heating Abarth 500 2015 Owner handbook (in English)
[x] Cancel search | Manufacturer: ABARTH, Model Year: 2015, Model line: 500, Model: Abarth 500 2015Pages: 215, PDF Size: 19.08 MB
Page 13 of 215
GETTING TO KNOW YOUR CAR
In-depth knowledge of your new vehicle
starts here.
The handbook that you are reading
simply and directly explains how it
is made and how it works.
That’s why we advise you to read it
seated comfortably on board, so that
you can see what is described here for
yourself.SYMBOLS ...................................... 10
FIAT CODE SYSTEM ....................... 10
THE KEYS....................................... 11
IGNITION SWITCH .......................... 14
SEATS ............................................ 15
HEAD RESTRAINTS ........................ 17
STEERING WHEEL ......................... 18
REAR VIEW MIRRORS .................... 19
CLIMATIC COMFORT ..................... 21
HEATING AND VENTILATION.......... 22
MANUAL CLIMATE CONTROL
SYSTEM ......................................... 24
AUTOMATIC CLIMATE CONTROL
SYSTEM ......................................... 26
EXTERNAL LIGHTS......................... 30
WINDOW CLEANING ...................... 32
ROOF LIGHTS ................................ 33
CONTROLS .................................... 34
INTERIOR FITTINGS ....................... 36
FIXED GLASS ROOF ....................... 40
ELECTRIC SUN ROOF .................... 40
DOORS ........................................... 42
ELECTRIC WINDOWS .................... 44
LUGGAGE COMPARTMENT ........... 45
BONNET ......................................... 48
ROOF RACK/SKI RACK .................. 50
HEADLIGHTS.................................. 51ESC SYSTEM ................................. 52
ITPMS (INDIRECT TYRE
PRESSURE MONITORING
SYSTEM) ........................................ 56
EOBD SYSTEM............................... 59
DUALDRIVE ELECTRIC POWER
STEERING ...................................... 59
RADIO SYSTEM .............................. 60
ACCESSORIES PURCHASED BY
THE OWNER................................... 60
PARKING SENSORS....................... 62
REFUELLING THE CAR .................. 64
PROTECTING THE
ENVIRONMENT .............................. 65
9
Page 26 of 215
HEATING AND VENTILATION.
CONTROLS
24AB0A0222
22
GETTING TO KNOW YOUR CAR
Page 32 of 215
Buttons(temperature
setting)
When the button
is pressed, the
temperature requested in the
passenger compartment rises until the
value HI is reached (maximum heating).
When the button
is pressed, the
temperature requested in the
passenger compartment decreases
until the value LO is reached (maximum
cooling).
IMPORTANT If the heating fluid
temperature is not sufficiently high, the
maximum fan speed does not come
on straight away in order to limit the
intake of insufficiently hot air into the
passenger compartment.Buttons
(fan speed
adjustment)
When the buttons
orare pressed,
the fan speed, shown by the switching
on of lit bars on the display, increases
or decreases.
The fan can be cut off only if the
compressor has been switched off
button).
To restore automatic fan speed control,
press the AUTO button.
Buttons
(manual air
distribution selection)
By pressing the buttons, one of the five
possible air flow distribution patterns
can be selected:
air flow to the windscreen and front
side window diffusers to demist
or defrost them.
air flow to central and side
dashboard vents to ventilate the
chest and the face during the hot
season.
air flow to the front seat feet area
diffusers. Due to the natural
tendency of heat to spread
upwards, this type of distribution
warms the passenger
compartment up as quickly as
possible, providing an immediate
feeling of warmth.
+distribution between feet area
diffusers (warmest air) and
dashboard diffusers (coolest
air).
+distribution between feet area
diffusers and windscreen/
front side window diffusers.
This type of distribution
achieves effective heating of
the passenger compartment
and prevents the windows
from misting up.
The set air distribution is shown by the
LEDs on the selected buttons coming
on.
To restore the automatic air distribution
control, press the AUTO button.
28
GETTING TO KNOW YOUR CAR
(
Page 33 of 215
Button(front window
fast demisting/
defrosting)
When button
is pressed, the
climate control system activates all the
functions required for fast demisting/
defrosting:
❒compressor on (if the weather
conditions are suitable);
❒air recirculation off;
❒maximum air temperature setting (HI);
❒fan speed determined according to
the coolant temperature;
❒air flow conveyed to the windscreen
and front side windows;
❒heated rear window on.
IMPORTANT The function remains
active for approximately 3 minutes after
the coolant temperature exceeds 50°C.
SYSTEM SERVICING
In winter, the climate control system
must be turned on at least once a
month for about 10 minutes.
Have the system inspected at an
Abarth Dealership before the summer.
2)
HEATED REAR WINDOW
DEMISTING/DEFROSTING
Press button
to activate: when this
function is activated, the button LED
switches on.
This function is timed and it will turn off
automatically after about 20 minutes.
Press the
button again to switch
the function off in advance.
IMPORTANT Do not apply stickers on
the inside of the rear window over
the heating filaments to avoid damage.
IMPORTANT
2) The system uses R134a coolant
which does not pollute the
environment in the event of
accidental leakage. Never use R12
fluid which is not compatible
with the system components.
29
Page 63 of 215
EOBD SYSTEM
The EOBD (European On Board
Diagnosis system) carries out a
continuous diagnosis of the
components of the car related to
emissions. It also alerts the driver, by
turning on the warning light
on the
instrument panel together with relevant
message on the display, when these
components are no longer in peak
conditions (see chapter "Warning lights
and messages").
The goal of the system is to:
❒monitor system efficiency
❒indicate an increase in emissions due
to vehicle malfunction
❒indicate the need to replace
damaged components.
The system also has a connector that
can be interfaced with appropriate
equipment, which makes it possible to
read the error codes stored in the
control unit together with a series of
specific parameters for engine
operation and diagnosis.
IMPORTANT After eliminating the
failure, to check the system completely,
Abarth Dealerships must run a bench
test and, if necessary, road tests which
may also call for a long journey.
DUALDRIVE
ELECTRIC POWER
STEERING
(for versions/markets, where provided)
OPERATION
This only operates with the ignition key
turned to MAR-ON and the engine
started.
Electric power steering allows the force
required at the steering wheel to be
adapted to the driving conditions.
IMPORTANT When turning the ignition
key quickly, full power steering
functionality can be achieved after a
few seconds.
When the SPORT function is turned on
(see "Controls" paragraph in this
chapter) the electric power steering
assistance is altered, increasing the
sensitivity of the steering wheel.
54) 55)
IMPORTANT During parking
manoeuvres requiring a lot of steering,
the steering may become harder: this is
normal and is due to the intervention
of the system to protect the electric
steering motor from overheating, so no
repair is required. When the car is
used again later on, the power steering
will work normally.
WARNING
54) It is absolutely forbidden to carry
out any after-market operation
involving steering system or
steering column modifications
(e.g. installation of anti-theft
device) that could adversely affect
performance and safety,
invalidate the warranty and also
result in the car not meeting
type-approval requirements.
55) Before servicing the car, switch
off the engine and remove the key
from the ignition switch to
activate the steering lock. This is
especially important when the car
wheels are not touching the
ground. If this is not possible (for
example if the key needs to be
turned to MAR-ON or the engine
must be running), remove the
main fuse that protects the
electric power steering.
59
Page 109 of 215
69) Removing or otherwise
tampering with seat belt and
pretensioner components is
strictly prohibited. Any operations
on these components must be
performed by qualified and
authorised technicians. Always
contact an Abarth Dealership.
70) If the belt has been subjected to
a high level of stress, for example
after an accident, it must be
completely replaced together with
the attachments, attachment
fixing screws and the
pretensioner. In fact, even if the
belt has no visible defects, it could
have lost its resilience.
IMPORTANT
15) Operations which lead to
impacts, vibrations or localised
heating (over 100°C for a
maximum of six hours) in the area
around the pretensioner may
damage or deploy it. Contact an
Abarth Dealership should
intervention be necessary on
these components.
CARRYING
CHILDREN SAFELY
For optimal protection in the event of an
impact, all occupants must be seated
and wearing adequate restraint
systems, including newborn and
children!
This prescription is compulsory in all EC
countries according to EC Directive
2003/20/EC.
Compared with an adult, a child's head
is larger and heavier in proportion to
their body and the child's muscular and
bone structures are not fully developed.
Therefore, correct restraint systems
other than adult seat belts are
necessary to reduce as much as
possible the risk of injuries in case of
accident, braking or sudden
manoeuvre.
Children must be seated safely and
comfortably. Depending on the
characteristics of the child restraint
systems used, you are advised to keep
children in rear facing child restraint
systems for as long as possible (at least
until 3–4 years old), since this is the
most protected position in the event of
an impact.
71) 72) 73)
16)
The choice of the most suitable child
restraint device depends on the weight
of the child; there are various types of
child restraint systems and you are
advised always to choose the one that
is most suitable for the child.
When over 1.50 m in height, from the
point of view of restraint systems,
children are considered as adults and
wear seat belts normally.
In Europe the characteristics of child
restraint systems are ruled by the
regulation ECE-R44, dividing them into
five weight groups:
Group Weight range
Group0 upto10kg
Group 0+ up to 13 kg
Group 1 9-18 kg
Group 2 15-25 kg
Group 3 22-36 kg
105
Page 137 of 215
CHECKING AND
RESTORING TYRE
PRESSURE
The compressor may also be used for
checking and possibly restoring tyre
pressure.
Proceed as follows:
❒if the spray bottle A fig. 103 is
connected to the compressor, you
need to press the release button L to
remove it;
❒connect the pipe to the tyre valve;
❒check the pressure on the pressure
gauge;
❒if the value of the pressure is too low,
fit the electric plug in the cigar-lighter
socket and switch on the
compressor.
IMPORTANT To adjust the possible
overpressure of the tyre, press the air
release button M.
IMPORTANT
24) Punctures caused by foreign
bodies can be repaired if the
damage does not exceed 4 mm in
diameter on the tread and on
the shoulder of the tyre
.
WARNING
105) Give the booklet to the
technicians who will be handling
the tyre that was treated using
the Fix&Go kit.
106) Punctures on the sides of the
tyre may not be repaired. Do not
attempt to use the Fix&Go kit if
the tyre was damaged as a result
of being used when underinflated.
107) If the wheel rim has been
damaged (bent so as to cause air
to leak), the wheel cannot be
repaired. Do not remove foreign
bodies (screws or nails) from
the tyre.
108) Do not operate the compressor
for longer than 20 minutes
consecutively. Risk of
overheating. The Fix&Go kit is not
suitable for definitive repairs, so
the repaired tyres may only be
used temporarily.
103AB0A0086
133
Page 169 of 215
RUBBER HOSES
As far as the maintenance of the brake
system and fuel supply system rubber
hoses is concerned, follow the
"Scheduled Servicing Plan" in this
chapter carefully.
Ozone, high temperatures and
prolonged lack of fluid in the system
may cause hardening and cracking of
the hoses, with possible leaks. Careful
checking is therefore necessary.
WINDSCREEN/REAR
WINDOW WIPER
BLADES
Replace the blades if the rubber edge is
deformed or worn. In any case, it is
advisable to replace them
approximately once a year.
144)
A few simple precautions can reduce
the possibility of damage to the blades:
❒if the temperature falls below zero,
make sure that ice has not frozen
the rubber against the glass. Use a
de-icing product to release it if
required;
❒remove any snow from the glass: in
addition to protecting the blades,
this prevents effort on the motor and
overheating;
❒do not operate the windscreen and
rear window wipers on dry glass.REPLACING THE
WINDSCREEN WIPER
BLADES
Proceed as follows:
❒raise the wiper arm A fig. 130 and
position the blade so that it forms
an angle of 90° with the arm;
❒press the button A and extract the
blade C fig. 130 from the arm B
fig. 130;
❒insert the new blade making sure it is
locked into place.
130AB0A0112
165
Page 172 of 215
Dry the less visible parts with special
care, such as the door frames, bonnet
and the headlight frames, where water
may stagnate more easily. The car
should not be taken to a closed area
immediately, but left outside so that
residual water can evaporate.
Do not wash the car after it has been
left in the sun or with the bonnet hot:
this may alter the shine of the
paintwork.
Exterior plastic parts must be cleaned
in the same way as the rest of the car.
Where possible, do not park under
trees; the resinous substance that
many species release give the paint a
dull appearance and increase the
possibility of triggering rusting
processes.
IMPORTANT Bird droppings must be
washed off immediately and thoroughly
as the acid they contain is particularly
aggressive.
5)
34)
Windows
To clean glasses, use specific cleaning
products.
Use clean cloths to avoid scratching
the glass or damaging the
transparency.
IMPORTANT Wipe the rear window
inside gently with a cloth following the
direction of the filaments to avoid
damaging the heating device.
Headlights
Use a soft cloth soaked in water and
detergent for washing cars.
IMPORTANT Never use aromatic
substances (e.g. petrol) or ketones (e.g.
acetone) for cleaning the plastic lenses
of the headlights.
IMPORTANT When cleaning with a
pressure washer, keep the water jet at
least 20 cm away from the headlights.Engine compartment
Wash the engine compartment
thoroughly at the end of every winter.
Be careful not to direct the jet of water
onto electronic control units.
Adequately protect the upper air
intakes to prevent damage to the
windscreen wiper motor. Have this
operation performed at a specialised
workshop.
IMPORTANT The washing should take
place with the engine cold and the
ignition key in the STOP position. After
the washing operation, make sure
that the various protections (e.g. rubber
caps and guards) have not been
removed or damaged.
IMPORTANT
5) Detergents cause water pollution.
The vehicle should be washed in
areas equipped for collecting
and purifying the liquid used in
the washing process.
168
SERVICING AND MAINTENANCE
Page 212 of 215
Front airbags .................................. 114
Front light clusters (bulb
replacement) ................................ 139
Front roof light ................................ 33
Fuel consumption .......................... 191
Fuel cut-off system......................... 35
Fuel supply..................................... 175
Fuel tank plug ................................ 65
Fuse boxes (location) ..................... 144
Fuses (replacement) ....................... 144
Gear Shift Indicator (system) ......... 69
Glove compartment ....................... 37
Handbrake.................................... 123
Hazard warning lights..................... 35
HBA system ................................... 54
Headlight alignment corrector ........ 51
Headlights (adjusting headlights
abroad) ........................................ 52
Headlights...................................... 51
Headlights (washing) ...................... 168
Head restraints............................... 17
– Rear head restraints .................. 17
Heated rear window (activation) ..... 25
Heating and ventilation ................... 22
Hill Holder system .......................... 54
Identification data
– bodywork paint plate ................. 172
– chassis marking ........................ 172
– engine marking.......................... 172– identification data plate.............. 172
Ignition switch ................................ 14
Installing electrical/electronic
devices ........................................ 61
Interior fittings ................................ 36
Interior roof light (bulb
replacement) ................................ 142
Interiors (cleaning) .......................... 169
Isofix child restraint system
setup ........................................... 110
iTPMS ............................................ 56
Lifting the car ................................ 149
Lubricants (specifications) .............. 188
Luggage compartment................... 45
– closing ...................................... 45
– extending the luggage
compartment ............................ 46
Luggage compartment light
(bulb replacement) ....................... 143
Luggage compartment light ........... 34
Main beam headlights (bulb
replacement) ................................ 140
Main beam headlights .................... 30
Maintenance and care.................... 154
– heavy-duty use of the car .......... 158
– periodic checks ......................... 158
– scheduled servicing ................... 154
– Scheduled Servicing Plan .......... 155
Manual climate control system ....... 24
– controls ..................................... 24
– maintenance ............................. 25Menu items .................................... 71
MSR system .................................. 54
Number plate lights (bulb
replacement) ................................ 142
Paintwork (maintenance) ............... 167
Parking .......................................... 123
Parking sensors ............................. 62
Passenger side front airbag ............ 115
Performance .................................. 185
Plugs (type) .................................... 174
Pollen filter ..................................... 162
Power socket ................................. 38
Preparation to install a portable
navigation system ........................ 39
Pretensioners ................................. 103
– Load limiters.............................. 103
Protecting the environment ............ 65
Radiofrequency remote control:
ministerial approvals..................... 194
Radio ............................................. 60
Radio transmitters and mobile
phones......................................... 61
Rear light clusters (bulb
replacement) ................................ 141
Rear seats (backrest release).......... 16
Rear view mirrors ........................... 19
Rear window washer (jets).............. 166
Rear window wiper/washer ............ 32
Reconfigurable multifunction
display ......................................... 68
INDEX