle to get
out, especially if the vehicle is heavi-
ly laden, and wait until the repair is
carried out, well away from any dan-
gerous traffic. In the case of uneven
roads or roads on an incline, place
chocks or other suitable materials un-
der the wheels to secure the vehicle.
WARNING
fig. 2F0S079Ab
The kit fig. 11includes:
❒bottle A containing sealer and fitted
with:
– filling pipe B;
– label Cwith the caption “max. 80
km/h”, to be affixed in a place clear-
ly visible for the driver (on the dash-
board) after repairing the tyre;
095-122 ABARTH 500 GB 29-04-2009 9:43 Pagina 98

107
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
YOUR CAR
SAFETY
DEVICES
CORRECT USE
OF THE
CAR
IN AN
EMERGENCY
WHEN NEEDING
TO CHANGE A BULB
GENERAL INSTRUCTIONS
❒Before changing a bulb check the con-
tacts for oxidation;
❒Burnt bulbs must be replaced by oth-
ers of the same type and power;
Modifications or repairs to
the electrical system that are
not carried out properly or do not
take the system’s technical specifica-
tions into account can cause mal-
functions leading to the risk of fire.
WARNING❒Always check the height of the head-
light beam after changing a bulb;
❒When a bulb is not working, check that
the corresponding fuse is intact before
replacing it: refer to the “If a fuse
blows” paragraph in this chapter for
fuse location.
095-122 ABARTH 500 GB 29-04-2009 9:43 Pagina 107

109
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
YOUR CAR
SAFETY
DEVICES
CORRECT USE
OF THE
CAR
IN AN
EMERGENCY
BULB TYPES fig. 19
Various types of bulbs are fitted to your
car:
A All glass bulb: clipped into place. Pull
to extract.
B Bayonet bulbs: to remove this type
of bulb from its holder, press the bulb
and turn it anticlockwise.
C Cylindrical bulbs: release from the
contacts to extract.
D Halogen bulbs: release the fastening
clip from the corresponding seat to re-
move the lamp.
E Halogen bulbs: release the fastening
clip from the corresponding seat to re-
move the lamp. IMPORTANT A slight misting may appear
on the internal surface of the headlight:
this does not indicate a fault and is caused
by low temperature and the degree of hu-
midity in the air. Misting will rapidly dis-
appear when the headlights are switched
on. The presence of drops inside the head-
lights indicates infiltration of water. Go to
a Abarth Dealership.
F0S092Abfig. 19
095-122 ABARTH 500 GB 29-04-2009 9:43 Pagina 109

116
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
IINDEX
YOUR CAR
SAFETY
DEVICES
CORRECT USE
OF THE
CAR
IN AN
EMERGENCY
IF A FUSE BLOWS
GENERALITIES fig. 37
The fuse is a protective device for the
electric system: it comes into action (i.e.
it cuts off) mainly due to a fault or im-
proper action on the system.
Check the efficiency of the corresponding
fuse when a device does not work: the
conducting element Amust not be inter-
rupted. If it is, replace the blown fuse with
another with the same amperage (same
colour).
Bintact fuse.
Cfuse with damaged filament.
To identify the protection fuse, see the
tables in the following pages.
❒open the bulb cover B-fig. 36and re-
place the snap-fitted bulb C;
❒re-close the bulb cover Bon the lens;
❒reinstall the ceiling light properly in-
serting it into its seat on one side first,
and then pressing the other side until it
clicks into position.Never replace a blown fuse
with metal wires or other ma-
terials.
Never replace a fuse with
another having higher am-
perage; FIRE HAZARD.
In case of general protection fuse in-
tervention (MEGA-FUSE, MIDI-FUSE,
MAXI-FUSE) contact Abarth Dealer-
ship.
Remove the key from the ignition
switch and switch off all loads before
replacing a fuse.
WARNING
Should the fuse blow again,
contact Abarth Dealership.
WARNING
fig. 36F0S109Abfig. 37F0S110Ab
095-122 ABARTH 500 GB 29-04-2009 9:43 Pagina 116

118
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
IINDEX
YOUR CAR
SAFETY
DEVICES
CORRECT USE
OF THE
CAR
IN AN
EMERGENCY
Engine compartment control unit
fig. 40 e 41
A second control unit is located on the
right side of the engine compartment, next
to the battery; to access it press device I,
release tabs Mand remove cover L.
The ID number of the electrical compo-
nent corresponding to each fuse can be
found on the back of the cover.
If you need to wash the en-
gine compartment, take care
not to directly hit the engine
compartment control unit
with the water jet.
fig. 40
fig. 41F0S113Ab
F0S114Ab
095-122 ABARTH 500 GB 29-04-2009 9:43 Pagina 118

122
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
IINDEX
YOUR CAR
SAFETY
DEVICES
CORRECT USE
OF THE
CAR
IN AN
EMERGENCY
TOWING THE CAR
The tow ring provided with the car is
housed in the tool box under the boot
mat.
FASTENING THE TOW
RING fig. 42-43
Proceed as follows:
❒release the cap A(only present in the
rear section Fig. 43);
❒take the tow hook Bfrom its seat in
the tool support;
❒tighten the ring on the rear or front
threaded pin.
Before beginning the tow,
turn the ignition key to MAR
and then to STOP, without extract-
ing it If the key is extracted, the steer-
ing wheel lock will be automatically
activated, thus preventing steering
WARNING
Because of the vehicle con-
formation, it cannot be
loaded onto railway carriages and
transported.
WARNING
The power brakes and the
electrical power steering will
not work while the car is being towed.
More effort on the brake pedal and
steering wheel will therefore be re-
quired. Do not use wires for towing.
Do not jerk. Make sure not to dam-
age parts in contact with the car
while towing. Respect the specific
rules of the Highway Code when tow-
ing the car specifically in relation to
the towing device and the behaviour
to maintain on the road.
Do not start the engine while towing
the car.
WARNING
fig. 42

F0S115Abfig. 43

F0S116Ab
095-122 ABARTH 500 GB 29-04-2009 9:43 Pagina 122

30 60 90 120 150 180
●●●●● ●
●●●●● ●
●●●●● ●
●●
●
●●●●● ●
●●●●● ●
●●
●●●●● ●
●●●
●●●●● ●
●●●●● ●
126
WARNING
LIGHTS AND
MESSAGES
TECHNICAL
SPECIFICATIONS
INDEX
YOUR CAR
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
Thousands of kilometres
Check rear disk brake pad conditions and wear
Replace the air filter cartridge
Top up fluids (engine coolant,
brakes, windscreen washer, battery, etc.)
Check the conditions of the distribution control toothed belt
Replace the distribution control toothed belt (*)
Replace the spark plugs (❍)
Check engine control system operation
(through diagnosis socket)
Check the mechanical gearbox oil level
Change engine oil and replace oil filter (or every 24 months)
Change brake fluid (or every 24 months)
Change the pollen filter (or anyway every year)
Check emissions at the exhaust
(*) Regardless of the km covered, the timing belt shall be replaced every 4 years for particularly demanding use (cold climates,
driving in the city, idling for a long time) or in any case every 5 years
If the car is mainly used for driving in the city, and in any case with an annual mileage of below 10,000 km, change
engine oil and filter every 12 months.
(❍) In order to ensure correct efficiency and avoid damaging the engine, it is necessary to:
- exclusively use certified spark plugs specific for the 1.4 TB BZ Abarth engines. All candles to be fitted must be
of the same type and same manufacturer (see recommendations reported in the “Engine” paragraph);
- strictly respect the candles’ Scheduled Maintenance Plan;
- it is recommended to apply to Abarth Dealership.
123-140 ABARTH 500 GB 29-04-2009 9:44 Pagina 126

129
WARNING
LIGHTS AND
MESSAGES
TECHNICAL
SPECIFICATIONS
INDEX
YOUR CAR
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
Engine oil consumption
The maximum engine oil consumption is
usually 400 grams every 1000 km.
When the car is new, the engine needs
to run in, therefore the engine oil con-
sumption can only be considered stabilised
after the first 5,000 ÷ 6,000 km.
IMPORTANT The oil consumption de-
pends on driving style and the conditions
under which the car is used.
IMPORTANT After adding or changing
the oil, let the engine turn over for a few
seconds and wait a few minutes after turn-
ing it off before you check the level. ENGINE OIL fig.1
Check the oil level a few minutes (about
5) after the engine has stopped, with the
car parked on level ground.
The oil level shall be included between the
MIN and MAX marks on the dipstick B.
The range between the MIN and MAX
levels corresponds to approximately 1
litre of oil.
If the oil level is near or even under the
MIN line, add oil through the filler Ato
reach the MAX line.
Oil level shall never exceed the MAX line.
Proceed very carefully inside
the engine compartment
when the engine is hot: risk of burns.
Remember that the fan may start up
if the engine is hot: risk of injury. Pay
attention to scarves, ties and other
loose fitting garments: they might get
caught by moving components.
WARNING
Don’t add any oil having dif-
ferent characteristics from
those of the existing engine oil.
The exhausted engine oil and
the replaced oil filter contain
substances that may be dan-
gerous for the environment. It
is advisable to have oil and filters
changed by a Abarth Dealership where
they will be disposed of according to
the law.
123-140 ABARTH 500 GB 29-04-2009 9:44 Pagina 129

143
WARNING
LIGHTS AND
MESSAGES
INDEX
YOU CAR
SAFETY
DEVICES
CORRECT USE
OF THE
CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CHASSIS MARKING fig. 3
The plate is to be found on the right side
of the boot floor and it bears the follow-
ing identification data:
❒car model ;
❒chassis number.ENGINE MARKING
Engine marking is stamped on the cylinder
block and includes the model and the
chassis number.
BODYWORK PAINT
IDENTIFICATION PLATE fig. 2
The plate is applied on the external tail-
gate post (left side) and it bears the fol-
lowing data:
APaint manufacturer.
BColour name.
CFiat colour code.
DRespray and touch up code.
fig. 2F0S125Abfig. 3F0S126Ab
141-159 ABARTH 500 GB 29-04-2009 9:44 Pagina 143

145
WARNING
LIGHTS AND
MESSAGES
INDEX
YOU CAR
SAFETY
DEVICES
CORRECT USE
OF THE
CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
ENGINE
GENERAL
Engine code
Cycle
Number and layout of cylinders
Piston bore and stroke mm
Total displacement cm3
Compression ratio
Maximum power (EEC) kW
HP
corresponding ratio rpm
Maximum torque (EEC) Nm
corresponding ratio rpm
Spark plugs
Fuel
1.4 TB BZ ABARTH
312A1000
Otto
4 in line
72 x 84
1368
9.8 : 1
99
135
5500
NORMAL SPORT
180 206
4500 3000
IKR9F8
Unleaded
petrol 95 R.O.N.
141-159 ABARTH 500 GB 29-04-2009 9:44 Pagina 145